CARA MENCARI SINYAL KVISION PARABOLA KECIL DI SATELIT TERBARU MEASAT 3B

Summary

This tutorial video provides a step-by-step guide on how to find the latest signal frequencies from the Miasat 3B satellite, particularly for users with Capision or similar satellite receivers. It covers how to reset your dish's alignment and properly set up the LNB for optimal signal reception. Viewers are shown how to adjust the satellite dish to achieve the best signal quality and avoid interference, with detailed instructions on connecting the receiver, adjusting the antenna, and testing signal strength. The video aims to help beginners easily tune into new satellite frequencies and improve reception.

Takeaways

• 😀 The video aims to help beginners adjust their satellite dish to find the latest signal frequency from the Miasat 3B satellite.
• 😀 Users who are not receiving a signal after updating their frequency need to re-point their parabola antenna for better signal reception.
• 😀 The tutorial demonstrates how to adjust the signal on a digital Capision receiver, with the same steps applicable to other digital receivers.
• 😀 The first step is to access the menu on the remote and go to 'Installation' to adjust antenna settings, ensuring the LNB is set between 9.750 to 10.600 frequency range.
• 😀 The tutorial covers adding new transponder frequencies, such as 12.563 with a symbol rate of 31,000 and polarization 'H'.
• 😀 If the signal quality is initially low, the user is advised to check the signal intensity, which should reach at least 60% for proper antenna alignment.
• 😀 The video advises using a 10 or 12 wrench to adjust the antenna, ensuring it's positioned properly for optimal signal strength.
• 😀 To accurately adjust the satellite dish, the user should ensure the mast is perfectly vertical, using a water pass if available.
• 😀 For best results, the user should carefully rotate the antenna while monitoring the TV signal until it reaches the maximum quality (above 80%) for stable reception.
• 😀 Once the signal is maximized, the antenna's bolts should be tightened to ensure the settings remain fixed, providing consistent performance during cloudy conditions.

Q & A

What is the main purpose of this video?

The main purpose of the video is to guide beginners on how to search for signals from the latest frequencies of the Miasat 3B satellite and how to properly set up a satellite dish for optimal signal reception.

What do you need to do if you're not receiving a signal after adding the latest frequencies?

If you are not receiving a signal after adding the latest frequencies, you need to re-point the satellite dish antenna to ensure it is properly aligned to the satellite.

What brand and model of digital receiver is used in the video?

The video uses the digital receiver 'Kapision Romo C2000.'

How can you add the latest transponder frequencies on the receiver?

You can add the latest transponder frequencies by pressing the 'Start' button on the receiver's remote, then using the options for 'Add Transponder' (red button) and entering the new frequencies.

What are the two frequencies mentioned for Miasat 3B satellite?

The two frequencies for the Miasat 3B satellite mentioned in the video are 12,563 with a symbol rate of 31,000 (H polarization) and 12,643 with a symbol rate of 31,000 (H polarization).

What does the signal intensity need to reach for the dish to be correctly aligned?

The signal intensity needs to reach at least 60% to indicate that the digital receiver is connected to the satellite dish. However, for optimal signal quality, it is recommended to aim for over 80%.

What tool is necessary for adjusting the satellite dish?

A 10mm and 12mm wrench (spanner) are necessary for adjusting the satellite dish.

Why is it important to ensure the pole of the satellite dish is upright?

It is important to ensure the pole is upright because it will help in accurately aligning the satellite dish, making it easier to find the correct satellite signal.

What should you do if the signal quality is not appearing after adjusting the satellite dish?

If the signal quality is not appearing, you should continue adjusting the satellite dish's position (both vertically and horizontally) while monitoring the signal on the TV until the signal appears and reaches a good quality.

How do you finalize the setup after achieving the best signal quality?

After achieving the best signal quality, you need to tighten all the bolts and screws on the satellite dish to lock the settings in place and prevent the dish from moving.