Cara Konfigurasi VoIP Pada Cisco Packet Tracer Terbaru || Command Line Interface CLI
Summary
TLDRThis video script offers a step-by-step guide on configuring VoIP with Packet Tracer. It begins with setting up the necessary hardware, including routers and switches, and progresses to the configuration of the switch and router interfaces. The tutorial covers IP address assignment, DHCP setup, and voice service configuration. It concludes with a test, demonstrating the successful connection between iPhones, showcasing the practical application of the VoIP setup.
Takeaways
- 😀 The video is a tutorial on configuring VoIP with Packet Tracer.
- 🔧 The tutorial uses a Router 28-11 and a Switch 29-5024 for VoIP setup.
- 📞 Three iPhones are used for demonstrating the connection and configuration process.
- 💻 The script details the step-by-step process of configuring switches and routers for VoIP.
- 🌐 It explains how to connect the devices using cables and configure them to establish a connection.
- 📝 The video provides commands for entering the configuration mode and setting up interfaces on the switch.
- 🔢 It guides through setting IP addresses on the router and configuring DHCP for the iPhones.
- 't📞 The script includes instructions for setting up voice services and assigning phone numbers to the iPhones.
- 't📲 The tutorial covers how to test the VoIP setup by making calls between the iPhones.
- 🔄 The video emphasizes the importance of saving the configuration to retain the settings.
- 👍 The presenter encourages viewers to like the video if they find it useful.
Q & A
What is the main topic of the video script?
-The main topic of the video script is configuring VoIP with Packet Tracer.
Which router model is mentioned in the script for VoIP configuration?
-The router model mentioned for VoIP configuration is 28 11.
What type of switch is used in the script for VoIP configuration?
-The switch type used in the script is a 29 5024 POT switch.
How many iPhones are used in the configuration process described in the script?
-Three iPhones are used in the configuration process.
What command is used to enter the enable mode on the switch?
-The command used to enter the enable mode on the switch is 'enable'.
What interface is configured on the switch in the script?
-The interface configured on the switch in the script is FastEthernet or Fa0/1.
What is the IP address assigned to the router's Internet interface in the script?
-The IP address assigned to the router's Internet interface is 192.168.1.1 with a subnet mask of 255.255.255.0.
How is the DHCP service configured for the iPhones in the script?
-The DHCP service is configured by setting the IP address, subnet mask, default gateway, and exclusive address for the iPhones.
What is the purpose of configuring the 'telephone service' in the script?
-The purpose of configuring the 'telephone service' is to enable the handling of calls for the connected devices, such as iPhones.
What is the maximum number of iPhones supported in the configuration mentioned in the script?
-The configuration mentioned in the script supports a maximum of 600 iPhones.
How are the phone numbers assigned to the iPhones in the script?
-The phone numbers are assigned by configuring the 'dn' (directory number) with specific values like dn1, dn2, and dn3 with corresponding phone numbers.
What is the final step mentioned in the script for saving the configuration?
-The final step mentioned for saving the configuration is to type 'write memory' or 'wr' to save the changes.
How is the connectivity between iPhones tested in the script?
-The connectivity between iPhones is tested by making calls from one iPhone to another using the assigned phone numbers.
Outlines
😀 VoIP Configuration with Packet Tracer
This paragraph introduces the video's subject, which is configuring VoIP using Packet Tracer. The speaker, Selva, outlines the necessary equipment including routers and switches, and begins the process of connecting them using cables. The focus is on setting up the VoIP facilities on a specific router model and configuring a switch, with a brief mention of using an iPhone for testing the setup. The speaker guides through entering configuration mode on the switch and router, assigning IP addresses, and setting up DHCP for the devices involved.
📞 Advanced VoIP Setup and Testing
The second paragraph delves deeper into the VoIP configuration process, focusing on advanced settings and testing. It starts with setting up DHCP on the router, including exclusive addresses for specific devices. The speaker then configures telephony services, including the number of devices that can be supported and the maximum number of concurrent calls. Each iPhone is assigned a unique phone number and additional settings are adjusted for optimal performance. The paragraph concludes with a practical demonstration of making calls between the iPhones to verify the setup's success, encouraging viewers to like the video if they found it helpful.
Mindmap
Keywords
💡VoIP
💡Packet Tracer
💡Router
💡Switch
💡Interface
💡IP Address
💡DHCP
💡Gateway
💡Configuration
💡Telephone
💡Connectivity
Highlights
Introduction to configuring VoIP with Packet Tracer.
Using a specific router model for VoIP facilities.
Setting up a switch with a specific type for network connectivity.
Connecting iPhones using Ethernet cables for the configuration.
Accessing the switch configuration through the command line interface.
Configuring the switchport for VoIP with specific commands.
Entering the router configuration mode for further setup.
Assigning an IP address to the router's internet interface.
Mistake correction in assigning the IP address and subnet mask.
Setting up DHCP on the router for dynamic IP allocation.
Configuring network settings on iPhones manually.
Assigning a static IP address and subnet mask to iPhones.
Setting the default gateway for the iPhones' network configuration.
Configuring optional settings for recording IP addresses on iPhones.
Enabling telephony services and setting up the maximum number of devices.
Assigning IP source addresses for the telephony service.
Setting up phone numbers for individual iPhones.
Saving the configuration and verifying the setup on iPhones.
Testing the VoIP setup by making calls between iPhones.
Conclusion and call to action for feedback on the video.
