Cara Menggambar Gambar Potongan - Gambar Teknik
Summary
TLDRThis instructional video guides viewers through a detailed drawing process using basic tools like a ruler, compass, and protractor. It begins with setting up a central point and measuring the largest radius at 62mm, followed by subsequent measurements of 35mm and diameters of 44mm and 26mm. The tutorial then demonstrates how to create a 72° angle and draw circles with various radii, including a semi-circle with a radius of 18mm. The video emphasizes the use of a red marker for guidelines and a black marker for the final drawing, ensuring clarity and precision. The purpose of the drawing is to create a design that prevents an object from rotating within a mechanism, such as a CCTV holder, with a final measurement task of 29mm.
Takeaways
- 🎨 The video is a tutorial that encourages viewers to like, comment, and subscribe, highlighting that subscribing is free.
- 🛠️ It involves preparing tools such as a ruler, compass, protractor, and pencil for a drawing task.
- 📏 The first step is to draw a line and then determine the center point of the drawing.
- 🔍 Measurements are taken for various radii: 62mm, 35mm, and 26mm, indicating the importance of precision in the drawing process.
- 📐 The tutorial instructs to create a 72° angle and divide a circle accordingly, emphasizing geometric accuracy.
- 🖌️ The use of a red pen is specified for auxiliary lines and a black pen for the final drawing, indicating a methodical approach to the task.
- 🔵 The drawing includes specific measurements like a 1140mm diameter and a 505mm radius, showcasing detailed planning.
- 🔲 A semi-circle is drawn, and its radius is used to mark another point, indicating a step-by-step construction method.
- 🔗 The final drawing is clarified with a focus on a 62mm radius, suggesting a return to an earlier measurement for accuracy.
- ⚙️ The video concludes with a practical application of the drawing, mentioning a 'V' groove for holding a part in place without rotation, possibly for a machine or CCTV setup.
Q & A
What are the materials needed to start the project described in the script?
-The materials needed include a ruler, a compass, a protractor, and a pencil.
What is the first step mentioned in the script for the project?
-The first step is to draw a line using the ruler.
What is the significance of the center point in the project?
-The center point is used to measure the radius and to draw circles and arcs.
What is the largest radius measured in the script?
-The largest radius measured is 62mm.
What is the diameter mentioned in the script, and what is its corresponding radius?
-The diameter mentioned is 44mm, which corresponds to a radius of 22mm.
What is the angle used to divide the circle in the project?
-The angle used to divide the circle is 72°.
What is the purpose of drawing the lines with a 72° angle as described in the script?
-The lines with a 72° angle are used to create specific angles and divisions on the drawing.
What is the significance of the 18mm radius mentioned in the script?
-The 18mm radius is used to draw a smaller circle or arc as part of the project's design.
What does the script suggest marking with the same distance as the half-circle previously drawn?
-The script suggests marking with the same distance as the half-circle to ensure consistency in the design.
What is the purpose of the 29mm measurement mentioned in the script?
-The 29mm measurement is used to determine the distance for a specific part of the project, possibly related to the placement of a component.
What is the final step described in the script for completing the project?
-The final step is to clarify the lines and ensure that the drawing is complete and accurate.
Outlines
📏 Geometry Drawing Tutorial
This paragraph introduces a tutorial on how to draw geometric shapes using tools like a ruler, compass, and protractor. The process starts by drawing a central line and then marking the center point. Subsequent steps include measuring and drawing radii of different sizes, such as 62mm and 35mm, and then drawing circles with diameters of 44mm and 26mm. The tutorial also involves creating angles, specifically a 72° angle, and using it to divide a circle. The process is detailed, with instructions on how to draw lines and circles to form a specific geometric design.
