How to Install Quarter Rounds For Flooring Installations | Mohawk Performance Accessory

Summary

This video script provides a step-by-step guide on installing quarter round molding for floating floors. It covers measuring, cutting, and fitting the molding, including joining pieces with mitered angles for a seamless transition. The script also addresses installation techniques for both regular and waterproof floors, emphasizing the use of finishing nails, mitered corners, and silicone for water protection. Tips for finishing touches, such as filling nail holes and joints with caulk, are also included for a polished look.

Takeaways

• 📏 Measure the wall length where the quarter round will be installed to determine the required length.
• ✂️ Cut the quarter round to the necessary length if it doesn't span the entire wall.
• 🔗 Join two pieces of quarter round by mitering them at 45-degree angles for a seamless transition.
• 🔨 Secure the quarter round in place using finishing nails.
• 🏠 Test the fit of the quarter round against the wall and base before installation.
• 🛠️ Create corner pieces by mitering both ends at 45 degrees and fitting them together.
• 🔧 Add a small return to the quarter round with glue and nails for a finished look.
• 💧 For wet protect floors, use waterproof quarter round to prevent water penetration.
• 📐 Ensure a perfect 90-degree return joint at door frames for proper water protection.
• 🔪 Wrap the molding around wall abutments using a miter saw and add silicone at all joints.
• 📌 Use a number six or eight bright finish nail to secure the molding at a 30-degree angle and set each nail with a nail punch.
• 🛡️ Finish the installation by filling nail holes and joints with caulk for a clean and uniform appearance.

Q & A

What is the primary purpose of using quarter round in flooring installation?

The primary purpose of using quarter round is to cover the expansion space required when installing floating floors, providing a smooth transition between the floor and the wall.

How should you measure the length of the wall for installing quarter round?

You should measure the entire length of the wall where the quarter round will be installed to determine if the available piece is long enough to span the entire wall or if it needs to be cut to fit.

What is the process for joining two pieces of quarter round if one piece is not long enough?

To join two pieces of quarter round, miter the ends at two 45-degree angles so that they fit together nearly flawlessly.

How do you test the fit of the quarter round against the wall and base?

Place the quarter round against the wall and base to check if it fits properly before installing it.

What type of nails are recommended for securing the quarter round in place?

Finishing nails are recommended for securing the quarter round in place.

How should corner pieces of quarter round be joined?

Corner pieces should be joined by mitering the two ends at 45-degree angles and placing them together.

What is the purpose of creating a small return at the end of the quarter round?

Creating a small return at the end of the quarter round helps to finish the ends neatly and prevent any gaps or irregularities.

How should you fill nail holes and joints after installing the quarter round?

Fill the nail holes and joints with caulk or color-coordinated putty to create a seamless and clean appearance.

What type of quarter round should be used for wet protect floors?

For wet protect floors, waterproof quarter round should be used to prevent water from penetrating the joints.

How should you handle door frames when installing waterproof quarter round?

When installing waterproof quarter round at door frames, make a return and ensure the joint is at a perfect 90 degrees, adding a bead of silicone to prevent water penetration.

What technique should be used to wrap the molding around abutments in the wall?

Use a miter saw to cut the angles in the exact opposite direction from the initial cuts, and add a bead of silicone at all joints to ensure a waterproof seal.

How should the molding be secured to the baseboard during installation?

The molding should be secured to the baseboard using a number six or number eight bright finish nail, nailing at a 30-degree angle and setting each nail with a small nail punch.

What is the final step to achieve a clean uniform appearance after installing the molding?

The final step is to fill each nail hole and joint with caulk to achieve a clean and uniform appearance.