Cara Setting IP Camera Hikvision Dari Nol
Summary
TLDRThis instructional video offers a comprehensive guide on setting up an IP camera from scratch. It covers the initial steps of powering on the camera, connecting it to a network, and accessing it via a web browser. The tutorial then delves into configuring network settings, enabling platform access for remote viewing, and optimizing video and audio quality. It also touches on image adjustments, event settings like motion detection, and storage management. The presenter ensures that viewers can follow along with clear instructions, aiming to make the setup process accessible for everyone.
Takeaways
- π Start by ensuring your IP camera is powered on, either through a power adapter connected to the DC port or via a PoE switch if the camera supports Power over Ethernet.
- π Check that the camera is connected to the same network as your computer or laptop, which will be used for setup.
- π Use the SADP tool or a web browser to detect and activate the camera if it's not active. The SADP tool can directly activate the camera.
- π» Once the camera is active, access it through a web browser. You'll be prompted to create a new password and confirm it for security.
- π Set up security questions for account recovery in case you forget your password in the future.
- π§ Provide an email address for password recovery purposes.
- π₯ After successful login, you'll be taken to the live view, indicating the camera is activated and ready for configuration.
- βοΈ Navigate to the 'Configuration' menu to set up network settings. Ensure DNS and gateway settings are correct for your network.
- π‘ In 'Advanced Settings', enable 'Platform Access' to allow access to the camera remotely through a smartphone app without needing to connect to an NVR or DVR.
- π₯ Under 'Video Audio' settings, ensure both video and audio are selected for the main stream to record both visuals and sound.
- π Don't forget to enable the audio input if it's not already active, and adjust audio settings as needed.
Q & A
What is the first step in setting up a Hikvision IP camera?
-The first step is to ensure that the IP camera is powered on. You can either use a power adapter connected directly to the DC port or a PoE switch if the camera supports Power over Ethernet (PoE).
How do you check if the IP camera is properly connected to the same network as your computer?
-You can check the connection by using the SADP tool to detect the IP camera. Additionally, you can ping the IP camera from your computer using CMD to ensure itβs on the same network.
What should you do if the IP camera's status is 'inactive'?
-You can activate the camera using the SADP tool or a web browser. The activation process involves creating a password and configuring security settings.
What is the purpose of setting a security question and email recovery during the camera activation?
-Setting a security question and email recovery helps in case you forget the password. These options allow you to recover your password securely.
How do you ensure that the camera can be accessed remotely from a mobile phone?
-You need to enable the 'Platform Access' feature, create a verification code, and ensure the camera's status is 'online'. This allows access through the Hik-Connect app on your phone.
What are the important settings to configure in the 'Video/Audio' section?
-In the 'Video/Audio' section, ensure that the video stream includes both video and audio, adjust the resolution, bitrate, and frame rate, and enable H.265+ encoding to optimize storage usage.
How do you configure motion detection for the Hikvision IP camera?
-You can enable motion detection by going to the 'Event' menu, enabling it, drawing the detection area, and setting the schedule. You can also choose to receive notifications or trigger recording based on motion.
How do you configure the storage settings for continuous recording?
-Go to 'Storage Management', ensure that the memory card is inserted and formatted if necessary, then configure the recording schedule to 'Continuous' for 24-hour recording.
What should be done if the camera is not recording audio?
-Go to the 'Audio' section, ensure that audio input is enabled and set to default. This will allow the camera to record audio along with the video.
How can you adjust the image settings such as brightness or orientation?
-In the 'Image' menu, you can adjust settings like brightness, contrast, and orientation. You can also enable Smart Supplement Light for night vision if the camera supports it.
Outlines
πΉ Introduction to Setting Up Hikvision IP Camera
The speaker begins by introducing the tutorial on setting up an IP camera from scratch, emphasizing the initial steps. They ensure the camera is powered on and connected to a network, either directly or via a PoE switch. The audience is guided to check the camera's IP address using a tool like SADP or by pinging it from a computer. The speaker then demonstrates accessing the camera through a web browser, creating a new password, and setting up security questions for account recovery. The tutorial aims to help users configure their Hikvision IP cameras for the first time.
