[TUTORIAL 1] DASAR MENGGUNAKAN TOTAL STATION TOPCON GM-101 SERIES | ANAK TEKNIK
Summary
TLDRThis video tutorial explains how to use a total station for surveying tasks. Starting with unboxing the equipment, the video walks through turning on the device, setting up without a tripod, and configuring the instrument for precise measurements. It demonstrates setting up jobs, inputting coordinates, and adjusting settings such as azimuth and height. The presenter emphasizes accuracy during fieldwork, offering a step-by-step guide for topographic measurements. The video also highlights configuring various data modes like angle, distance, and coordinate data, ensuring users can capture accurate survey results efficiently.
Takeaways
- 🔌 The first step in using the Total Station is to power it on by pressing the power button on the bottom right corner.
- 🛠️ If using a tripod, it's crucial to adjust the tripod and the Total Station's leveling bubble to ensure accurate measurements.
- 🎯 The device's crosshair must be positioned precisely, with a recommended precision of less than one second for accurate readings.
- 📋 In the field, make sure to maintain high accuracy, ideally achieving zero or minimal error for data collection.
- 🔍 The configuration menu allows the user to set various options like observation conditions, distance measurement modes, and angles.
- 💾 Data can be downloaded using the USB menu, and job data can be managed under the configuration settings.
- 📐 Users can set observation modes like vertical distance and height of the instrument, which can be tailored based on the task.
- 📝 To start a job, users need to create or select a job from the available list and input required details like coordinates and instrument height.
- 🌍 The device can work with both local and global coordinates, allowing flexibility depending on the project requirements.
- 🧭 The Total Station can measure angles and distances based on either known coordinates or azimuths, which can be aligned using a compass for directional accuracy.
Q & A
What is the first step when using the total station device?
-The first step is to power on the device by pressing the power button located on the right side of the device.
Why is using a tripod recommended when operating the total station?
-Using a tripod ensures the device is stable and allows for accurate leveling, which is essential for precise measurements. It helps avoid any shaking or movement during the survey.
How do you adjust the leveling of the total station?
-To adjust the leveling, you can use the screws on the base of the device to position the leveling bubble in the center of the circle on the screen.
What does the 'Escape' button do during the setup process?
-The 'Escape' button is used to exit the current screen or setting and return to the main menu where you can adjust settings like cutting adjustments or start observations.
How can you ensure precise angle settings during measurements?
-For precise angle settings, it is recommended to aim for a reading below one second of accuracy. The device should be calibrated carefully, especially when using a tripod.
What is the purpose of the 'Observation Condition' settings?
-The 'Observation Condition' settings allow the user to configure parameters like angle, distance, reflector settings, and atmospheric conditions for more accurate measurements.
How can you create or select a new job for data collection?
-To create or select a job, navigate to the 'Job Selection' menu, choose 'New Job,' name the job, and set the necessary parameters, such as coordinates and scaling.
What is the role of the 'F4' button during configuration?
-The 'F4' button is used to enter configuration settings, such as adjusting observation conditions, configuring the device, and preparing it for data collection.
How do you input the coordinates when setting up the device for measurements?
-Coordinates can be entered manually if known, or local coordinates can be used, such as 1000, 1000, and 100 for the X, Y, and Z values if no external data is available.
How do you set up the orientation of the total station for topographic measurements?
-To set up the orientation, point the device in the direction of true north using a compass, and adjust the horizontal angle to zero using the fine adjustment screws.
Outlines
🔧 Introduction to Total Station Usage
The presenter introduces the Total Station device, recapping the previous unboxing session. They proceed to explain the steps to turn on the device and emphasize that, since the demonstration is on a table, no tripod setup is necessary. For field use, they suggest using a tripod and ensuring the device is properly balanced. The presenter demonstrates how to position the instrument for accurate readings, adjust the settings using the Escape button, and fine-tune the digital settings for maximum accuracy.
📋 Configuring and Setting up the Total Station
The presenter continues by detailing how to configure the Total Station. They navigate through the device's menu options to adjust observation conditions, including angles and atmospheric settings. The presenter emphasizes the importance of setting the device correctly for stable measurements, especially when using a tripod. The process of creating a 'job' in the device's data system is explained, allowing users to organize their work and save specific measurements for future reference.
