Smart Glove for Dumb and Deaf People with Home Automation Project | using Arduino and Flex Sensor
Summary
TLDRThe script introduces a Hungarian project named 'Smart Glove for Dumb and Deaf People' that incorporates automation and text-to-speech conversion. It features a mode selection for the speaker, sensors for hand gestures, and components like an LCD and a playback module for on-the-spot recording and playback. The system can be wireless and includes a voltage divider circuit for a flux sensor and a relay for a 220-volt bulb. The script also mentions a microcontroller with embedded code to control the system, highlighting the project's innovative approach to assistive technology.
Takeaways
- 😀 The project is named 'Smart Glove for Dumb and Deaf People', aiming to assist communication through text and speech conversion.
- 🔧 The project includes an automation mode that can be switched on and off using finger gestures, enhancing ease of use.
- 📝 The script mentions a 'speaker mode' where the device can produce sound, and a 'hospital' mode which might be a specific setting for medical environments.
- 👂 The device can convert text to speech, which is a key feature for helping the deaf and mute communicate.
- 🔌 The system can be made wireless, indicating that it can operate without being connected to a power source or other devices via wires.
- 🛠️ Components used in the project include an LCD, an ID1820 module for playback, and a microcontroller for managing the device's functions.
- 🔊 The device has a feature for recording and playing back messages on the spot, which could be useful for personalized communication.
- 🔡 The script describes a method for displaying text on the LCD, allowing users to read messages or instructions.
- 🔄 The project uses a voltage divider circuit for the flex sensor, indicating attention to detail in the design for accurate sensing.
- 💡 The device includes a relay for controlling an electric fan or possibly other devices, showing its capability to interface with external systems.
- 🔄 The script mentions a mode selection button, suggesting that users can switch between different operational modes of the device.
Q & A
What is the name of the project mentioned in the script?
-The name of the project is 'Smart Glove for DOM and DPP People'.
What features does the Smart Glove project aim to incorporate?
-The Smart Glove project aims to incorporate features like automation and gesture recognition to convert text and speech.
How does the user interact with the Smart Glove project?
-The user interacts with the Smart Glove project by writing text on a surface and producing sound through a speaker.
What is the first mode of operation mentioned for the Smart Glove speaker?
-The first mode of operation for the Smart Glove speaker is 'Speaker Mode' where the speaker is set to 'Hungry I am not feeling well please take me to the hospital'.
What is the automation mode in the Smart Glove project?
-The automation mode in the Smart Glove project is where the project shifts to an automated mode, and the fan and other components are expected to work accordingly.
How can the Smart Glove system be made wireless?
-The system can be made wireless by ensuring that the automation components are integrated wirelessly.
What components are used in the Smart Glove project?
-Components used in the Smart Glove project include an LCD, an ID1820 module for playback, a flux sensor, a voltage divider circuit, and a microcontroller.
What is the purpose of the flux sensor in the Smart Glove project?
-The flux sensor is used to detect variations in voltage and is connected with a 10-kiloohm resistor to provide voltage readings for microcontroller control.
How can the user control the Smart Glove's fan?
-The user can control the Smart Glove's fan by using the finger sensors to turn the fan on and off.
What is the purpose of the relay in the Smart Glove project?
-The relay in the Smart Glove project is used to control the connection of the 220-volt bulb.
What is the role of the microcontroller in the Smart Glove project?
-The microcontroller is used to manage the overall functionality of the Smart Glove, including the automation and control of various components.
Outlines
🍽️ Hunger and Smart Glove Automation
The video starts with a person expressing hunger and requesting food, followed by a brief mention of feeling unwell. The focus then shifts to a project called 'Smart Glove for Dumb and Deaf People.' This project integrates automation and gesture recognition to convert sign language into text and speech. The speaker demonstrates how the glove, through different modes, can translate gestures into specific phrases such as 'I am feeling hungry' or 'Please take me to the hospital.' Additionally, the glove can control devices like fans and bulbs, which are automated through relay modules.
🛠️ Components and Circuit Design
This paragraph provides a detailed explanation of the components used in the Smart Glove project. It mentions the use of relay modules, an LCD screen for displaying text, an ID 1820 module for playback, and a microcontroller for coding and automation. The description includes how the circuit is designed with a voltage divider for flux sensors and a relay system to control appliances like fans and bulbs. The microcontroller is programmed to detect voltage variations and perform tasks based on the input from the sensors.