π§ Advanced Network and Video Configuration for IP Camera
The speaker dives into the network settings of the IP camera, explaining how to configure DNS and gateway. They discuss enabling 'Platform Access' for remote viewing via a smartphone app and creating a verification code for secure access. The tutorial then moves on to video and audio settings, where the speaker optimizes the video stream for both quality and audio recording. They guide viewers on adjusting resolution, bitrate, video quality, and frame rate. The speaker also touches on video encoding, recommending H.265 for better storage efficiency. The paragraph concludes with saving the settings and briefly discussing substream configuration.
π₯ Finalizing Video and Audio Settings for the IP Camera
Continuing with the setup, the speaker ensures the audio is enabled and adjusted correctly. They then move on to image settings, explaining the use of 'Smart Hybrid Light' for optimal lighting conditions. The tutorial includes adjusting brightness and contrast, and the speaker mentions exploring additional image adjustments for customization. The speaker also discusses OSD (On-Screen Display) settings, allowing users to display camera names and timestamps. The tutorial then covers event settings, particularly motion detection, and how to configure the recording schedule based on motion triggers. The speaker concludes with storage management, ensuring the memory card is formatted and set for continuous or motion-triggered recording.
π± Wrapping Up the IP Camera Setup Tutorial
In the final paragraph, the speaker summarizes the basic settings covered in the tutorial and hints at future videos that will address connecting the IP camera to a smartphone and other advanced topics. They encourage viewers to subscribe, like, and share the video, and end the tutorial with a farewell message, emphasizing the usefulness of the video and the hope that it aids viewers in setting up their Hikvision IP cameras.
Mindmap
Keywords
π‘IP Camera
π‘Hi Vision
π‘Power Adaptor
π‘PoE (Power over Ethernet)
π‘Network
π‘SADP Tool
π‘Web Browser
π‘Password
π‘Security Question
π‘Live View
π‘Configuration
π‘Video Stream
π‘Audio
π‘Image Adjustment
π‘Motion Detection
π‘Storage Management
Highlights
Introduction to setting up an IP camera from scratch.
Ensuring the IP camera is powered on and connected to the network.
Using a power adapter or PoE switch for camera connection.
Checking camera connectivity through a laptop or computer.
Utilizing the SADP tool to detect and activate the camera.
Accessing the camera through a web browser for setup.
Creating a new password for the camera upon first access.
Setting up security questions for account recovery.
Configuring email for password recovery purposes.
Accessing the live view to confirm camera activation.
Navigating to the configuration menu for network settings.
Adjusting DNS and gateway settings for network stability.
Activating platform access for independent camera access.
Creating a verification code for platform access.
Setting video and audio preferences for the camera stream.
Optimizing video quality and frame rate for better performance.
Configuring audio input and ensuring it is enabled.
Adjusting image settings like brightness and smart lighting.
Customizing the camera's OSD display for time and date.
Enabling motion detection and setting the detection area.
Configuring storage management and setting up recording schedules.
Finalizing settings and providing a basic setup guide for future reference.
Encouraging viewers to subscribe, like, and share the video for more content.
Transcripts
baik bismillahirrahmanirrahim
assalamualaikum warahmatullahi
wabarakatuh Selamat datang di CC TV
update Pada kesempatan kali ini saya
ingin berbagi kepada teman-teman semua
Bagaimana cara untuk setting IP camera
Hi Vision mulai dari nol ya artinya
mulai dari awal jadi ketika pertama kali
