[DIY] IR Sensor 5v Relay Module And Submersible Water Pump Wire connect || Indian Jogaru Expriment

Summary

This video demonstrates the process of creating a custom sensor-based water pump system. The script details step-by-step instructions on assembling and wiring basic components such as sensors, LEDs, relays, and a water pump. It covers essential wiring connections for power supply, ground, output, and the integration of LEDs for status indication. The video includes practical examples of testing the system, where the sensor activates the pump when an object is nearby, and the pump responds accordingly. The video aims to help viewers understand and build a functional water dispensing system.

Takeaways

• 😀 The speaker discusses the wiring process for setting up a sensor and relay for controlling a water pump.
• 😀 The components required for the setup include a sensor, a relay, LED lights (green and red), and a water pump.
• 😀 A 5V relay is used for controlling the water pump with the sensor, ensuring power supply and output connections are made correctly.
• 😀 The wiring process involves connecting specific pins on the sensor to the relay and pump for proper functionality.
• 😀 A key element of the setup is ensuring the correct connections to ground, power, and output pins on the sensor and relay.
• 😀 The sensor is designed to activate the water pump when a certain proximity is detected (like a hand being close).
• 😀 LEDs on the sensor indicate its status: green for active, red for error or standby mode.
• 😀 The script emphasizes the simplicity of wiring and the importance of following the correct pin configurations.
• 😀 Testing of the system involves simulating the hand's proximity to the sensor to trigger the pump's activation.
• 😀 The video ends with the promise of further details in the next video, including building a dispensing system with these components.

Q & A

What was the cost of the item mentioned in the video?

The item was purchased online for ₹220.

How can viewers purchase the item discussed in the video?

Viewers can purchase the item by visiting the link provided in the video description.

What is the purpose of the sensor mentioned in the video?

The sensor is used to detect proximity, triggering the operation of a water pump when an object is close.

What are the main components described in the video?

The main components discussed include an LED, a sensor, a relay, a water pump, and wires for connections.

How is the wiring explained in the video?

The wiring is explained step by step, with details on connecting the sensor, relay, and water pump using specific terminals such as 'Power', 'Ground', and 'Signal'.

What happens when the sensor detects an object?

When the sensor detects an object, it triggers the relay, turning on the water pump, as indicated by the activation of the LEDs (green and red).

What role do the LEDs play in the system?

The LEDs show the status of the system, with a red LED indicating the relay is active and a green LED showing the sensor is working.

What is the purpose of the relay in the setup?

The relay is used to control the activation of the water pump based on the signal from the sensor.

What does the video mention about testing the system?

The system is tested by placing an object near the sensor, causing the water pump to activate as the sensor detects proximity.

What additional explanation does the video provide for wiring the components?

The video provides detailed instructions on connecting the wires, including the use of specific terminals for power, ground, and signal connections, to ensure the system functions correctly.