🛠️ Measurement and Job Setup
This section explains the process of setting up and naming jobs within the Total Station system. The presenter shows how to input data, such as job selection, operator details, and coordinate settings. They also demonstrate how to configure the device for various types of measurements, including selecting the method for distance calculation and using local coordinates when official coordinates aren't available. Additionally, the importance of accurate instrument height measurement is discussed, especially when using a tripod.
📐 Starting the Measurement Process
The final paragraph describes the process of initiating topographical measurements using the Total Station. The presenter explains how to aim the device using a compass for directional accuracy and demonstrates setting angles and azimuths for precise readings. They also highlight how to input azimuth data and store it for future reference. Finally, the presenter reviews the different measurement options available, including angle, GIS data, and coordinate data, depending on the user's specific needs.
Mindmap
Keywords
💡Total Station
💡Tripod
💡Niveling
💡Cut Adjustment
💡Observation Mode
💡Vertical Distance
💡Atmospheric Correction
💡Coordinate System
💡Azimuth
💡Job Creation
Highlights
Introduction to the use of Total Station equipment and its key components.
Demonstration of how to power on the Total Station and key button placements, like the power button on the bottom right.
Explaining the importance of adjusting the tripod and leveling the device for accurate measurement.
Step-by-step guide on setting the device's X and Y axis for accurate measurements.
Instructions on how to configure the device to the most precise measurement possible, ideally under one second of error.
Emphasis on ensuring the tripod is stable for precise data collection.
Detailed setup of observation mode, including accessing menus for configuration and observational conditions.
Explanation of setting up the job configuration, including selecting or creating new jobs for each measurement session.
How to input or adjust coordinate systems based on existing job data or new measurements.
Tutorial on how to name jobs and input relevant data, such as using specific codes for job details.
Guide to start the actual topography measurement process, selecting options like offset or staking.
Inputting reference points or local coordinates when standing in place to take measurements.
Instruction on measuring the instrument’s height from the ground when using a tripod.
Using tools like a compass to align the device with the north for azimuth measurements.
Final steps in taking precise angle and coordinate measurements and saving data for download later.
Transcripts
halo halo anak teknik kita berjumpa lagi
setelah kita kemarin mengandung boxing
alat total station kali ini kita akan
membahas tentang bagaimana cara
penggunaan alat tersebut
[Musik]
ini dia di depan kita sudah ada alatnya
protection sesuai yang kita Unboxing
kemarin
yang pertama kita Nyalakan
alatnya terlebih dahulu nah di sisi
pojok kanan sini ada tombol power kita
tekan saja untuk menyalakannya
karena kita disini di atas meja Jadi
kita tidak perlu mengatur tripod ya
kalau menggunakan tripod terlebih dahulu
teman-teman untuk mengatur nipunya yang
ada di bagi ini terjadinya
teman-temannya kita putar terlebih
dahulu Kalau ada menggunakan tripod
teman-teman harus mengatur tripodnya
agar Vivo yang ada di sini ini berada di
pusat lingkarannya
kalaupun tidak ini nanti saya akan
mencoba mengaturnya di atas meja ini
pertama kalau belum muncul untuk
pengaturannya kita pencet tombol Escape
nah ini kita
muncul tampilan untuk mengatur cutnya
nah disini sudah digital ada x&y nya nih
saya putar dulu saya posisikan
sini
di sini kita setting agar untuk type
c-nya itu
seteliti mungkin nah disini disarankan
itu di bawah Satu detik lalu bisa jadi
jus dan untuk ketika menggunakan tripod
untuk