teman-teman beli IP kamera dan
teman-teman pengin melakukan penyetingan
nah ini adalah step-step eh teman-teman
yang perlu teman-teman perhatikan di
dalam melakukan setting IP Camera
hiquision
langkah pertama ya pastikan e IP kamera
teman-teman sudah eh teman-teman
Nyalakan Ya itu teman-teman bisa
menggunakan power adaptor langsung
connect ke apa namanya port dc-nya atau
teman-teman bisa menggunakan switch Poe
manakala IP kamera teman-teman sudah
support eh Power melalui e ethernet atau
Poe gitu ya dan pastikan juga
teman-teman sudah menghubung ee IP
kamera teman-teman ke dalam satu
jaringan dengan laptop ataupun komputer
yang teman-teman akan gunakan untuk
melakukan penyettingan Nah untuk eh
mengeceknya pastikan teman-teman sudah
mendeteksi ya IP kamera teman-teman di
aplikasi sadp tool ya atau sadp nah pada
saat pertama kali teman-teman apa
namanya mencoba untuk mendeteksi
statusnya itu masih inaktif ya jadi
belum aktif
Nah untuk melakukan aktivasi itu
sebenarnya bisa langsung menggunakan
sadp tool-nya ini ya Langsung diaktivasi
di sini atau langsung menggunakan
browser tetapi karena di sini saya akan
menyambungnya bukan hanya sekedar
memberikan password saja tetapi juga
melakukan penyetingan-penyetingan
selanjutnya maka saya prefer untuk
menggunakan web browser nah caranya
teman-teman Eh cukup Dou Klik di sini
tapi pertama-tama ama pastikan ya IP
kamera teman-teman ini sudah bisa
teman-teman akses atau sudah bisa
teman-teman ping melalui komputer
teman-teman teman-teman bisa gunakan CMD
ya kalau misalkan ee pengin memastikan
gitu Ya karena ya kalau misalkan apa
namanya IP kamera teman-teman belum
terhubung ke dalam satu jaringan
Kemungkinan dia tidak bisa dipink ya
kalau seperti ini artinya sudah bisa
dipink karena kebetulan IP kamera Hi
Vision ini sudah satu jaringan dengan
router yang saya gunakan berbeda halnya
kalau misalkan routernya ip-nya bukan
satu tapi 100 atau 0 maka teman-teman
perlu untuk menyesuaikan terlebih dahulu
begitu ya Oke karena ini ip-nya sudah
sesuai maka kita tinggal Dou klik saja
Nah kalau teman-teman e sudah satu
jaringan maka IP kameranya akan bisa
diakses nah pertama-tama teman-teman
akan diminta untuk membuat password dan
mengonfirmas
passwordnya oke di sini saya akan buat
password baru
ee teman-teman bisa menggunakan
kombinasi huruf besar huruf kecil dan
angka syukur-syukur teman-teman
menggunakan e karakter ya supaya lebih
aman lagi tapi pastikan teman-teman
mengingatnya kalau sudah teman-teman
bisa klik
Oke selanjutnya teman-teman akan diminta
untuk membuat security question ya Nah
ini e kalau seperti ini umumnya kalau
saya mencari gampangnya seperti ini saja
tetapi ya teman-teman jangan tiru saya
tetapi ini hanya untuk memudahkan saja
Tetapi kalau teman-teman punya jawaban
khusus dan juga pilih apa namanya punya
pertanyaan khusus silakan saja tetapi
saya biasanya akan menggunakan e apa
namanya pertanyaan default kemudian
jawabannya adalah AC supaya memudahkan
Ketika nanti verifikasi tetapi ini tidak
saya sarankan untuk teman-teman terus
kemudian juga kita ee diminta untuk
masuk masukkan password recovery ya
Ee via email ya nanti jadi kita bisa
menggunakan email ini untuk recovery
password manakala kita lupa nah kalau
sudah teman-teman bisa klik
oke Oh di sini apa namanya tidak
diizinkan ya jadi saya akan coba apa
namanya apa ya
ini
kalau kayak gini boleh enggak
ya karena biasanya sih bisa sepertinya
tapi ini tadi tidak bisa Oh ini juga
tidak tidak boleh ya
Oke kalau ee seperti ini teman-teman
bisa pilih apa
namanya warna Kayak gini misalkan ya
terus
kemudian pilih yang teman-teman apa
sesuailah
ya
Oke seperti ini saja kalau apa namanya
tadi jawaban a bc tidak bisa teman-teman
bisa pilih yang sesuai dengan jawaban
teman-teman dan pertanyaan yang
teman-teman pilih
oke nah kalau sudah teman-teman akan
dibawa ke tampilan live view seperti ini
ya ini artinya eh apa namanya eh IP
