Easy Two-Tone Paracord Bracelet Tutorial
Summary
TLDRThis tutorial offers a straightforward guide to crafting a two-color paracord bracelet. It utilizes Navy and white cords, requiring approximately 10 feet of cord in total. The process begins with melting the ends and threading them through a 58-inch clip from CDW plus.com. The tutorial emphasizes the importance of measuring wrist size accurately for a comfortable fit. The weaving technique involves crossing the desired middle color first, followed by a series of over and under maneuvers to create a pattern. The video also touches on how to reverse the colors for a different look and concludes with tips for finishing the bracelet ends with a lighter for a clean appearance.
Takeaways
- π This tutorial teaches how to make a paracord bracelet using two colors, navy and white.
- π οΈ The recommended tool for the project is a 58-inch clip from CDW plus.com and cord from campingsurvival.com.
- π It's suggested to use about 10 feet of cord, combining a 5-foot piece of navy and a 5-foot piece of white.
- π₯ The ends of the cords are melted and then pushed together to create a single 10-foot length.
- π The cord is threaded through the clip, with the melted ends flattened for easier passage.
- π Measuring the wrist size is identified as the trickiest part of the process when making the bracelet alone.
- π The color choice for the middle of the bracelet determines which color strand is crossed over first in the weaving process.
- π Weaving involves crossing one color over the other, then feeding the second color around the bracelet and through the loop created by the first color.
- π It's emphasized to pull tight on each weave to ensure a clean and neat final appearance.
- β© The tutorial suggests practicing the weave to improve speed and efficiency in making paracord bracelets.
- π§ The final steps include clipping the tag ends and using a lighter to finish off the ends for a clean look, with a caution about the heat of melting nylon.
Q & A
What is the tutorial about?
-The tutorial is about making a paracord bracelet with two colors.
What are the two colors of paracord used in the tutorial?
-The two colors of paracord used are Navy and White.
Where does the clip used in the tutorial come from?
-The clip used in the tutorial comes from CDW plus.com or Creative Design Works.
What is the length of the clip used for the bracelet?
-The clip used for the bracelet is 58 inches long.
Where does the paracord used in the tutorial come from?
-The paracord used in the tutorial comes from campingsurvival.com.
How much paracord is recommended to use for the bracelet?
-It is recommended to use about 10 feet of paracord for the bracelet.
What is the first step in making the bracelet according to the tutorial?
-The first step is to melt the ends of a 5-foot piece of Navy and a 5-foot piece of White paracord, push them together to create a 10-foot length.
How does one make the loop at the beginning of the bracelet?
-To make the loop, feed the two ends through the top of the clip, pull the excess through, and then pull the two tag ends back up and through the loop created.
Why is it suggested to flatten the melted ends of the paracord?
-Flattening the melted ends makes it easier for the paracord to pass through the clip.
How does one measure the wrist size for the bracelet?
-To measure the wrist size, clip the ends together, tighten slightly, and ensure there is some wiggle room so it's not too tight.
Which color is used in the middle of the bracelet in the tutorial?
-In the tutorial, Navy is used in the middle of the bracelet.
What is the technique for starting the weave on the bracelet?
-To start the weave, cross the color that will be in the middle (Navy in this case) over the other color (White), bring the other color (White) down over the first, and then feed it around the bracelet and up through the loop created with the first color (Navy), pulling it tight.
How does the tutorial suggest ensuring a clean look for the bracelet?
-The tutorial suggests pulling tight on each weave to ensure a clean look for the bracelet.
What is the cool feature of the two-tone weave mentioned in the tutorial?
-The cool feature of the two-tone weave is that it can be reversed, so if you were using a flat clip or no clip, you could have the other color in the middle instead.
How does one finish off the ends of the paracord after weaving the bracelet?
-After weaving, clip the tag ends and use a lighter to melt and finish off the ends for a clean look.
What precaution is mentioned regarding the use of a lighter to finish the paracord ends?
