Penyambungan Kabel Dropcore dan Pigtail Fiberoptic
Summary
TLDRThis video script details the meticulous process of cable splicing in telecommunications. It begins with the preparation of the drop core cable, including stripping and cutting the protective sheath and the core itself. The focus then shifts to the careful stripping of the cable's coating using a specialized tool, ensuring cleanliness for a secure connection. The script emphasizes the importance of precision in cutting the cable to the exact length and aligning it correctly for splicing. The process concludes with the use of a splicer and a heat gun to finalize the connection, highlighting the technical skill required in this field.
Takeaways
- 🔌 The process involves connecting a drop core cable, which is a type of network cable.
- ✂️ The end of the cable is stripped to remove the outer sheath, revealing the inner core wires.
- 🔧 A protective coating is removed from the core wires using a stripping tool, and it's important to ensure the coating is clean.
- 💡 The use of alcohol and a tissue is suggested for cleaning the stripped coating to prepare it for connection.
- 📏 The script mentions cutting the cable to a specific length, 20 millimeters, to prepare it for the connection.
- 🔗 The cable is then inserted into a connector, ensuring it is straight and not bent, to avoid connection issues.
- 🔄 A device called a 'spliter' is used to cut and prepare the cable ends for secure connection.
- 🔑 The script emphasizes the importance of correct positioning and locking the cable in place to ensure a good connection.
- 🛠️ Additional steps involve preparing the protective jacket of the cable, removing any excess and ensuring cleanliness.
- 🔍 The use of an OTDR (Optical Time Domain Reflectometer) is mentioned for measuring the cable's length and checking for faults.
- 🌡️ The process includes a heating step, which is crucial for securing the cable connection, possibly using a heating tool.
Q & A
What is the first step in the cable connection process described in the script?
-The first step is to prepare the drop core cable by cutting off the excess part of the previous use, removing the sheath, and separating the cable.
Why is it necessary to strip the cable's coating?
-Stripping the cable's coating is necessary to expose the core wires for proper connection and to ensure a good electrical contact.
What is the purpose of using a stripper tool in the process?
-The stripper tool is used to remove the outer coating of the cable without damaging the inner core wires, ensuring a clean and safe connection.
How should one choose a good stripper tool for the job?
-A good stripper tool should be sharp and not dull or bent. It's important to test the tool to ensure it can cleanly strip the coating without damaging the core wires.
What is the significance of cleaning the stripped cable with alcohol and a tissue?
-Cleaning the stripped cable with alcohol and a tissue helps to remove any residue from the stripping process, ensuring a clean surface for better connection quality.
What is the recommended length for cutting the cable after stripping?
-The recommended length for cutting the cable after stripping is 20 millimeters, as mentioned in the script.
How should the cable be positioned before cutting with the cable cutter?
-The cable should be held firmly and straight, ensuring it is not bent or twisted, and then slowly and carefully cut with the cable cutter to avoid breaking the core wires.
What is the purpose of the 'slep' mentioned in the script?
-The 'slep' is a protective sleeve or cover that is placed over the connection point to provide additional protection and ensure the integrity of the connection.
How does the script ensure the quality of the cable connection?
-The script describes using a measurement tool to check the loss of the connection, with a target of 0.03 loss, and in the script, a 0.02 loss is achieved, indicating a good quality connection.
What is the final step described in the script for completing the cable connection process?
-The final step is to heat shrink the protective sleeve over the connection using a heat gun, ensuring it fits tightly and securely to protect the connection.
What is the purpose of using an OTDR in the script?
-An OTDR (Optical Time Domain Reflectometer) is used to measure the length of the cable and detect any faults or imperfections in the cable for the next steps in the network setup.
Outlines
🛠️ Core Cable Preparation and Stripping
This paragraph details the process of preparing and stripping a core cable for connection. It starts with cutting the excess cable and removing the protective sheath, revealing the core wires. The importance of using a sharp stripper tool is emphasized to avoid damaging the cable's coating. The process involves stripping the coating to expose the core, cleaning it with alcohol, and ensuring a clean cut of 20 millimeters from the black-colored end of the drop core cable. The use of a splitter machine is also mentioned, with instructions on how to activate and use it properly to ensure a straight and clean cut.
🔍 Accurate Cable Connection and Loss Measurement
The second paragraph focuses on the precise connection of the cable and the measurement of connection loss. It describes the steps to prepare the cable, including removing the outer yellow sheath and cleaning the inner white tube. The paragraph emphasizes the need for careful and accurate cutting to ensure a good connection. The use of a tool to measure the loss of the connection is highlighted, with a target loss of 0.03, but the actual measured loss is 0.02, indicating a successful connection. The paragraph concludes with the process of placing a protective sleeve (slep) over the connection and heating it to secure the connection.