kamera teman-teman sudah berhasil
diaktivasi Oke selanjutnya apa saja yang
perlu kita setting untuk IP kamera kita
pertama-tama Silakan masuk ke menu
configuration ya oke nah di menu
configuration ini teman-teman Eh
pertama-tama bisa setting di network ya
biasanya kalau saya di network di sini
Nah di sini Itu kan masih eh default ya
masih default seperti ini nah biasanya
kalau misalkan ini sudah bisa diakses
teman-teman tinggal tambahkan saja untuk
ee di
nya dns-nya samakan saja dengan default
gway-nya kemudian alternate dns-nya isi
8.8.88 setelah itu teman-teman bisa klik
save ya Nah setelah itu teman-teman
lanjut ke menu Advance setting nah di
Advance setting ini yang perlu kita
lakukan adalah pergi ke platform akses
ini apa namanya berlaku manakala
teman-teman ingin mengakses Mandiri IP
kamera H teman-teman karena i kamera
teman-teman ini bisa teman-teman akses
Mandiri melalui handphone tanpa harus
connect ke nvr ataupun DVR ya Nah di
sini kalau misalkan teman-teman ingin
connect secara langsung maka teman-teman
perlu mengaktifkan platform akses ini ya
ini diaktifkan terus kemudian
teman-teman membuat verification code Ya
silakan buat verification code
teman-teman nah ini teman-teman boleh
samakan dengan password teman-teman
ataupun juga boleh bedakan
yang penting teman teman-teman adalah
ingat ya kuncinya Terus kalau sudah
teman-teman bisa klik save
ya Nah ini statusnya register statusnya
pastikan sudah online kalau masih
offline seperti ini teman-teman pindah
saja ke menu lain kemudian balik lagi ke
platform akses Nah sekarang statusnya
sudah online Nah kalau sudah online
seperti ini nanti teman-teman bisa akses
menggunakan aplikasi heconnect di
handphone teman-teman oke nah ini
network-nya kita sudah setting
selanjutnya kita akan masuk ke menu
video audio nah di video audio yang
terpenting adalah nah ini ya IP kamera
ini
eh kebetulan sudah support audio ya Jadi
kalau teman-teman pengin mengoptimalkan
teman-teman pilih di sini video
streamnya ya ini kan ada dua ya ada
mainstam ada substream nah kita setting
dulu yang mainstream-nya video tipenya
pilih yang video dan audio ya supaya
nanti video kita itu juga bisa
mengeluarkan audio atau merekam audio
nah resolusinya teman-teman silakan
sesuaikan karena ini kamera 8 MP maka
teman-teman bisa pilih yang maksimal 8
MP atau juga pilih yang eh resolusi
lebih rendah di sini saya e pilih yang
paling tinggi terus kemudian bit rate
kemudian video quality frame rate Nah
teman-teman bisa sesuaikan Nah kalau
bitrate saya sarankan tetap variabel Nah
kalau video quality kalau misalkan
teman-teman apa namanya pengin akses
secara mandiri menggunakan handphone
Pilih Saja high terus kemudian frame
rateennya pilih yang paling tinggi
sayangnya IP kamera ini hanya sampai
12,5 saja tetapi tidak masalah terus
kemudian video encoding ya teman-teman
kalau misalkan apa namanya mau
memaksimalkan penyimpanan pilih yang
h265 ya supaya tidak boros penyimpanan
h265 plus-nya teman-teman bisa aktifkan
ya terus kemudian ini biarkan ya Terus
kalau sudah teman-teman bisa klik save
Nah kalau sudah save teman-teman balik
ke sini terus pilih yang substream-nya
tadi kan baru mainstream substream-nya
juga Sama ini pilih yang video audio
resolusinya teman-teman bisa maksimalkan
juga kalau mau diakses Mandiri kemudian
video quality-nya pilih yang highest
terus pilih yang 12,5 tapi intinya di
sini tidak harus ya ini teman-teman
silakan sesuaikan dengan kebutuhan
teman-teman kalau saya kebetulan akan
menggunakan ini ya jadi saya pilih yang
ee apa namanya settingan-settingan
seperti ini kemudian kita klik save lagi
nah sampai di sini untuk yang settingan
video sudah selesai Sekarang kita masuk
ke audio karena ee di audio ini
terkadang juga belum on ya kalau sudah
on Ya kita ee apa namanya tidak usah
ganti tapi kalau misalkan belum on
silakan teman-teman nanti on-kan ya
pastikan ini on ya audio input-nya juga