-The precaution mentioned is that the nylon paracord can get very hot when it melts, and it can stick to fingers, so care should be taken not to hold the lighter on it for too long.
Outlines
π¨ 'How to Make a Two-Color Paracord Bracelet' Introduction
The tutorial begins with an introduction to creating a two-color paracord bracelet using navy and white cords. The presenter recommends using a 58-inch clip from CDW plus.com and cords from campings survival.com. The process starts by melting the ends of two 5-foot cords and joining them to form a 10-foot length. The clip is then used to create a loop, and the tag ends are pulled through this loop. The presenter advises on flattening the melted ends for easier threading and demonstrates the initial setup for the bracelet weaving.
π 'Measuring and Weaving the Bracelet'
This section details the crucial step of measuring the wrist size for the bracelet. The presenter clips the bracelet together temporarily to take the measurement, ensuring there's enough room for comfort. The tutorial then moves on to the weaving process, explaining how to choose the color for the middle of the bracelet by crossing it over first. The presenter demonstrates the weaving technique, emphasizing the importance of pulling each weave tight to achieve a clean and neat appearance. The pattern begins to emerge, and the presenter offers encouragement to continue practicing for better results.
π₯ 'Completing the Two-Color Paracord Bracelet'
The final part of the tutorial focuses on completing the bracelet. The presenter shows how to continue the weaving pattern, maintaining the color in the middle by consistently crossing it over. They also mention the possibility of reversing the bracelet to change the color positions, suggesting a look at another tutorial for a bracelet without a buckle. The tutorial concludes with a demonstration of how to finish the ends with a lighter, cautioning about the heat of the melting nylon cord. The presenter invites viewers to leave comments, feedback, and requests, and thanks them for their support.
Mindmap
Keywords
π‘Paracord
π‘Bracelet
π‘Weave
π‘Clip
π‘Melted ends
π‘Tag ends
π‘Wrist size
π‘Two-color
π‘Crossing over
π‘Tightening
π‘Contoured clip
Highlights
Tutorial on making a two-color paracord bracelet
Materials needed: Navy and white paracord, clip from CDW plus.com, and a lighter
Recommendation to use 10 feet of cord, with 5 feet of each color
Instructions on melting the ends of the cords and pushing them together
Using a 58-inch clip and feeding the cord ends through the top
Tip to flatten the melted ends for easier threading through the clip
Creating a loop and pulling the tag ends through it
Measuring wrist size as the trickiest part of the process
Deciding which color to have in the middle of the bracelet
Crossing over technique to start the weave with the desired middle color
Weaving pattern explanation and demonstration
Importance of pulling tight on each weave for a clean look
Continuing the weave pattern with alternating colors
Option to reverse the bracelet for a different look
Speeding up the tutorial for viewers who are familiar with the process
Final steps of the weave and how to secure the ends
Safety tips for finishing off the ends with a lighter
Invitation for feedback and requests for future tutorials
Transcripts
got another tutorial for you today this
one has been requested a couple of times
so here it is it is the uh the easy
tutorial on how to do the paracord
bracelet in two colors so we have Navy
and
white and of course we have our clip
from CDW plus.com or Creative Design
works it's a 58 inch
clip and all my other tutorials these
are the ones that I use and I always
recommend them and then my cord comes
from campings survival.com I've always
gone there so let's jump
in I always say to use about 10 ft of uh
of cord so in this case I took a 5 foot
piece of Navy and a 5ft piece of
white and I melted the ends push them
together and then you have the 10t
length that you
need so we're going to go to our two
working
ends we're going to take half of the
clip feed the two ends through the
top so down through the
top you guys can make this a lot easier
on yourself by when you heat up and
mount the ends you can flatten them out
so they go through the clip a lot
easier so we'll pull that access
through so we have a little
Loop and then what we're going to do
with
that is pull the two tag
ends back up and through that Loop that
we just created
and then we're just going to
work this cord so we can get the melted
part on the
bottom just like
that so that's how your first end should
look we're going to go
down the
tags and we're going to feed it through
the
top down through the
top and pull that
through then this is where we're going