👩💻 Programming and Mode Selection
The speaker explains how the microcontroller is coded to handle different modes of operation, including a speaker mode and an automation mode. The paragraph details the programming logic that allows the system to perform specific tasks, such as displaying messages on an LCD or converting gestures into spoken words. The programming also includes the ability to control the automation of appliances, with modes set to trigger specific actions like turning on a fan or a bulb.
🌐 Introduction to Z Technology and Services
The final paragraph introduces the organization behind the project, Z Technology, based in New Delhi, India. The company specializes in developing research-based software and hardware projects globally. It offers a wide range of services, including engineering projects, thesis guidance, ready-made kits, and patent-related services. The paragraph ends with a call to action, encouraging viewers to join their channel for more details and check the description for further information.
Mindmap
Keywords
💡Automation
💡Project Smart Glove
💡LED
💡Microcontroller
💡Sensor
💡Relay
💡Voltage Divider
💡Record and Playback Module
💡Wireless
💡Technology
💡Tecknal New Delhi India
Highlights
Introduction of a project named 'Smart Glove for Dumb and Deaf People'.
The glove features automation and conversion between text and speech.
The project aims to assist in communication for individuals with speech and hearing impairments.
The glove can convert text to speech, aiding in the production of sound from a speaker.
Mention of a mode selection feature for the smart glove.
Integration of a sensor for detecting hand gestures.
The glove can be switched to an automation mode for various functions.
Components used include LEDs, an ID module, and a playback module.
The system can record and play back messages on the spot.
The glove is designed to be wireless for ease of use.
Technical details on the use of a relay model and voltage divider circuit.
Inclusion of a flex sensor for gesture recognition.
The project is developed by Technal New Delhi, India, focusing on software and hardware projects.
Technal provides a large collection of projects on their website.
Services offered include unique engineering projects, science projects, and thesis guidance.
The company also provides patent-related services for technological innovations.
Invitation to join their channel for more details and to upgrade knowledge.
Closing remarks with an invitation to check the description for more information.
Transcripts
[संगीत]
हे आई एम हंगरी गिव समथिंग टू
ईट आई एम नॉट फीलिंग वेल प्लीज टेक टू
[संगीत]
बन प्रोजेक्ट है जिसका नाम है स्मार्ट
ग्लव फॉर डम एंड ड पीपल और इसम हमने फीचर
डाल रखा है ऑटोमेशन का और गेर का गेर से
हम टेक्स्ट में और स्पीच में कन्वर्ट कर
रहे हैं तो टेक्स्ट यहां पर लिख के आएगा
और स्पीकर से यहां पर साउंड प्रोड्यूस
होगा ओके तो हम सबसे पहले इसमें मोड मैंने
डाल रखे है मोड नंबर वन हमारा यह स्पीकर
तो स्पीकर
चलाइए इस स्पीकर सॉरी हा स्पीकर मोड पर