make in ini pilih default saja enggak
ada masalah terus kemudian klik save
Oke sampai di sini eh apa namanya video
audio sudah selesai kemudian selanjutnya
kita ke menu image nah di menu image apa
saja yang perlu disetting Biasanya kalau
saya saya adalah ini ya di dnnet nah di
dnnet ini Smart suplementen light-nya
masih off ya jadi eh apa namanya
kebetulan IP kamera saya ini menggunakan
Smart Hybrid light Nah kalau menggunakan
Smart Hybrid light untuk mengaktifkannya
ini harus di on ya Harus di-on ya
kemudian suplemen light-nya pilih yang
smart ya Ya kalau sudah seperti ini
teman-teman bisa ee save ya tetapi ini
tidak perlu di-save sudah tersimpan
terus juga teman-teman bisa explore di
sini ya di misalkan di Image adjustment
ya brightness-nya kalau mau dirubah
silakan kemudian osurnya
ya terus kemudian kalau misalkan
pemasangannya mau
dibalik begini juga bisa Ya nantinya
adanya di video adjustment ya kalau mau
di ee Biarkan saja itu juga tidak ada
masalah Oke sampai di sini ee di bagian
display setting sudah selesai nah
kemudian juga umumnya di osd ini diosd
ini biasanya teman-teman akan sesuaikan
di sini ya Kameranya nama kameranya ee
dan juga apa namanya
eh format time-nya ya atau juga di sini
juga kita bisa apa namanya mau kita
pakai atau enggak gitu ya display
date-nya juga bisa ya silakan nanti
disesuaikan tapi kalau saya saya biarkan
seperti ini n teman-teman bisa apa
namanya o
sendiri terus kemudian selanjutnya ke
menu
event kalau teman-teman mau mengaktifkan
E Motion detection silakan e dienable
seperti ini kemudian di draw area ya di
draw area kemudian digeser seperti ini
kemudian diklik save nah kemudian di
sini arm schedule-nya biarkan seperti
ini linkage method-nya mau apa ya mau
notifikasi ke aplikasi atau juga upload
ke memory card ya juga ada nanti Trigger
recording kalau seperti itu klik save
nah motion detection sudah terus
selanjutnya di storage ya di storage itu
pertama-tama masuk ke storage management
ya Nah pastikan teman-teman sudah
memasukkan memory card kalau statusnya
sudah normal Biarkan saja Tetapi kalau
statusnya belum normal maka teman-teman
perlu melakukan format ya Nah karena ini
sudah normal maka saya tidak melakukan
format Nah selanjutnya tinggal schedule
eh setting ya di sini ini mau recordnya
pakai apa ya di sini kita enable dulu
Nah kalau misalkan mau continue 24 jam
pilih continuous kemudian tinggal diraw
G ya ya diklik seperti ini terus di sini
ada copy ini pilih untuk eh all ya untuk
seluruh hari kalau misalkan mau
disamakan kalau mau dibedakan juga tidak
ada masalah misalkan cuma dipilih ee
salah satu tidak gitu misalkan hari ee
Minggunya tidak Ya itu terserah
teman-teman tapi kalau di sini saya
pilih all kemudian klik oke Maka nanti
akan ada tampil seperti ini nanti
teman-teman juga bisa pilih yang mode
motion juga bisa ya Terus kalau sudah
klik save Oke sampai di sini pengaturan
sudah selesai Ya kurang lebih sudah
selesai ini merupakan pengaturan dasar
yang teman-teman nanti bisa setting
untuk IP kamera teman-teman Nah
selanjutnya nanti mungkin ada connect
apa namanya IP kamera ke handphone dan
yang lainnya mungkin akan disambung di
video selanjutnya Baik teman-teman saya
kira seperti itu ya bagaimana cara untuk
eh setting IP kamera hig Vision ya
semoga videonya bermanfaat jangan lupa
untuk subscribe bagi yang belum kemudian
like videonya dan bagikan ke seluruh
media sosial teman-teman semua sampai
jumpa di video-video selanjutnya saya
akhiri asalamualaikum warahmatullahi
[Musik]
[Musik]
wabarakatuh
than
Browse More Related Video
Aktivitas Belajar 2.2
How to Enable DITO SIM to All Xiaomi Phones
CΓ i ΔαΊ·t modem Viettel F670Y thΓ nh cα»₯c phΓ‘t Wifi mα» tα»ng
MUDAH TERNYATA!!!.. Begini Cara Reset IP Camera Hikvision Terbaru
Access Linux Server Remotely Using SSH - Putty | Windows CMD | GitBash | MobaXterm
How to Set up a Shopify Store in 13 Minutes - Shopify Tutorial for Beginners
5.0 / 5 (0 votes)