Working with the 3D paint
Summary
TLDRThis tutorial demonstrates how to create a custom sticker using a 3D painter software. It guides the user through the process of capturing a screenshot, pasting it into the software, and then selecting and cropping the desired image. The user is then instructed to create a sticker, adjust its size and placement, and save the final product with a descriptive name. The video ensures the process is user-friendly, with an emphasis on clarity and ease of execution.
Takeaways
- đš Use the 3D painter software to begin the process.
- đ Ensure the software is enabled on your end before starting.
- đ Locate and use the symbol provided in the instructions.
- đŒïž Take a screenshot of the desired image using the print screen button on your keyboard.
- đ Paste the screenshot into the 3D painter using Ctrl+V.
- âïž Cut out the selected part of the image within the painter.
- đ Create a sticker from the selected image portion.
- đïž Adjust the sticker on the drawing page, ensuring it fits within the designated area.
- đ Set the dimensions to 400 pixels by 400 pixels for the drawing area.
- đïž Save the final image as a photo, giving it a descriptive name like 'hibiscus'.
- â»ïž After saving, you can close the current project and move on to the next without saving again.
Q & A
What software is mentioned in the transcript for creating a sticker?
-The software mentioned in the transcript for creating a sticker is the '3D Painter'.
How does one transfer the image from the PDF to the 3D Painter?
-You transfer the image by using the print screen function on your keyboard, then pasting it in the 3D Painter using Ctrl+V.
What is the purpose of using the 'cut' function in the 3D Painter?
-The 'cut' function is used to remove the selected area of the image, allowing you to choose only the desired part of the photo.
How do you create a new sticker in the 3D Painter?
-To create a new sticker, you select the chosen part of the image and then execute or confirm the action, which may be indicated by a button with text like 'done' or 'execute'.
What is the recommended size for creating a new sticker in the 3D Painter?
-The recommended size for creating a new sticker is 400 pixels by 400 pixels.
What should you do if the photo is not fixed properly in the 3D Painter?
-If the photo is not fixed properly, you should select all, delete the current selection, and then add the sticker again.
How do you adjust the position and size of the sticker in the 3D Painter?
-You can move and adjust the sticker by clicking and dragging it to position it nicely within the lines of the 3D Painter's canvas.
What is the suggested naming convention for saving the created sticker in the 3D Painter?
-The suggested naming convention is to save the sticker with a descriptive name, such as 'hibiscus', to easily identify the sticker later.
What should you do when prompted to save changes after closing the current project in the 3D Painter?
-You can choose not to save the changes if you are moving on to the next project or if the current work is complete.
How can you ensure that the image is as large as possible within the sticker's canvas?
-Ensure the image is as large as possible by adjusting its size and position within the canvas, making sure it fits well between the lines of the 3D Painter's canvas.
What is the final step mentioned in the transcript for completing the sticker creation process?
-The final step mentioned is to save the sticker as a photo and then continue working on it or move on to the next project as needed.
Outlines
đš Using 3D Painter for Image Editing
The speaker begins by instructing the use of a 3D painter software, mentioning that it should be straightforward to find and use. They proceed to guide through the process of importing a PDF, selecting a viscous image, and using the print screen function to capture the image. The image is then pasted into the 3D painter, where it's cut and resized to fit a specific area. The speaker discusses creating a sticker from the image, ensuring it covers the entire photo and is saved under a specific name. The process concludes with saving the edited image and moving on to the next task without saving the current work.
Mindmap
Keywords
đĄ3D Painter
đĄSymbol
đĄViscous
đĄPrint Screen
đĄCtrl+V
đĄSticker
đĄ400 Pixels by 400 Pixels
đĄSelect All
đĄSave As
đĄMenu
Highlights
Introduction to using a 3D painter software.
Enabling the 3D painter software on the user's end.
Symbol identification within the software interface.
Instructions for locating the 3D painter software.
Closing the current window to proceed to the next step.
Moving to a PDF and placing a viscous element.
Using the print screen function on the keyboard.
Pasting the screenshot into the 3D painter using Ctrl+V.
Cutting and selecting the desired photo within the software.
Executing or finalizing the photo selection.
Navigating to the sticker creation feature.
Creating a new sticker from the selected photo.
Ensuring the photo is fully visible within the sticker boundaries.
Adjusting the sticker size to 400x400 pixels.
Deleting unwanted elements from the drawing page.
Adding the sticker to the drawing and adjusting its position.
Saving the work as a photo with a descriptive name.
Instructions for closing the software without saving changes.
Continuing to work on the project after saving.
Transcripts
okay so right so first of all you need
to uh use the 3d painter
okay
let's try and see it needs to be here
i don't know if it's gonna find it like
that but
it's enabled in my side my end
um
this is the symbol
okay
um
anyway if you cannot find the software
please let me know but it should be very
straightforward
now you have the software here
i'm going to close this window
and
let's go to the
now we'll take another place the viscous
one okay
and we're gonna move this
away so it won't affect the photo we're
gonna click on print screen on your
uh keyboard bring screen okay
now we're gonna go move on to the
painter we're gonna click ctrl v to
drop it here
now cut
cut and then we're going to just choose
the photo
right as we want
and
execute or done i don't know this button
here
now we have this thing
we're going to go to this sticker
and going to create a sticker
so
choose
we're going to
check everything like to click on the
mouse and not leave it until you're
going to find all the photo and then
make a sticker
one sticker is made we're gonna go to
the this button here making about the
drawing uh page
we're gonna make sure those are not
selected
400
pixels on 400 pixels
enter
now the photo is already fixed so we
don't need to use it but if it won't be
well we're gonna
click on choose
select all and click on delete
then come again to the stickers
add the sticker
then we can just move it and play with
that to have it very nicely
big photo as much as possible
in between of those lines then
menu
save as
photo
then we're gonna drop and say hibiscus
something like that i'm hoping that i'm
right yeah i'm right and save
now after that
you can continue working on that when
you're going to close on this button you
ask you want to save it you don't need
to save it
and you move on to the next one
okay
Voir Plus de Vidéos Connexes
How to Make Stickers to Sell with AI Artificial Intelligence Midjourney App and Photoshop
How to Create a Custom Windows 10 Image For Deployment | How to Make a Custom Windows 10 ISO
Flow Chart or User Flow in UX design | Phase 2 | 14
CARA MUDAH MEMBUAT ABSEN QR CODE
User ID tracking with Google Analytics 4 and Google Tag Manager
CapCut Tutorial: How to Create EPIC FILM with Ai
5.0 / 5 (0 votes)