Konfigurasi DHCP Server dan DHCP Client pada Router Mikrotik RB 951Ui-2HnD
Summary
TLDRIn this educational YouTube video by Riswan on the Youbi channel, viewers are guided through the process of configuring a DHCP server and client on a MikroTik router. The video begins with a connection setup and a demonstration of resetting the router to default settings using Winbox. Following this, Riswan configures the DHCP client on the router's ether1 interface connected to the internet and sets up the DHCP server on ether2, which is connected to a computer network. The tutorial covers obtaining an IP address automatically through the DHCP client, setting up the DHCP server to assign IP addresses to connected devices, and ensuring internet connectivity for the connected devices by configuring routing and source NAT. The video concludes with a successful demonstration of internet access and a reminder to configure DNS for uninterrupted browsing.
Takeaways
- đ The video demonstrates how to configure a DHCP server and client on a MikroTik router.
- đ§ The presenter uses Winbox, a software provided by MikroTik, to access and configure the router.
- đ» The MikroTik router is reset to factory settings at the beginning of the tutorial.
- đ The router's interfaces are set up to connect to the internet and a local computer network.
- đĄ The DHCP client is configured on the interface connected to the internet (ether1).
- đą The DHCP server is set up on the interface connected to the local computer network (ether2).
- đ The DHCP server is configured with a static IP range, and the router's MAC address is used for identification.
- đ The DHCP client automatically obtains an IP address, gateway, and DNS settings from the DHCP server.
- đ The video shows how to enable IP forwarding to allow internet access through the router.
- đ ïž The tutorial concludes with a demonstration of successful internet browsing, indicating proper configuration.
- đ The video ends with a reminder to follow proper Islamic greetings, reflecting the presenter's cultural context.
Q & A
What is the purpose of the video?
-The purpose of the video is to demonstrate how to configure a DHCP server and DHCP client on a MikroTik router.
What application is used to connect to the MikroTik router?
-The application used to connect to the MikroTik router is Winbox, which can be downloaded from mikrotik.com.
How does one connect to the MikroTik router using Winbox?
-To connect to the MikroTik router using Winbox, one must open Winbox, click on 'New' to create a new connection, select the router, enter the IP address, and log in with the username 'admin' and a blank password.
What is the first step the presenter takes after connecting to the router?
-The first step the presenter takes after connecting to the router is to perform a factory reset by checking 'Reset configuration to default' and clicking 'Yes'.
How does the presenter configure the DHCP client on the router?
-The presenter configures the DHCP client by navigating to 'IP' > 'DHCP Client', adding a new client, selecting the interface 'ether1', and applying the settings.
What is the IP address obtained by the router after setting up the DHCP client?
-After setting up the DHCP client, the router obtains an IP address of 192.168.1.10.
What does the presenter do to enable the DHCP client?
-The presenter enables the DHCP client by clicking on the 'Enable' button in the DHCP Client settings.
How does the presenter configure the DHCP server on the router?
-The presenter configures the DHCP server by navigating to 'IP' > 'DHCP Server', clicking on 'Setup', selecting the interface 'ether2', and following the setup wizard steps.
What IP address range is used for the DHCP server configuration?
-The IP address range used for the DHCP server configuration is 10.20.30.1/24.
How does the presenter ensure that the computer connected to the router can access the internet?
-The presenter ensures internet access by configuring IP forwarding and setting up a NAT rule in the router's configuration.
What is the final step the presenter takes to demonstrate internet connectivity?
-The final step the presenter takes is to test internet connectivity by attempting to browse a website like 'detik.com'.
Outlines
đ Setting Up DHCP Client on MikroTik Router
The speaker begins by greeting the audience and introducing the topic of configuring a DHCP server and client on a MikroTik router. They guide the viewers on how to connect the router to the internet and use the Winbox application for configuration. After connecting, the speaker demonstrates how to log in as an admin and reset the router to default settings. They then proceed to configure the DHCP client on the router's ether1 interface, which is connected to the internet. The speaker explains the steps to add a new DHCP client, select the appropriate interface, and apply the settings. They conclude by showing that the router has successfully obtained an IP address automatically from the DHCP client, highlighting the convenience of not having to manually set the IP address.
đ§ Configuring DHCP Server and Client on MikroTik
In this segment, the speaker focuses on setting up the DHCP server on the MikroTik router. They explain how to configure the IP address for the ether2 interface, which is connected to the local network, and then proceed to set up the DHCP server on the same interface. The speaker walks through the process of creating a DHCP server, selecting the appropriate interface, and defining the IP range that will be assigned to devices on the network. They also demonstrate how to enable the DHCP server and ensure that the computer connected to the router receives an IP address automatically from the DHCP server. The speaker then shows how to configure the computer's network settings to obtain an IP address from the MikroTik router's DHCP server, verifying that the computer has received an IP address and can access the internet.
