Fibra óptica - ONU em modo Bridge ou Router?
Summary
TLDRIn this informative video, Henrique Mariah explores the settings of an Optical Network Unit (ONU), commonly known as a modem, provided by internet service providers. He explains the ONU's role in converting fiber optic light signals into electrical impulses for devices. The video delves into two main operational modes: Router mode, where the ONU functions as a DHCP server and Bridge mode, which is preferred for specific configurations like port forwarding. Mariah advises on when to use each mode, highlighting the importance of understanding these settings for effective network management and access control.
Takeaways
- 😀 Henrique Mariah welcomes viewers to another video on his channel, focusing on the settings of the Optical Network Unit (ONU), commonly known as a modem.
- 🔌 The ONU's primary function is to convert the light signal from fiber-optic cables into electrical impulses that devices like computers, smartphones, and smart TVs can recognize.
- 🌐 The ONU can operate in two modes: as a router with DHCP (Dynamic Host Configuration Protocol) or in Bridge mode, which is used for specific configurations like port forwarding.
- 📺 In Router mode, the ONU acts like a router, receiving the fiber-optic cable, converting the signal, and providing internet access through Wi-Fi or Ethernet ports.
- 🔑 The ONU in Router mode uses PPPoE (Point-to-Point Protocol over Ethernet) for authentication and typically has a default gateway like 192.168.1.x, with a DHCP server providing IP addresses.
- 🚫 Some configurations, like port forwarding for cameras or DVRs, may not be possible with the ONU in Router mode due to provider restrictions.
- 🔄 If a second router is desired for more network management, it can be connected to the ONU via an Ethernet cable, with the new router set to DHCP client mode.
- 🌉 In Bridge mode, the ONU acts as a simple bridge, not performing any authentication or providing Wi-Fi, and is completely transparent to the network.
- 🛠️ Bridge mode is recommended for effective local network management, allowing for port forwarding and other configurations on a separate router.
- 🔒 The separate router in Bridge mode will authenticate with the provider, typically using PPPoE with a username and password, and will manage the local network's DHCP.
- 👋 The video concludes with an invitation for viewers to ask questions in the comments if they have any doubts about the ONU in Router or Bridge mode.
Q & A
What is the main function of an Optical Network Unit (ONU)?
-The main function of an ONU is to convert the optical signal from the fiber optic cable into electrical pulses, which are recognized by devices such as computers, smartphones, smart TVs, and other network-connected devices.
What are the two basic modes of operation for an ONU?
-An ONU can operate in two basic modes: as a router with DHCP server functionality, or in Bridge mode, which is used for specific configurations and port forwarding.
What is the difference between Router mode and Bridge mode in an ONU?
-In Router mode, the ONU acts as a router, providing DHCP services and managing the internal network. In Bridge mode, the ONU acts as a transparent bridge between the fiber optic network and the internal network, without performing NAT or DHCP services.
Why might someone choose to use Bridge mode for their ONU?
-Bridge mode is chosen when a user wants to manage their network more effectively, allowing for specific configurations such as port forwarding for devices like cameras or gaming consoles.
What is DHCP and why is it used in an ONU's Router mode?
-DHCP (Dynamic Host Configuration Protocol) is used to automatically assign IP addresses to devices on a network. In an ONU's Router mode, it is used to manage and distribute IP addresses to devices connecting to the network.
What is the typical IP range provided by an ONU's DHCP server in Router mode?
-The typical IP range provided by an ONU's DHCP server in Router mode is in the 192.168.x.x range, but it can vary depending on the provider and configuration.
How does an ONU in Bridge mode differ from one in Router mode regarding network management?
-In Bridge mode, the ONU does not perform NAT or DHCP services and is transparent to the network, allowing a separate router to manage these functions. In Router mode, the ONU itself manages network addresses and provides internet access.
What is the purpose of the fiber optic cable mentioned in the script?
-The fiber optic cable is used to deliver the optical signal to the ONU, which then converts it into electrical signals for use by network devices.
What is the potential issue with using an ONU in Router mode for port forwarding?
-The potential issue is that the ONU may not allow port forwarding due to the policies and rules set by the service provider, which could limit access to certain devices or services on the network.
How can a user connect a second router to an ONU in Router mode?
-A user can connect a second router by running an Ethernet cable from the ONU's LAN port to the second router's WAN port, configuring the second router to obtain an IP address from the ONU's DHCP server.
What is the recommendation for users who want to manage their network more effectively?
-For users who want to manage their network more effectively, it is recommended to use the ONU in Bridge mode and connect a separate router that can handle port forwarding and other advanced network configurations.
Outlines
😀 Understanding Optical Network Unit (ONT) Settings
This paragraph introduces the topic of the video, which is about studying the settings of an Optical Network Unit (ONT), commonly known as a modem. The ONT is responsible for converting optical signals from fiber optic cables into electrical pulses that can be recognized by devices such as computers, smartphones, and smart TVs. The video will explore how the ONT can operate in two modes: as a router with DHCP server functionality or in bridge mode for specific configurations. The speaker encourages viewers to subscribe, share, and like the video to support the channel and promises to continue providing valuable content.