🎨 Finalizing the Geometric Design
In this paragraph, the tutorial concludes with the final touches on the geometric design. The speaker emphasizes marking a point with the same radius as a previously drawn semi-circle. The process includes drawing lines to connect various points and clarifying the purpose of different lines in the design. The tutorial uses red and black spray paint to differentiate between guide lines and the actual drawing. The red lines are for guidance, while the black lines represent the final image. The tutorial also mentions the importance of certain measurements, such as a 29mm distance, for specific mechanical applications, like preventing an object from rotating within a machine or CCTV camera housing. The paragraph ends with a note on the practical application of the geometric design.
Mindmap
Keywords
💡Spidol
💡Vena
💡Busur
💡Penggaris
💡Mistar
💡Diameter
💡Radius
💡Lingkaran
💡Titik tengah
💡Sudut
💡Garis
Highlights
Introduction to the video with a reminder to like, comment, and subscribe.
Preparation of tools such as a ruler, compass, protractor, and pencil.
Beginning with drawing a straight line.
Determining the center point for the drawing.
Measuring the largest radius to be 62mm.
Second measurement is 35mm.
Next, determining the diameter to be 44mm or radius 22mm.
Following that, a diameter of 26mm or radius 13mm is measured.
Creating an angle of 72° for the circle.
Drawing a line at a 72° angle on the other side.
Obtaining several lines with a 72° angle.
Drawing a diameter of 36mm or radius 18mm.
Marking a point with the same distance as the half-circle previously drawn.
Drawing a line to connect the marked points.
Clarifying the lines with a 62mm radius from the center.
Using red and black spray paint to differentiate between guide lines and the actual drawing.
Finalizing the drawing with measurements and ensuring accuracy.
Explanation of the purpose of the drawing, which is for a machine part to prevent rotation within a bore.
Final measurement of the drawing with a length of 77mm.
Transcripts
hai oke teman-teman sebelum melanjutkan
video ini jangan lupa like komen dan
subscribe karena subscribe itu gratis
cucumu udah ada pertama-tama kita
siapkan dulu peralatannya seperti jangka
Hai kemudian mitos spidol Vena busur dan
penggaris atau mistar
hai oke langkah pertama kita buat garis
partai call kemudian kita Tentukan titik
tengah atau titik pusat Setelah itu kita
ukur jari-jari terbesar itu 6262 mm
Terus yang kedua yaitu 35 Terus yang
ketika itu
Hai selanjutnya yaitu diameter 44 atau
radius 22 Terus yang selanjutnya lagi
itu diameter 26 atau radius
I have sekarang kita membuat
di sudut 72° jadi lingkaran itu kita
bagi dengan jaraknya 72° Oke kita garis
dulu Jack terbuat
Engkong dan kita ukur lagi 72° yang
sebelah sini oke titik yang selanjutnya
kemudian kita garis lagi Oke didapat
situ beberapa garis dengan besar sudut
72 sekarang kita menggambar yang
diameter
E36 atau radius
Hai sesuai di soal ya dengan segala satu
banding satu ini juga radius 18 sini
juga
Hai di sini aku
website lagi disini
Hai sekarang kita buat Dian demeter 1140
pc123 Maaf ya
hai hai
Hai dan 5C terus kita buat yang radius
505s kita buat setengah lingkaran hehehe
udah selesai Sekarang kita Tandai di
titik ini dengan jarak sama besar dengan
lingkaran yang kita buat setengah tadi
dengan radius atau jari-jari
Hai sekarang kita garis ke
hai hai
the lounge
Paul
hai oke selesai Sekarang kita perjelas
garis yang gadis 62 jari-jari 62 dari m
teh kok mungkin jelas Kamar kerjanya
wpa2 video ini sengaja saya menggunakan
spidol warna merah itu adalah garis
bantu dan spidol yang warna hitam itu
adalah gambar jadinya the gambar
potongan yang seharusnya
Hai saya gambarnya hampir selesai
kemudian tinggal kita ukur itu ada jarak
29 tugasnya kalau di benda mesin ini
adalah tempat sepi ya Vi atau penahan
supaya suatu benda itu tidak berputar
ikut berputar di porosnya CCTV jelas
yaitu dengan panjangnya y77 MM
Посмотреть больше похожих видео
5.0 / 5 (0 votes)