to measure our wrist
size this is really the only
part that is tricky once you guys got
the weave down I say this is the hardest
part at least measuring it by yourself
your and for
yourself clip that together and then
just tighten it a bit sorry about
bumping the camera you want some wiggle
room so it's not too tight but I think
that's good right there so we'll uncp
that and then we're ready to go for the
weave so right
now you can decide what which color
you'd
like to be in the middle so if we take a
look at this old bracelet purple and
white purple is in the middle and that
means we crossed over with purple first
so if you guys guys have seen my other
tutorials you're familiar with the
crossing over and and the the general
technique of everything so whichever
color we want in the middle we're going
to cross over first so in this case I'm
going to want Navy in the
middle so we're going to cross that over
to to the
right over the
top we're bring our white
piece over the
Navy like
so and we're going to bring it around
our two strands the main
bracelet and that Loop that you created
with the Navy strand you're going to
pull it
through and holding it in place you're
going to tighten both ends
ends to make your first
knot so now our Navy is on the right and
our white is on the left we're going to
take the
Navy cross it over the top bring the
white down over the
Navy feed it around the whole bracelet
and up and through that Loop that you
created with the Navy tag pull it
through and pull
tight you can already start to see the
pattern showing
through again with the
Navy bring the white down and
over back around the whole
bracelet up and through that Loop
and pull tight with each weave that you
do I really recommend you pull tight on
each one just so that you get the
cleanest looking bracelet at the end if
you don't pull tight and uh pull
evenly on each one it can it can be kind
of a mess and it's not going to look as
as clean as it could but it takes some
practice so Navy over the top white down
and over the Navy and around down the
back and through that
Loop Navy crosses
over the white crosses down and over
around the
back and through that
Loop if you guys want to keep going with
me feel free
if you guys got it down you can either
pause it or clip to the end of the
video and see how we end
it or keep chugging
along so that color that you want in the
Middle with the two colors if you're
doing the two-color paracore
bracelet that's always going to be the
color that you cross over no matter
which sides it's no matter which side
it's on that is the Strand that you're
going to be crossing
over so it's on the left we're going to
cross it over the top the white goes
over the
Navy back around and through that
Loop making sure to pull tight on each
one once you guys make a few
bracelets The Weave is pretty simple and
you can make the make the bracelets
pretty
quickly I'm going to speed up just a
little
bit just to get to the
end for
the cool thing about uh the two-tone or
the two-color
weave is that if we weren't
using uh a contoured
clip um which just means that it's
curved and it is supposed to just fit
around your wrist one way if we were
doing this with uh just an all flat clip
or we using um the version of a bracelet
with no clip you could reverse it
so now that you see the white is in the
middle and navy is on the outside as
opposed to Navy being in the middle so
it's kind of
cool if you guys would like to try that
you can check out my other uh tutorial
on how to make the make a paracore
bracelet without a buckle it's very
simple it's actually very
simple go check check that out leave a
comment let me know if this guys help if
this helps you guys um leave your leave
your comments leave your feedback if you
guys have any requests comment down
below and I'll try my best to respond to
those and fulfill any requests that you
guys
have so we're going to do one more weave
at the bottom
and tighten that making sure to pull
that one
tight and there is our
weave we're going to clip the tag
ends and then with our lighter we're
going
to finish
off the ends to get a clean
look just be careful this uh this nylon
cord the Paracord can get very hot when
it melts and it can stick to your
fingers and can be a mess um if you if
you hold the lighter on there for a
while so there you have it guys there is
our
two-tone paracord bracelet
leave a comment down below if this
helped if you guys have any
requests any feedback that you guys
might have leave it down
below thank you guys for watching you
guys are great thank you for all the
support with my
videos check out all my other videos
check out the other tutorials and we
will see you guys soon see you
Browse More Related Video
5.0 / 5 (0 votes)