đ Finalizing DHCP Setup and Testing Internet Connectivity
The final paragraph covers the completion of the DHCP configuration and testing the internet connectivity. The speaker ensures that the DHCP server is set up correctly on the MikroTik router and that the computer is configured to use the DHCP client. They demonstrate how to configure port forwarding on the router to allow internet access for the connected computer. The speaker also shows how to verify that the computer can access the internet by browsing websites. They conclude the tutorial by summarizing the steps taken to configure the DHCP server and client on the MikroTik router and testing the setup's functionality, ending the video with a farewell greeting.
Mindmap
Keywords
đĄDHCP Server
đĄDHCP Client
đĄWinbox
đĄMAC Address
đĄInterface
đĄIP Address
đĄGateway
đĄDNS
đĄFactory Reset
đĄEthernet
đĄNAT
Highlights
Introduction to configuring a DHCP server and client on a MikroTik router.
Preparation and connection of the MikroTik router to the internet.
Downloading and using Winbox to connect to the MikroTik router.
Remote login to the MikroTik router as an administrator.
Resetting the MikroTik router to default settings.
Reconnecting to the MikroTik router after the reset.
Configuring the DHCP client on the MikroTik router's ether1 interface.
Enabling the DHCP client to automatically obtain an IP address.
Verification of the automatically obtained IP address from the DHCP client.
Explanation of the DHCP client's function to simplify IP address configuration.
Setting up the DHCP server on the MikroTik router's ether2 interface.
Configuring the IP address for the ether2 interface connected to the computer.
Creating a DHCP server pool and assigning IP addresses to connected devices.
Enabling the DHCP server to start assigning IP addresses.
Adjusting the computer's network settings to use the DHCP client.
Obtaining an IP address from the MikroTik DHCP server by the connected computer.
Configuring NAT and firewall rules to allow internet access through the MikroTik router.
Testing internet connectivity after the DHCP server and client configuration.
Conclusion and closing remarks on configuring DHCP on MikroTik routers.
Transcripts
Halo assalamualaikum warahmatullahi
wabarokatuh jumpa lagi dengan saya
Riswan di channel YouTube Youbi pada
video kali ini saya akan mempraktekkan
cara konfigurasi DHCP server dan DHCP
client pada router mikrotik eh sudah
saya siapkan perutnya dan sudah saya
sambungkan kepekaan dan ke internet coba
kita buka dengan menggunakan aplikasi
Winbox ke yang belum memperoleh aplikasi
Winbox bisa didownload melalui
mikrotik.com Oke kita buka Winbox ya eh
di sini sudah saya sambungkan mikrotik
ke komputer ya dimana terlihat di sini
method inilah rb951ui 2hnd Coba kita
remote terlebih dahulu login sebagai
admin
halo passwordnya kosong kemudian
kognitif
hai oke sekarang sudah kita remote
mikrotik nya sekarang saya coba reset
dulu masuk ke sistem kemudian reset
configuration di ceklis nol default
configuration dan do not backup Keh
kemudian reset Yes kita tunggu sebentar
oke sedang melakukan reset jadi
mikrotiknya akan rystad jadi ini kita
matikan terlebih dahulu oke nanti kita
coba remote kembali
okeh sudah bisa dirimu ada muncul enggak
oke sudah muncul Oh kita harimau kembali
mikrotiknya dengan menggunakan MAC
address ke ini adalah Mac addressnya
jadi sama ya dengan MAC address yang ada
di sini login sebagai admin passwordnya
kosong langsung klik connect oke
sekarang sudah masuk ke interface
mikrotik yang kita remote Nah kita
disini akan mengkonfigurasi DHCP server
dan DHCP client oke oke di interfacenya
ya oke yang terhubung ke ether1 ini
sudah running ini kita buat terhubung ke
jaringan internet oke Apple Oke kemudian
ether2 ini terhubung ke jaringan
komputer
hai oke Apple oke nah yang ke internet
kita buat DHCP client dan yang ke
komputer kita buat DHCP server Keh
caranya adalah masuk ke IP kemudian
dhcp-client kek jadi cara setting DHCP
client adalah langsung diklik ID
kemudian di AJB klien Oke Langsung
ditambahkan ini ada tempat tambah
kemudian pilih interfacenya ether1
internet jadi yang kece satu internet
yang kita buat dcp klien selanjutnya