डालते पहले ओके सो ग्लव मूव करिए फिंगर्स
को फल सेंसर को आई एम फीलिंग हंग्री गव
समथिंग टू ईट ओके नेक्स्ट वन
आईम नॉट फंग वेल प्लीज टेक टू हॉस्पिटल
ओके
नेक्स्ट प्ली टू थैंक
यू हाउ आर यू आ य
फाइन ओके नाउ नेक्स्ट मोड इ ऑटोमेशन मोड
प्रोजेक्ट विल ब शिफ टू ऑटोमेशन मोड और
उसके अंदर हमारा ब और ये फैन वर्क करना
चाहिए तो पॉइंट नंबर वन से यह हमारा फैन
ऑन हो जाएगा फिंगर नंबर टू से फिंगर नंबर
टू से ले ऑफ हो जानी चाहिए सेम तरीके से
एक बल्ब लगा रखा है बल्ब न ऑफ हो
जाएगा ओके और इस सिस्टम को हम वायरलेस भी
कर सकते कि ये चीज ऑटोमेशन की वायरलेस में
आ जाए ओके और हमने कंपोनेंट क्या यूज किए
हुए जैसे कि रिल मॉडल यूज किए हुए अभी
इनिशियली मैंने दो यूज कर रखे है और भी
यूज मेंला सकते हैं एलसीडी जिस पर कि
क्लिक के आ रहा है जो भी काम हो रहा है और
और यहां पे हमारे आईडी 1820 मॉड्यूल है
प्लेबैक मॉड्यूस और इसमें रिकॉर्ड कर सकते
हो ऑन द स्पॉट और प्ले भी कर सकते हैं
जस्ट लाइक
टूथ 1 2 3 4 5 6 7 8 1 2 3 4 5 6 7 8 ओके
एंड यहां पे हमारा ड्राइवर है ये ये हमारे
फ्लक्स सेंसर के लिए वोल्टेज डिवाइडर
सर्किट मैंने रेडी किया हुआ है ये फ्लक्स
सेंसर लगेगा 10 कोलोम का रेजिस्टेंस लगा
दे ताकि हमारे पास जो वोल्टेज का वेरिएशन
आए माइक्रो कंट्रोल सेंस कर ले और हमारे
पास ये एलसीडी है जहां पे हम लिख के दिखा
सकते हैं चीजों को ये मोड सिलेक्शन का बटन
है ये वॉइस मड हमारे है और यह हमारा एक
फैन है और एक रिले के थू यहां पर हमने एक
बल्ब लगा र है 220 वोल्ट का ओके और य आन
माइक्रोकंट्रोलर यूज किया हुआ है इसके
अंदर कोड किया हुआ है ताकि ये सारी चीज आ
और ये हमारा एक कोड
है ओके ल ये सब डिफाइन कर दिया है फिर पिन
के मोड डिफाइन कर दी है पिन आउटपुट के लिए
सेट किया है और रिले को भी आट सेट के इली
लो रखा है सॉरी इली हाई रखा है और जो
हमारे व मडल इनको लो रखा है और फिर स्पीकर
का मोड सलेक्शन करा य पर अगर बटन दबा हुआ
है तो फिर हंग्री आई एम हंग्री आम न
फीलिंग वेल य सब चीज लिखवा दि और ऑडियो
में भी उसको आप चेंज कर सकते हो जा सकते
हो जैसा चाहते हो सेम तरीके से हमारा हाउ
आर यू य सब चीज आ जाएगी लास्ट वाला जो है
उसके बाद म का है म ऑटोमेशन नंबर ठीक है
इस
[संगीत]
हेलो एवरीवन वी आर फ्रॉम टेक्नल न्यू
दिल्ली इंडिया वी डेवलप रिसर्च बेस
सॉफ्टवेर एंड हार्डवेयर प्रोजेक्ट्स एंड
प्रोडक्ट ग्लोबली z टेक्नोलॉजी हैज द
लार्जेस्ट कलेक्शन ऑफ प्रोजेक्ट्स ऑन आवर
वेबसाइट यू कैन गेट सर्विसेस लाइक यूनिक
इंजीनियरिंग प्रोजेक्ट साइंस प्रोजेक्ट
एमटेक पीएचडी थीसिस गाइडेंस सेल्फ लर्निंग
किट्स रेडीमेड प्रोजेक्ट्स हार्डवेयर
कंपोनेंट ड्रोन रिलेटेड सर्विसेस
सॉफ्टवेयर एंड सिमुलेशन रिसर्च पेपर
राइटिंग एंड पब्लिकेशन इन टॉप जर्नल्स एंड
कॉन्फ्रेंसेस वी आल्सो प्रोवाइड पेटेंट
रिलेटेड सर्विसेस सो टू अपग्रेड योर नॉलेज
यू कैन जॉइन आवर चैनल फॉर मोर डिटेल्स
प्लीज चेक डिस्क्रिप्शन थैंक यू गाइ हैव अ
नाइस
[संगीत]
डे
浏览更多相关视频
New Blynk IOT Smart Plant Monitoring System
Automatic Plant Watering System using Arduino & Soil Moisture Sensor | LCD display [with CODE]
8 SECRET EXAM CHEATING GADGETS FOR STUDENTS | Gadgets under Rs100, Rs200 and Rs1000
VERY EASY Arduino IR Sensor Tutorial for Beginners | IR Sensor Arduino Tutorial | Infrared Sensor
04 - GuardLink Components
How to prepare RL series circuit in Multisim | RL Series Circuit Multisim | Mruduraj
5.0 / 5 (0 votes)