Easy Two-Tone Paracord Bracelet Tutorial

Summary

This tutorial offers a straightforward guide to crafting a two-color paracord bracelet. It utilizes Navy and white cords, requiring approximately 10 feet of cord in total. The process begins with melting the ends and threading them through a 58-inch clip from CDW plus.com. The tutorial emphasizes the importance of measuring wrist size accurately for a comfortable fit. The weaving technique involves crossing the desired middle color first, followed by a series of over and under maneuvers to create a pattern. The video also touches on how to reverse the colors for a different look and concludes with tips for finishing the bracelet ends with a lighter for a clean appearance.

Takeaways

• 😀 This tutorial teaches how to make a paracord bracelet using two colors, navy and white.
• 🛠️ The recommended tool for the project is a 58-inch clip from CDW plus.com and cord from campingsurvival.com.
• 📏 It's suggested to use about 10 feet of cord, combining a 5-foot piece of navy and a 5-foot piece of white.
• 🔥 The ends of the cords are melted and then pushed together to create a single 10-foot length.
• 🔗 The cord is threaded through the clip, with the melted ends flattened for easier passage.
• 📏 Measuring the wrist size is identified as the trickiest part of the process when making the bracelet alone.
• 🌈 The color choice for the middle of the bracelet determines which color strand is crossed over first in the weaving process.
• 🔗 Weaving involves crossing one color over the other, then feeding the second color around the bracelet and through the loop created by the first color.
• 🔍 It's emphasized to pull tight on each weave to ensure a clean and neat final appearance.
• ⏩ The tutorial suggests practicing the weave to improve speed and efficiency in making paracord bracelets.
• 🔧 The final steps include clipping the tag ends and using a lighter to finish off the ends for a clean look, with a caution about the heat of melting nylon.

Q & A

What is the tutorial about?

The tutorial is about making a paracord bracelet with two colors.

What are the two colors of paracord used in the tutorial?

The two colors of paracord used are Navy and White.

Where does the clip used in the tutorial come from?

The clip used in the tutorial comes from CDW plus.com or Creative Design Works.

What is the length of the clip used for the bracelet?

The clip used for the bracelet is 58 inches long.

Where does the paracord used in the tutorial come from?

The paracord used in the tutorial comes from campingsurvival.com.

How much paracord is recommended to use for the bracelet?

It is recommended to use about 10 feet of paracord for the bracelet.

What is the first step in making the bracelet according to the tutorial?

The first step is to melt the ends of a 5-foot piece of Navy and a 5-foot piece of White paracord, push them together to create a 10-foot length.

How does one make the loop at the beginning of the bracelet?

To make the loop, feed the two ends through the top of the clip, pull the excess through, and then pull the two tag ends back up and through the loop created.

Why is it suggested to flatten the melted ends of the paracord?

Flattening the melted ends makes it easier for the paracord to pass through the clip.

How does one measure the wrist size for the bracelet?

To measure the wrist size, clip the ends together, tighten slightly, and ensure there is some wiggle room so it's not too tight.

Which color is used in the middle of the bracelet in the tutorial?

In the tutorial, Navy is used in the middle of the bracelet.

What is the technique for starting the weave on the bracelet?

To start the weave, cross the color that will be in the middle (Navy in this case) over the other color (White), bring the other color (White) down over the first, and then feed it around the bracelet and up through the loop created with the first color (Navy), pulling it tight.

How does the tutorial suggest ensuring a clean look for the bracelet?

The tutorial suggests pulling tight on each weave to ensure a clean look for the bracelet.

What is the cool feature of the two-tone weave mentioned in the tutorial?

The cool feature of the two-tone weave is that it can be reversed, so if you were using a flat clip or no clip, you could have the other color in the middle instead.

How does one finish off the ends of the paracord after weaving the bracelet?

After weaving, clip the tag ends and use a lighter to melt and finish off the ends for a clean look.

What precaution is mentioned regarding the use of a lighter to finish the paracord ends?

The precaution mentioned is that the nylon paracord can get very hot when it melts, and it can stick to fingers, so care should be taken not to hold the lighter on it for too long.