Working with the 3D paint

Summary

This tutorial demonstrates how to create a custom sticker using a 3D painter software. It guides the user through the process of capturing a screenshot, pasting it into the software, and then selecting and cropping the desired image. The user is then instructed to create a sticker, adjust its size and placement, and save the final product with a descriptive name. The video ensures the process is user-friendly, with an emphasis on clarity and ease of execution.

Takeaways

• 🎨 Use the 3D painter software to begin the process.
• 🔍 Ensure the software is enabled on your end before starting.
• 📍 Locate and use the symbol provided in the instructions.
• 🖼️ Take a screenshot of the desired image using the print screen button on your keyboard.
• 📋 Paste the screenshot into the 3D painter using Ctrl+V.
• ✂️ Cut out the selected part of the image within the painter.
• 🔖 Create a sticker from the selected image portion.
• 🖌️ Adjust the sticker on the drawing page, ensuring it fits within the designated area.
• 📐 Set the dimensions to 400 pixels by 400 pixels for the drawing area.
• 🗂️ Save the final image as a photo, giving it a descriptive name like 'hibiscus'.
• ♻️ After saving, you can close the current project and move on to the next without saving again.

Q & A

What software is mentioned in the transcript for creating a sticker?

The software mentioned in the transcript for creating a sticker is the '3D Painter'.

How does one transfer the image from the PDF to the 3D Painter?

You transfer the image by using the print screen function on your keyboard, then pasting it in the 3D Painter using Ctrl+V.

What is the purpose of using the 'cut' function in the 3D Painter?

The 'cut' function is used to remove the selected area of the image, allowing you to choose only the desired part of the photo.

How do you create a new sticker in the 3D Painter?

To create a new sticker, you select the chosen part of the image and then execute or confirm the action, which may be indicated by a button with text like 'done' or 'execute'.

What is the recommended size for creating a new sticker in the 3D Painter?

The recommended size for creating a new sticker is 400 pixels by 400 pixels.

What should you do if the photo is not fixed properly in the 3D Painter?

If the photo is not fixed properly, you should select all, delete the current selection, and then add the sticker again.

How do you adjust the position and size of the sticker in the 3D Painter?

You can move and adjust the sticker by clicking and dragging it to position it nicely within the lines of the 3D Painter's canvas.

What is the suggested naming convention for saving the created sticker in the 3D Painter?

The suggested naming convention is to save the sticker with a descriptive name, such as 'hibiscus', to easily identify the sticker later.

What should you do when prompted to save changes after closing the current project in the 3D Painter?

You can choose not to save the changes if you are moving on to the next project or if the current work is complete.

How can you ensure that the image is as large as possible within the sticker's canvas?

Ensure the image is as large as possible by adjusting its size and position within the canvas, making sure it fits well between the lines of the 3D Painter's canvas.

What is the final step mentioned in the transcript for completing the sticker creation process?

The final step mentioned is to save the sticker as a photo and then continue working on it or move on to the next project as needed.

Outlines

00:00

🎨 Using 3D Painter for Image Editing

The speaker begins by instructing the use of a 3D painter software, mentioning that it should be straightforward to find and use. They proceed to guide through the process of importing a PDF, selecting a viscous image, and using the print screen function to capture the image. The image is then pasted into the 3D painter, where it's cut and resized to fit a specific area. The speaker discusses creating a sticker from the image, ensuring it covers the entire photo and is saved under a specific name. The process concludes with saving the edited image and moving on to the next task without saving the current work.

Keywords

💡3D Painter

3D Painter refers to a software application used for creating and editing 3D models and textures. In the script, it is the primary tool mentioned for the task of creating a sticker. The video's theme revolves around using this software to manipulate images, as evidenced by the instruction to 'use the 3d painter' and the subsequent steps detailing its use.

💡Symbol

A symbol in this context is likely a reference to an icon or a specific element within the 3D Painter software that is necessary for the task. The script mentions 'this is the symbol, okay,' indicating it is a crucial part of the process, although the exact nature of the symbol is not specified.

💡Viscous

The term 'viscous' in the transcript seems to be a mispronunciation or typo for 'vicious' or another term. Without further context, it's challenging to define its role in the video. However, if we assume it's a descriptor for a layer or element within the 3D Painter, it could relate to the viscosity of a fluid in a 3D model, affecting how it behaves or appears.