Mindmap
Keywords
💡Pikel
💡Drop Core
💡Pelindung Hasil
💡Striper
💡Coating
💡Splice
💡OTDR
💡Pemanas
💡Slep
💡Los
💡Piktil
Highlights
The process begins with identifying and preparing the cable drop core.
Cutting the excess cable to prepare for the connection.
Stripping the cable to expose the core, noting the difference in the size of the metal casing.
The importance of using a good quality stripper tool is emphasized.
Testing the stripper to ensure it is sharp and effective.
Cleaning the stripped cable with alcohol and a tissue to prepare for the connection.
Measuring and cutting the cable to a specific length for the connection.
Using a fiber optic cleaver to prepare the cable ends for splicing.
Ensuring the cable is straight and aligned correctly before cleaving.
Activating the cleaver and preparing the cable for splicing.
Approaching the cleaver needle carefully to avoid damage.
Securing the cleaved cable end and proceeding with splicing.
Preparing the protective sleeve for the spliced connection.
Measuring and cutting the protective sleeve to fit the splice.
Inserting the spliced cable into a heating element for fusion.
Ensuring the cable is centered and not pinched during the heating process.
Activating the heating process and waiting for it to complete.
Using an OTDR to measure the length and attenuation of the spliced cable.
Achieving a low loss measurement, indicating a successful splice.
Transcripts
Oke sebelum melakukan penyambungan pikel
dan drop Core yang pertama itu kabel
drop Core ujungnya yang ini kabel
Pil Kita pada kabel drop Core kita
potong saja sisa dari penggunaan
sebelumnya terus dikupas di ada ini baja
beda sedikit dia agak besar kat bajanya
dipisah sementara kaat bajanya itu kita
potong sekitar sat jengkal lebih atau
dua jengkal juga boleh nah terus ujung
kabel droper yang tadi di karena bengkok
kita potong sedikit
n jadi berikutnya adalah memasukkan
yaitu protection S ya pelindung hasil
sambungan
Nanti pada drop Core Jadi bukan pada
pikel karena ini akan kita
pegang kita sambil dilur luskan kabel
drop corore-nya terus sediakan itu strip
apa striper drop corore
oke striper doprong yang digunakan ini
ada karena banyak sudah tumpul di meja
ini jadi carilah yang bagus ya ini salah
satu contoh yang sudah tumpul nah ini
kalau sudah begini Jangan dilanjut ya
Ini dipotong dipotong lagi saja dibuang
Nah coba striper yang lain karena banyak
sudah tumpul nah coba kita tes yang ini
Nah ini bisa dapat dia Nah tapi dia di
sini sudah dikupasnya juga coatingnya
sudah terkupas ya Jadi kalau sudah
mendapatkan Coating terkupas tidak
masalah malah lebih bagus makuk Coating
itu yang warna birunya ya warna birunya
terkupas habis tidak masalah jadi
tinggal apa tapi kalau belum
terkupasah jadi dikupas Coating itu yang
warna birunya sampai bersih Nah berikut
ini dibasah alkohol dengan tisu lalu
dibersihkan tisun
nya Nah setelah
bersih nanti tinggal di ini sambil
diluruskan lagi ya dia akan potong jadi
motongnya nanti adalah ukuran 20 ya
ukuran 20 mili yau ujung ujung kabel
ujung kabel yang warna hitam ujung drop
Core ya patokan kita ujung drop
coreah jadi ujung drop Core yang warna
hitam taruh di nomor 20 lalu dijepit dan
dipotong dengan pelan-pelan jangan Seca
paksa takut dia Pecah Nah kalau sudah
dipastikan dia sudah terputus dan
terpotong nah dibuka sambil dipegang itu
jangan dilepas
nah dan diaktifkanlah e mesin spliter
dengan menekan tombol power ada tombol
power di sana tekan 2 detik tahan nah
sampai dia tampil dan
standby kalau sudah aktif baru kita
mulai bisaah ini sudah aktif ya sudah
aktif kita buka
cover lalu kita Letakkan mendekati jarum
ingat mendekati jarum jangan lewat jarum
jangan terlalu jauh hanya mendekati saja
dan pastikan posisinya tidak bengkok ke
atas ke kiri atau ke samping Yang
penting dia harus lurus sejajar dengan
tengah-tengah jarum itu kalau sudah
yakin lalu dikunci pastikan terkunci
dengan baik berbunyi
klik drop aman berikutnya untuk
persiapan kabel
piktil pada P Ini ada Ini sisa pemakaian
