Cara Membuat Seruling Bambu Nada E Bass | 100 % akurat
Summary
TLDRIn this tutorial, the creator demonstrates how to craft an Ebas flute from bamboo, contrasting with a previous tutorial using a pipe. The bamboo is 60 cm long with a 2.2-inch diameter. Key steps include creating a blow hole 11 cm from the tip, sanding for neatness, and tuning the flute to achieve the correct E tone. Holes for different musical notes are precisely measured and drilled, ensuring the flute produces accurate tones. The video guides viewers through the process with clear instructions and measurements for each step.
Takeaways
- π The tutorial is about making an Eβ flute from bamboo, contrasting with a previous tutorial using a pipe.
- π¨ Essential tools for crafting the flute are mentioned, emphasizing the simplicity of the process.
- π The bamboo used is specified to be 60 cm in length with a 2.2-inch diameter.
- πΆ A blow hole is created, positioned 11 cm from the tip of the bamboo.
- βοΈ The tutorial involves using a knife and sanding to refine the hole's neatness.
- π΅ The process includes placing a tuner about one centimeter away from the blow hole to adjust the sound.
- πΌ The goal is to achieve an Eβ tone, which requires creating a hole at the end of the bamboo.
- π The distance from the end of the blow hole to the E note is measured to be 42 cm.
- π³οΈ All holes, including blowholes and nado holes, are made with a one-centimeter diameter.
- π’ Detailed measurements are provided for the distances between the blowhole and each tone hole (38.4 cm for Re, 30 cm for Mi, 28 cm for Nada).
- π¦ The tutorial encourages viewers to follow along with the video for a more comprehensive understanding.
Q & A
What is the main topic of the tutorial?
-The tutorial is about making an Eβ flute from bamboo.
What materials and tools are needed to make the bamboo flute?
-The tools needed include a knife and sandpaper. The material is a bamboo piece with specific dimensions.
What is the length of the bamboo used for the flute?
-The length of the bamboo used is 60 cm.
What is the diameter of the hole in the bamboo flute?
-The diameter of the hole in the bamboo is 2.2 inches.
How far is the blow hole from the tip of the bamboo?
-The blow hole is 11 cm from the tip of the bamboo.
What is done to make the blow hole neat and clean?
-A knife is used to make the blow hole, and then it is sanded to make it neat.
What is the purpose of the tuner mentioned in the script?
-The tuner is used to adjust the tone of the flute to ensure it sounds correct.
How is the E tone achieved on the bamboo flute?
-The E tone is achieved by punching a hole at the end of the pipe and adjusting it to get the perfect tone.
What is the distance from the end of the blow hole to the E note hole?
-The distance from the end of the blow hole to the E note hole is 42 cm.
What is the diameter of the tone holes on the bamboo flute?
-The diameter of all tone holes, including the blowhole and nado holes, is one centimeter.
How are the distances between the tone holes measured?
-The distances between the tone holes are measured from the end of the blow hole to the center of each tone hole.
What is the distance from the blow hole to the re tone hole?
-The distance from the blow hole to the re tone hole is 38.4 cm.
What is the distance from the blow hole to the mi tone hole?
-The distance from the blow hole to the mi tone hole is 30 cm.
What is the distance from the blow hole to the nadafa hole?
-The distance from the blow hole to the nadafa hole is 28 cm.
Outlines
πΌ Crafting a Bamboo Ebas Flute
This tutorial focuses on creating a traditional musical instrument, the Ebas flute, using bamboo as the primary material. The instructor outlines the necessary tools and begins by preparing a bamboo piece measuring 60 cm in length with a 2.2-inch diameter. A blow hole is crafted 11 cm from the tip of the bamboo, which is then sanded for neatness. The process of tuning the flute to produce the correct 'E' note is described, involving the creation of a hole at the end of the bamboo. The instructor provides precise measurements for the placement of the holes relative to the blow hole, ensuring the flute produces accurate musical tones. The tutorial includes practical demonstrations and adjustments to achieve the desired sound, with the final step being a test of the flute's tuning.
Mindmap
Keywords
π‘Ebas flute
π‘Bamboo
π‘Blow hole
π‘Tuning
π‘Tone hole
π‘Diameter
π‘Musical notation
π‘Sanding
π‘Measurement
π‘Crafting
π‘Hole punching
Highlights
Introduction to making an ebas flute from bamboo
Preparation of tools required for making the flute
Selection of bamboo with specific dimensions
Making the blow hole at a specific distance from the tip
Sanding the blow hole for neatness
Placement of the tuner in the bamboo
Adjusting the flute to produce an e tone
Creating a hole for the e tone and its placement
Measuring the distance for the tone hole from the blowhole
Specifying the diameter of the tone hole
Uniformity in the diameter of all holes
Distance measurement for the next hole from the blowhole
Detailing the exact measurement for the re tone hole placement
Measurement for the Mi tone hole placement
Measurement for the nadafa hole placement
Guidance on following the tutorial for hole placement
Final testing of the flute's tone accuracy
Transcripts
hello hello
guys On this occasion I will share a tutorial on how to
make an ebas flute from bamboo Previously I made a flute
on e but from a pipe this time I will make it from bamboo then prepare
the following tools I use poor, guys, so it's easy To make a hole,
first of all, we prepare this bamboo. The length is
60 cm. The diameter of this hole is 2.2
inches
. [Music] What we are doing
is making a blow hole, the distance from the MIPA tip of the blow hole is 11 cm
. we used a knife and then we sanded it so it was neat
[Music]
after we made it then we put it in the bamboo
about one centimeter away from the blow hole
[Music]
After that we tuned the tuner. Is the tone already uh [Music] woman on
doesn't sound right yet e OK Guys, we'll to make it an
e tone, the way we do it is to punch a hole in the end of the pipe like this.
It was the first hole I made, but it didn't exist yet so I made it
next to it so that the tone is perfect Let's try blowing [Music]
TTS we have got for the distance from the end of the blow hole which I line to the end of the
E note or the donya tone, which is 42.com 12 cm for the diameter of the hole I made one cm All
blowholes and nado holes are one centimeter in diameter or one centimeter wide.
[Music]
Hey, butterfly,
I'll tell you about the distance from the next hole. OK [Music] Here's the distance
from the blowhole to the tone hole. Count the distance from the blowhole
to the center. - in the middle of the tone hole remember the middle here yes right from
the end of the blow hole to the middle of the re tone hole the distance is 38.4 cm
from the end of the blow hole to the Mi tone 30 cm Day the end of the blow hole to the nadafa 28
cm extinguisher in the middle, for the next net,
I've told you in the text, you can follow the video [Music] Hi [Music]
Let's try blowing Is it the right tone Let's try
Who
Leads You
Browse More Related Video
Benchwork and Layout part 1
Extendable Farmhouse Table
Fusion 360 beginner's Exercise #8 - Fusion 360 tutorial
Fusion 360 beginner's Exercise #6 - Fusion 360 tutorial | Spark Plug |
Cara membuat kerajinan dari bambu yang mudah | nih yang lagi cari tugas kerajinan di skolah
Fusion 360 beginner's Exercise #10 - Fusion 360 tutorial
5.0 / 5 (0 votes)