Hai itu tripodnya bener-bener berdiri
secara statik atau untuk bener kuat
tidak bergoyang
nah Sini
Sudah ketelitiannya sudah hampir
berakhir teliti tapi ini biar cepet aja
langsung saya oke ya Tapi ketika nanti
di lapangan teman-teman manggil data
diusahakan untuk
seakurat mungkin kalau bisa sampai satu
detik atau nol detik ini langsung kita
tekan yang menu Oke di F1
setelah selesai mensetting teman-teman
juga harus mensetting untuk alatnya
sendiri Nah untuk tadikan kemenuh
observasi langsung observasi untuk
Hai menu ke pengaturan konfigurasi
semen pencet Escape saja nanti akan ke
menu yang ada di sini ada observasi USB
USB untuk mendownload datanya Sedangkan
ini untuk pengaturan datanya atau
membuat job sedang ini untuk pengaturan
konfigurasi nya atau pengaturan alatnya
sendiri nah disini Saya akan mengatur
konfigurasinya terlebih dahulu tinggal
tekan F4
di sini banyak observasi condition
disini saya mengatur pegang observasi
kondisinya tinggal tekan enter nah
disini ada pilihan Angel this reflektor
atmosfer dan yang lain-lainnya misalkan
saya pilih yang ditinggalnya nah sini
Tinggal
teman-teman atur sesuai kebutuhannya ya
Escape saja
Kemudian untuk yang di stannya nah
disini ada beberapa
Hai menu yang harus diatur nah disini
untuk yang awal ketika alat ini
digunakan biasanya untuk mode dieselnya
itu untuk pengambilan datanya itu
menggunakan
vener Nah untuk penggunaan venerin nanti
ketika pengambilan data itu tidak
langsung
muncul datanya jadi nanti akan berubah
berubah untuk memastikannya agar
langsung ke repot atau
pasti datanya saya menggunakan pen
average Kemudian untuk this modenya di
sini ada vertikal distance Slug Justin
sama headstand nah saya menggunakannya
headstand kemudian temen juga bisa hadis
tanya Dari mana grounding atau great
sini saya menggunakan ground mungkin
yang lainnya saya baikan
ya baikan Hai
koordinatnya Seperti apa nsz atau enz
berserah sini saya nsz kemudian ketika
sudah langsung
skip saja ke
foundation atmosfer Saya abaikan ketika
sudah langsung di skep
Kemudian untuk membuat job-nya untuk
membuat joknya
tinggal pilih yang menu data pucat yang
f33 kemudian pilih Jobs kemudian enter
kemudian pilih job selection
disini
ketika ingin memilih joknya
temen-temen pilih dulu job selection
kemudian pilih list dengan di sini ada
beberapa job
sampai job
banyak ya bedanya tinggal teman-temanmu
yang mana misalkan disini Saya mau
menggunakan
job 1 ngantuk tandanya job yang sudah
digunakan itu yang ada tanda bintangnya
ya teman-temannya daunnya ketika sudah
tinggal tekan enter
kemudian koordinator joknya
ini bisa disamakan Bisa Beda ketika beda
itu ketika
data
pengukuran sebelumnya itu berkaitan
dengan pengukuran kita kali ini tetapi
disini saya menggunakan koordinat job
yang sama yaitu job satu
tinggal tekan enter Dah kalau sudah
tinggal Escape untuk mengubah
Hai
penamaan joknya temen-temen bisa melihat
pemilik job detail cepet l tinggal enter
nah atau mau mari name nama joknya
disini untuk pengaturannya misalkan saya
pengukuran coba gitu aja ya Coba tinggal
coba-coba
kemudian saya mau memilih yang
numerik untuk pemilihan mereknya untuk
mengubahnya tinggal tekan yang Shift
shift
ada huruf kecil kemudian ada mereknya
Disini yang akan terlihat perubahannya
tinggal coba satu
ketika sudah skillnya
mau diatur juga bisa teman-teman nah
cuman sayap menggunakan skillnya satu
banding satu ya telah saya selesai
penamaan joknya tekan oke
ke oke sudah tinggal Escape
kita akan melakukan pengukuran nah
Disini saya akan melakukan pengukuran
topografi ya misalkan topografi kita mau
mengukur lebar style koordinat
dinding itu ya dinding dari spandex
semoga
tinggal milih yang menu observasi atau
F1 kita klik F1
sini ada beberapa pilihan untuk
observasinya ada MLM offset toko Exo
disini saya untuk kali ini kita akan
menggunakan menutup untuk video-video
selanjutnya penggunaan-penggunaan
menu-menu MLM atau offset atau steking
hot nanti di video berikutnya itu kali