orang kita buang saja kita potong yang
pertama adalah kita buang tubnya tu itu
adalah selang warna kuning dengan mulut
yang paling besar ya mulut yang paling
luar dari striper sekitar 4 centtian
jadi hanya menggunting saja bukan
ditarik memotong menggunting ya
Nah benang-benang yang ada di sini itu
kita bersihkan kita potong dengan
gunting n itu gunting
disiapkan terus ada dua tub di sini ya
Ada tub kuning dan tub putih tub kuning
ini yang bagian luar tub putih bagian
dalam nah ini ditahan yang bagian tuup
putihnya jadi jangan
dilepas kita akan kupas sedikit demi
sedikit tuup putihnya dengan mulut yang
nomor dua dari striper ingat mulut nomor
duanyaah tarik pelan-pelan lurusah
ambil lagi sedikit lagi sampai terkupas
sekitar 1 cent atau mendekati ujung kuku
kita ya nah ini sudah sudah aman Sudah
terkupas jadi Jangan dihabiskan itu tub
putihnya kuning patokannya at putih itu
sekitar satu Jempol ya atau satu
pegangan pegangan
jari terus dibersihkan e Coating dari
kabel ini yang pakai mulut yang paling
dalam Berarti ada tiga tahap dia ya
pakai mulut yang paling besar kupas tup
kuning putih mulut yang tengah dan yang
bersihkan Coating yang bagian dalam itu
dengan e mulut yang paling kecil juga
dari striper ini kalau sudah dibersihkan
dengan alkohol nah patokan pemotongan
itu berada pada posisi yang tup kuning
sama dengan yang tadi ukuran kita adalah
20 atau 2 cent jadi patokannya adalah
ujung warna kuning ke nomor 20 Nah kalau
sudah pastikan
sejajarutup lalu dirapikan ya pastikan
dirapi agar pemotongan bagus karena
hasil sambungan kalau pemotongan kita
tidak bagus pasti akan Jik
hasilnyaah ini lalu dipotong dan
didorong pisau dengan pelan-pelan sudah
buka Nah lalu kita masukkan dia sebelah
kanan dari sper karena drop Core sebelah
kiri berarti ini sebelah kanan sama
dengan yang tadi
mendekati jarum juga nah pastikan dia
tidak bengkok juga harus sejajar dengan
kabel sebelahnya
Oke posisi dimasukkan sudah yakin lalu
dikunci lagi
jalan
Nara posisi ini kalau miring dia pasti
gagal kita nyambung tidak mau nyambung
sudah yakin lalu ditutup
cover tutup cover dan SP mulai
mengerjakan penyambunganah ini bentuk
tampilan kita tadi kurang bersih ya
Oke kita lihat hasilnya target
penyambungan adalah maksimal
0,03 losnya ya Los
sambungan Nah di sini kita mendapatkan
angka 0,02 itu dia 0,02
berarti sudah layak ya layak untuk
dilanjutkan pekerjaan berikutnya Oke
kalau sudah tinggal kita ee meletakkan
itu slep ya meletakkan slep posisi ke
tengah dari sambungan itu dekatkan dulu
dekatkan dulu ke spliter Nah kalau sudah
dipegang dipegang Ya ditahan bukan
ditarik ditahan saja buka
cover yang dibuka adalah yang bagian
pikil yang warna kuning ya nah jadi yang
dipegang adalah yang dropor yang hitam
yang kuning yang dibuka pelan-pelan eah
nah jangan lupa dibuka pemanas terus
kita buka yang sebelah kiri yaitu drop
Core nah yang dipegang hanya kabel
dropor
saja piktil jangan karena takut dia
melenting dan putus ya jadi dekatkan
pelan-pelan pastikan letak slep di
tengahtengahah kalau sudah yakin
tinggal kita masukkan ke pemanasnya
pemanas nah ini ada pengunci di sebelah
kiri dan kanan jangan sampai terjepit
kabelnya Letakkan tengah-tengah
kalau sudah yakin tinggal
ditutup dan lampu dari apa aktif lampu
warna
merah nah terus nah ini Tinggal kita
tunggu selesai pemanasan Kalau sudah
tinggal kita tahap berikutnya adalah
tahap pengukuran ya dengan menggunakan
otdr Nah tergit kita adalah mengukur
panjang kabel dan redaman kabel yang
kita pakai untuk jaringan berikutnya
boleh menggunakan otdr ini Kebetulan
tarok
関連動画をさらに表示
Cara Membuat Kabel Straight (UTP/LAN) #tutorial #straight
How to Wire Up Ethernet Plugs the EASY WAY! (Cat5e / Cat6 RJ45 Pass Through Connectors)
Network Tools - CompTIA A+ 220-1101 - 2.8
Inserting a cable onto an ADMIRALTY Standard Nautical Chart
LKS SMK Information Network Cabling Tingkat Kota Jayapura Tahun 2023
Simple Salwar Cutting And Stitching Very Easy Method || salwar Cutting
5.0 / 5 (0 votes)