Transcripts
Oke assalamualaikum warahmatullah
wabarokatuh berjumpa lagi dengan Selva
tersedia tol Pada kesempatan kali ini
saya akan berbagi atau sharing Bagaimana
cara konfigurasi VoIP dengan Packet
Tracer B caranya
0838 hubungi 0 8 12 yang ada di sini ke
kripke Oke seperti itu simak videonya
sampai dengan selesai
[Musik]
adapun yang kita siapkan yang pertama
adalah router-router disini kita
menggunakan yang 28 11 nya router ini
yang bisa untuk fasilitas VoIP yang
ketipu adalah switch switch tipe 29
5024 pot
selanjutnya
baik iPhone sebanyak tiga
selanjutnya saya akan hubungkan kabel
dengan menggunakan kabel Strike
Desa akan konfigurasi agar in tersambung
hijau
kisarannya klik kita sambungkan kabel
iPhone pakai bonnya kalau silang
selanjutnya kita akan konfigurasi untuk
switch dan router yang pertama adalah
sweet terlebih dahulu kita ke jelly
lalu kita enter di sini kita ketikkan
perintah enable
Woodland app selanjutnya konfigurasi
Terminal
selanjutnya interface in the
ring
fast ethernet atau Eva saja
01 sampai dengan rukun Pak
[Musik]
selanjutnya kita ketikkan sweet
sweet pot jika kita lupa kita bisa
menekan tombol tab switchport lalu
disini voice
291 enter selanjutnya exit atau eek
secukupnya nah ini saja yang kita
konfigurasi pada sweetnya lalu
selanjutnya konfigurasi pada router
kita ke celi disini kita Klik di bagian
[Musik]
melanjutkan konfigurasi kita jawab en
atau no enter enter sekali lagi lalu
kemudian enable atau enak selanjutnya
konfigurasi Terminal
Selanjutnya lagi kita pasang IP address
cara memasang IP address pada rute yaitu
inilah video yang sudah pernah saya
upload sebelumnya Nanti linknya ada di
deskripsi
internet interface
Eva
00 enter selanjutnya kita pasang atau
sebelumnya kita ketikan noh lebih dahulu
lalu Fitra ketikan IP address
192 168 1 1 M
eh salah IP address
192 168 1 1
spasi 255 255 255 6
selanjutnya setelah kita memberi IP
address kita akan exit
tokek selanjutnya setelah kita
memberikan HIV test kita akan memberikan
IP DHCP pada
ketiga
iPhone voicenya iPhone caranya itu
hai lalu DHCP full
Boys
lalu selanjutnya kita pasang Network
[Musik]
19216810
spasi 255 255 250 m
selanjutnya kita akan pasang Gateway
dengan cara mengetikkan defaul
defaults kita tekan tak default router
19216811
selanjutnya setelah kita memberikan
Gateway kita akan pasang opsional ini
perekaman pada ip yang akan kita pasang
pada iPhone
19216811
selanjutnya kita akan ketikkan exit
setelah ini kita akan pasang IP DHCP ya
Mrs CV
lalu kita ketikkan eksklusif kalau kita
lupa kita bisa menekan tab
eksklusif address
selanjutnya
192168 selangit
o.fb
Steele
[Musik]
cpx24 address
[Musik]
19216811
selanjutnya disini kita akan memberikan
servis pada telepon idd telephone
caranya itu kita ketikkan
telepon
service termasuk ke foldernya dulu enter
lalu kita akan berikan maksimal untuk
iphonenya ke perangkatnya iPhone tuh
sebanyak tiket lalu kita akan beri
dimaksimalkan Untuk 600 iPhone tersebut
kita akan berikan tiga juga lalu
ketikkan IP soal 1 IP sumber address the
Lukita pasang
19216811 kita pasang atau melalui jalur
pot
2006
auto sign
satu tuh tiket selanjutnya xxdx saja
selanjutnya kita akan pasang IP atau
penomoran pada
iPhone masing-masing nomor telepon pada
masing-masing iPhone
minden spasi 1 dan disini kita akan
PasangNomor sangat number 08 11
selanjutnya kita pasang iPhone
dn2 kita pasang hambarnya adalah 08 12
selanjutnya kita akan pasang iPhone dn3
kita akan beri name
0 0 8 13
Hai macam Oke seperti itu lalu kita
exsense
exit dan lupa kita simpan penyimpanan
dengan ketikan Wright enter
oke kita lihat configuration kita sudah
buat selanjutnya adalah kita masuk ke
iPhone
ingini
bahkan kekui
lalu kita akan SMP sampai selanjutnya
yang iPhone ini kita masih perlu yg lalu
kita gsx-s jenis lalu yang ketiga adalah
ikon ketika
reservations eh dekatnya status ini
Nikita menembus jadi F1 F2 F3 kita akan
coba untuk menghubungi iPhone satu sama
lainnya langsung
Hai
uppppp laptop solselkab kamu telepon
diri sendiri
maka kita akan menelepon 08 12 yang ini
Ini adalah 08 13 jadi kita akan
menelepon 08 12 dan 08 13 Oke caranya 08
12
kulit ini adalah ini kita angkat Mekkah
connect dan connect tertutup salah satu
maka piston Oke kita akan telepon 08 13
08 13
proyek kan Dapat telepon dari 08 11 kita
angkat maka connect connect Saya rasa
cukup mudah dan video ini bermanfaat
klik like jika suka dengan video ini
seri wassalamu'alaikum warahmatullahi
wabarakatuh
Hai sahabat semua
[Musik]
Weitere ähnliche Videos ansehen
CARA KONFIGURASI MIKROTIK AWAL (KONEKSI INTERNET)
Enrutamiento estatico (3 router) Packet Tracer
Cara setting Router Mikrotik agar komputer Client bisa terkoneksi internet dengan DHCP SERVER
Free CCNA | Configuring Interfaces | Day 9 Lab | CCNA 200-301 Complete Course
How to create wifi hotspot on linux
Konfigurasi DHCP Server dan DHCP Client pada Router Mikrotik RB 951Ui-2HnD
5.0 / 5 (0 votes)