ini kita akan menggunakan menutup o-toko
Hai tekan F3 nah disini ada pilihannya
untuk
awal kita harus
memasukkan data tempat berdiri alat
sempat berdialog kita pilih yang menu
Opay atau untuk yang biasanya untuk di
seri-seri sebelumnya bisa menggunakan
kunci CVT nya disini menunya Popeye
tinggal kita menu enter start di sini
nsz nya
semisal temen-temen tempat berdiri
alatnya itu sudah ada koordinator bisa
dimaksudkan koordinatnya cuman disini
saya belum ada qarinah jadi saya
menggunakan koordinat lokal saya tulis
1000 1000dc hanya itu 100 penulisannya
tinggal pencet aja asalkan 1001
sudah kalau sudah tinggal bawah
tinggal dilanjutkan kemudian patok-patok
nya di sini saya berinama coba 1cd
transjek
bgv1
ini high instrumennya ketinggian
instrumennya berapa Nah ketika
teman-teman menggunakan tripod nanti
dari bawah tripod diukur menggunakan
meteran sampai ke
tanda ini tanda ini itu untuk nilainya
berapa dari Atok sampai ke alat hingga
alatnya
disini Saya tidak melakukan pengukuran
misalkan saja disini tingginya satu
meter atau 1 meter ya dari sini ke bawah
misalkan 1 meter hingga tuh atau 1,5
misalkan cuma 51.5
Kemudian untuk
Hai kodenya kodenya Seperti apa misalkan
kodenya itu saya samakan aja
cb1000cc
B13 sudah langsung aja
berikutnya yaitu ada operator
Operatornya siapa misalkan Budi sini
tinggal nulis Budi
dan Budi kalau sudah semuanya diatur
tinggal klik ok atau F4
untuk selanjutnya kita
masukkan baik set
mixed
eksenter di sini ada pilihan Angel atau
koordinat semisal basketnya atau acuan
teman-teman ada acuan koordinat nuskan
koordinat karena disini Belum ada saya
menggunakan Angle atau azimuth arah
utara enggak Tinggal ketik enter nah
disini
sisa rhr nya Sae 30 karena jemputnya kan
orang dari arah utara
06 Dian
kemudian arahnya kita Arahkan ke arah
utara Nah untuk menunjukkan arah
utaranya saya menggunakan bantuan copas
Kompas ya sini Kompas saya Arahkan
sini ya karena di sana Selatan ya
putar Jangan lupa untuk posisinya ya ini
untuk yang kita membidik disini untuk
yang lensanya jangan Hai kebalik
ya di sini ada bantuannya jemputnya
kalau bisa sampai presisi ke arah utara
atau arah
[Musik]
000 kan Anggap saja ini sudah
arah mendekati arah nol ketika sudah
mendekati arah nol
kunci
pemutar kasar horizontalnya hinggap
diputar kekanan agar arah utaranya tidak
berubah
dah
kemudian
tik Nani pilih
lebih tinggal F1
disini juga akan muncul
menu yang harus diinput dan Disini yang
perlu teman-teman sih akhirnya
nol karena kita mengacu pada Horizon
azimuth arah utara kemudian pt-nya jus
akan ini
batoknya itu
yang
unik ya di sini saya menamainya agar
nanti ketika mendownload data itu kita
tahu ini arah utaranya saya beri angka
9999
Kemudian untuk kodenya Saya isikan sulit
azimuth imut-imut
Hai untuk memasukkan ke datalis tinggal
pilih
ed1 untuk Ketika nanti teman-teman
mengukur ditempat lain tinggal menu
pilih di menulisnya misalkan list ya
sini saya tambahkan dulu
ad1re ini sudah keriput Ketika nanti
temen-temen pengukuran di tempat lain
tinggal pilih yang list dan disini ada
pilihannya
karena tadi sudah beli azimuth tinggal
enter aja azimuth azimuth ya karena tadi
sudah saya ketik kan terus azimuth sini
saya hapus aja
langsung oke tempat oke
Ini sudah siap untuk melakukan
pengukuran
teman-teman bisa ada beberapa pilihan ke
pengukurannya ada Angle data Gis data
koordinat data
descendant koordinat tinggal
sesuai dengan kebutuhannya tapi disini
Saya memilih untuk ya Dis + koordinat
atau jarak dan koordinat tinggal klik m
[Musik]
ini ini
[Musik]
Ver Más Videos Relacionados
Theodolite - Measuring Angles
Cara setting Router Mikrotik agar komputer Client bisa terkoneksi internet dengan DHCP SERVER
Installing and Configuring Logstash to Ingest Fortinet Syslogs
Cara setting benda kerja di mesin CNC milling mitsubishi M70
MENCARI KESALAHAN KONFIGURASI DASAR - MIKROTIK TUTORIAL [ENG SUB]
Day-2 | Cisco IOS on Real Devices | Memory Of Routers | Cisco Real Device Configuration #ccnp #cisco
5.0 / 5 (0 votes)