💡Print Screen

Print Screen is a function on a computer keyboard that captures an image of what is currently displayed on the screen. In the video, it is used to take a screenshot of a PDF, which is then pasted into the 3D Painter, as indicated by 'click on print screen on your keyboard bring screen okay.'

💡Ctrl+V

Ctrl+V is a keyboard shortcut that stands for 'Control' and 'V' and is used to paste copied content into a document or software application. In the script, it is used to paste the screenshot taken with the Print Screen function into the 3D Painter, as shown in 'we're gonna click ctrl v to drop it here.'

💡Sticker

A sticker in this context refers to a digital image or graphic that can be applied to another surface or image within the 3D Painter software. The script describes creating a sticker from the pasted image, as seen in 'now we're going to go to this sticker, and going to create a sticker.'

💡400 Pixels by 400 Pixels

This phrase refers to the dimensions of an image or canvas in pixels. In the video, it is used to set the size of the canvas or the area where the sticker will be placed, ensuring that the sticker fits within a specific size, as mentioned in '400 pixels on 400 pixels.'

💡Select All

Select All is a command used in various software applications to highlight or select all elements within a given area. In the script, it is mentioned in the context of preparing the canvas for the sticker, where 'select all' is followed by 'click on delete' to clear any unwanted elements.

💡Save As

Save As is a command that allows users to save a file with a new name or format. In the video, it is used to save the final image as a photo, as indicated by 'menu, save as, photo,' and the example given is saving the file as 'hibiscus.'

💡Menu

Menu in software applications refers to a list of options or commands that can be accessed to perform various tasks. In the script, 'menu' is mentioned in the context of accessing the 'save as' function, suggesting it is part of the software's user interface.

Highlights

Introduction to using a 3D painter software.

Enabling the 3D painter software on the user's end.

Symbol identification within the software interface.

Instructions for locating the 3D painter software.

Closing the current window to proceed to the next step.

Moving to a PDF and placing a viscous element.

Using the print screen function on the keyboard.

Pasting the screenshot into the 3D painter using Ctrl+V.

Cutting and selecting the desired photo within the software.

Executing or finalizing the photo selection.

Navigating to the sticker creation feature.

Creating a new sticker from the selected photo.

Ensuring the photo is fully visible within the sticker boundaries.

Adjusting the sticker size to 400x400 pixels.

Deleting unwanted elements from the drawing page.

Adding the sticker to the drawing and adjusting its position.

Saving the work as a photo with a descriptive name.

Instructions for closing the software without saving changes.

Continuing to work on the project after saving.

Transcripts

okay so right so first of all you need

to uh use the 3d painter

okay

let's try and see it needs to be here

i don't know if it's gonna find it like

that but

it's enabled in my side my end

um

this is the symbol

okay

um

anyway if you cannot find the software

please let me know but it should be very

straightforward

now you have the software here

i'm going to close this window

and

let's go to the

pdf

now we'll take another place the viscous

one okay

and we're gonna move this

away so it won't affect the photo we're

gonna click on print screen on your

uh keyboard bring screen okay

now we're gonna go move on to the

painter we're gonna click ctrl v to

drop it here

now cut

cut and then we're going to just choose

the photo

right as we want

and

execute or done i don't know this button

here

now we have this thing

we're going to go to this sticker

and going to create a sticker

so

choose

we're going to

check everything like to click on the

mouse and not leave it until you're

going to find all the photo and then

make a sticker

one sticker is made we're gonna go to

the this button here making about the

drawing uh page

we're gonna make sure those are not

selected

400

pixels on 400 pixels

enter

now the photo is already fixed so we

don't need to use it but if it won't be

well we're gonna

click on choose

select all and click on delete

then come again to the stickers

add the sticker

then we can just move it and play with

that to have it very nicely

big photo as much as possible

in between of those lines then

menu

save as

photo

then we're gonna drop and say hibiscus

something like that i'm hoping that i'm

right yeah i'm right and save

now after that

you can continue working on that when

you're going to close on this button you

ask you want to save it you don't need

to save it

and you move on to the next one

okay