apply kemudian Ok dia akan terlipat
[Musik]
akhir-akhir ini masih posisi stop ya
kita enable kan dulu oke dia akan
searching sudah Bond kita lihat IP
address-nya Berapa IP address-nya adalah
1921681.1 puluh Oke Eh itu untuk IP
addressnya Keh jadi kita sudah
memperoleh aib secara otomatis karena
kita menggunakan DHCP client itu
sebenarnya fungsi dari DHCP client jadi
kita tidak repot-repot setting IP
address Coba kita lihat yay IP address
dari ether1 ini sudah langsung nampak
disini 1.10 ini ada huruf d artinya a
dynamic jadi otomatis diperoleh dari
server ke dari server jadi ada di sana
server dibuat di internetnya yaitu
dcp server makanya dia bisa memperoleh
ID dari DJP server.key ip-nya sudah ada
tentu DNS juga sudah ada kayak ginilah
DNS nya 202.134 titik 0.15 dan 8.8.8
tilapan Oke kemudian otomatis juga kita
peroleh gituin keyp root kemudian ada
sini Klik di sini begitu ini adalah ini
ada Gateway 192.1 68.1.1 oke nah eh
kemudian Sekarang kita coba untuk
setting DHCP server
Hai Oke kita buat like server pada
komputer ether2 ether2 komputer sehingga
nanti komputer yang saya gunakan ini
memperoleh IP secara otomatis dari
ether2 router mikrotik Oke caranya masuk
ke IP kemudian DHCP server tadi dcv
kliennya sekarang kita masuk ke DHCP
server eh sebentar sebelum ke mari kita
buat dulu aib address masuk dulu ya
untuk konfigurasi DHCP server kita
konfigurasi dulu ip-nya terlebih dahulu
ip pada ether2 komputer kayak masuk ke
aib kemudian address kita tambahkan kita
masukkan misalnya ipnya 10.20.30 titik
satu selesai 24 interfacenya adalah
header2 kek
Ayo kita masukkan dulu HIV pada ether2
kemudian apply kemudian klik ok ip pada
ether2 sudah dibuat sekarang kita
setting DHCP server pada ether2 ke
caranya masuk ke ID kemudian dia CP
server eh untuk konfigurasinya langsung
di setup yaitu klik DCT setup disini
Tentukan DHCP servernya yang mana
interfacenya saya buat disini adalah
ether2 komputer Oke kemudian next
kemudian next next saja Oke next
Kya gampang next next aja Oke next
kemudian oke nah sekarang dia CV server
pada router mikrotik sudah kita buat
tapi laptop belum di setting ya komputer
belum disetting masuk ke Open Network in
internet setting kita lihat internetnya
kemudian change adapter absen masuk ke
ethernet yang digunakan komputer saya
gunakan ethernet ya properties kita
lihat dengan turun ip-nya di sini dia
paint oke di sini aku time kemudian
disini juga ada Time I
Hai kemudian Oke jadi kalau mau setting
secara manual pakai ini use the
following IP address Oke Jadi ketikan
disini fans-nya jadi kalau mau
menggunakan DHCP client atau otomatis
pilih yang abstain kayak jadi ini enggak
bisa jadi enggak usah diketik lagi nanti
oke kan oke kita lihat ya Airnya sudah
dapat ya pilih yes di sini kita lihat ya
caranya klik dua kali disini kemudian
klik detail ip-nya adalah 10 20 30 titik
254 jadi Sudah diperoleh ip-nya dari
DHCP server tadi yang ada pada router
mikrotik eh eh
Hai ip-nya yang ini kemudian default
gatewaynya 1020 30.1 DNS nya 202.134
00.15 dan 8.8.8 titik 8 oke nah supaya
komputer bisa terhubung ke internet kita
harus seting Ahnaf ya supaya internet
bisa dibagi oleh mikrotik ke komputer
karena kalau bengkak dibuat Misalnya ini
jadi belum bisa browsing deh misalnya
YouTube Oke belum bisa jadi kita buat
disini not masuk eigrp file word not
Kemudian ditambahkan Kenya src-nat out
interfacenya adalah ether1 dari
internetnya asal internetnya itu untuk
out
Hai interface actionnya jangan lupa
dibuat meski uret Oke apply kemudian Ok
Sekarang kita coba untuk browsing
internet sudah bisa detik.com Oke sudah
bisa juga kayak kira-kira seperti itu
cara konfigurasi IP eh sorry cara
konfigurasi DHCP server dan DHCP client
pada router mikrotik eh saya akhiri
Assalamualaikum warahmatullahi
wabarakatuh ya
Voir Plus de Vidéos Connexes
Cara setting Router Mikrotik agar komputer Client bisa terkoneksi internet dengan DHCP SERVER
CARA KONFIGURASI MIKROTIK AWAL (KONEKSI INTERNET)
How to configure DHCP server | DHCP server configuration step by step
Install and Configure DHCP Server in Windows Server 2019 Step By Step Guide
How to Make Virtual Machines Talk to Each Other in VirtualBox
How to setup RADIUS in MikroTik (HapLite) and Windows Server
5.0 / 5 (0 votes)