Cara Setting IP Dinamis menggunakan Cisco Packet Tracer #SMKTELKOMPWT

Summary

This tutorial, presented by Mohamad Lukmano, provides a step-by-step guide on how to create a network using Cisco Packet Tracer. The process includes setting up five PCs, connecting them through a switch, and linking the PCs to a server. Instructions are given on configuring the server and PCs with static IP addresses to enable connectivity. The tutorial concludes with a check to ensure the network is functioning correctly by pinging the server from a PC. The video aims to demonstrate the basics of network configuration for beginners.

Takeaways

• 😀 Introduction: The speaker introduces themselves, mentioning their name, class, and that they will explain how to create a network using Cisco Packet Tracer.
• 😀 Step 1: Open Cisco Packet Tracer to begin the network creation process.
• 😀 Step 2: Select 'Generic' to start the setup for a new network and create five PCs for the network.
• 😀 Step 3: Add a switch to connect each computer to the server.
• 😀 Step 4: Choose a 'Generic Server' and place it above the switch.
• 😀 Step 5: Connect the switch to the server using a cable, selecting the appropriate FastEthernet ports.
• 😀 Step 6: Connect each PC to the switch using cables, one by one.
• 😀 Step 7: Configure the server by setting the gateway and server IP address, either automatically or manually.
• 😀 Step 8: Copy the server’s IP address, open Notepad, and paste it for future reference.
• 😀 Step 9: Set up the PCs by selecting 'Static' IP configuration and entering the IP addresses, including the gateway.
• 😀 Step 10: To verify the network connection, use the 'ping' command from the server’s desktop to check the connectivity to the PCs. A successful ping confirms the network is operational.

Q & A

What is the first step in creating a network using Cisco Packet Tracer?

The first step is to open Cisco Packet Tracer and start by selecting the devices you need for your network setup.

How many PCs are needed for the network setup in this tutorial?

Five PCs are used for the network setup in this tutorial.

What device is used to connect the PCs in this network?

A switch is used to connect all the PCs in the network.

How is the server connected to the switch?

The server is connected to the switch using a cable, with **FastEthernet 0** on the server connected to **FastEthernet 1** on the switch.

What is the purpose of the server in this network setup?

The server acts as a central device for managing network traffic and providing services like IP configuration for the connected PCs.

How do you configure the server’s IP address?

You configure the server's IP address either manually or automatically, and you can record the IP address in a Notepad for future reference.

What is the role of the gateway in the server’s IP configuration?

The gateway in the server's IP configuration is set to the server's own IP address, allowing it to act as a point of access for the network.

What configuration is required for the PCs to connect to the server?

Each PC must be configured with a static IP address, which can be set manually by following the same IP address pattern used in the server configuration.

What command is used to check the network connection between the server and the PCs?

To check the network connection, the **ping** command is used in the server's **Command Prompt** with the IP address of the server.

What indicates a successful connection when using the ping command?

A successful connection is indicated by receiving a reply to the ping command, which means the network is properly connected and functional.