🔌 Exploring ONT Modes: Router and Bridge
The second paragraph delves into the two primary modes of operation for an Optical Network Unit (ONT): router mode and bridge mode. In router mode, the ONT acts as a DHCP server, providing IP addresses to devices on the network, and performs network address translation (NAT). This mode is suitable for users who do not require advanced network management features. In contrast, bridge mode is recommended for users who want to manage their network more effectively, such as setting up port forwarding for cameras or gaming consoles. The speaker also mentions that some configurations cannot be made directly on the ONT due to provider restrictions, and that in bridge mode, the ONT is transparent to the network, allowing for more control over network settings.
Mindmap
Keywords
💡Fiber Optic
💡ONT (Optical Network Terminal)
💡Modem
💡DHCP (Dynamic Host Configuration Protocol)
💡Router
💡NAT (Network Address Translation)
💡Bridge Mode
💡Port Forwarding
💡Ethernet
💡Wi-Fi
💡ISP (Internet Service Provider)
Highlights
Introduction to the video by Henrique Mariah, discussing the settings of the Optical Network Unit (ONU).
Explanation of ONU's main function: converting fiber optic light signals into electrical impulses.
Modes of operation for ONUs: as a router, DHCP server, or in Bridge mode.
Call to action for subscribers to like and share the video for more content.
Description of ONUs provided by internet service providers to convert fiber optic signals to electrical signals.
Technical details on how ONUs work with fiber optic cables and electrical signals.
Different scenarios for ONU configurations: as a router with DHCP or in Bridge mode for specific configurations.
Explaining the router mode where the ONU acts as a DHCP server providing IP addresses.
The limitations of ONU in router mode for port forwarding and specific configurations due to ISP restrictions.
How to connect a second router to the ONU for more network management options.
The Bridge mode of ONU, acting as a transparent bridge between fiber optic and electrical networks.
Advantages of using Bridge mode for effective local network management and port forwarding.
Technical setup for connecting a router in Bridge mode with the ONU.
The importance of understanding ISP policies and restrictions when configuring ONUs.
Conclusion of the video with an invitation for questions and comments from the viewers.
Transcripts
E aí
[Música]
e fala pessoal tudo bem com vocês me
chamo Henrique Mariah e sejam bem vindos
a mais um vídeo aqui no canal pessoal no
vídeo de hoje a gente vai estudar um
pouquinho sobre as configurações da uniu
na unidade de rede óptica um equipamento
aí tivemos que é seu modem que todos os
provedores e operadoras aí eles entregam
na sua residência Quando Ela utiliza uma
conexão de fibra óptica homem eo pessoal
com o NT ela tem a principal é a
principal função de converter o sinal de
luz da fibra óptica né em impulsos
elétricos né que são os cursos
reconhecidos pelo computador pelo
celular né via wi-fi pelas pela TV Smart
TV e para mim vai tá ok e assim ó em U
né ou aonde ter ele ela pode operar
basicamente de duas formas em volta né
como se fosse um roteador já era uma
rede ali um servidor DHCP ou em modo
ponto que não é o famoso modo Bridge né
que é mais indicado aí para quando você
deseja realizar algum relacionamento de
porta alguma configuração específica é
mas antes de a gente iniciar aqui no
conteúdo pessoal eu penso que você se
inscreva aqui no canal compartilhe esse
vídeo né deixe sua curtida e para que a
gente continue trazendo conteúdos como
esse tá certo vamos lá pro nosso
conteúdo galera pessoal vem um só quando
a gente tá tratando aí de
fibra óptica aqui ó é as operadoras nos
fornecem as famosas com io ou NT tá
perto que são os equipamentos
responsáveis pela conversão do sinal off
como eu falei tá certo converter o sinal
outro sinal de luz que chega na fibra
óptica para Sinais para Sinais elétricos
pulsos elétricos aí que são reconhecidos
pelos exatamente está certo o que muitos
não sabem pessoal é que os equipamentos
Não é esse tipo de equipamento ele pode
apertar aqui modo ponte o modo oblíquo
ou modo volta né E a gente vai analisar
é em quais situações as configurações
são aplicadas vejamos vamos analisar
aqui esse primeiro cenário quando a
gente tem a Wii U P o modo holter ou
seja lá o que era como se fosse de fato
um roteador né ela recebe aqui o cabo
drop you que a gente medir cabo drop né
o cabo figura 8 com o sinal de fibra
óptica sinal de luz realiza a conversão
para pulsos elétricos Tá certo e ela tem
aqui ó como forma de autenticação o PP o
e né É o protocolo ponta a ponta aí no
utilizando o padrão ethernet ou DHCP
isso vai depender muito da rede aí do
seu provedor Tá OK ela tem ativado o que
que é dela né geralmente esse daqui ó
92.68.1 como se fosse um roteador e tem
um servidor DHCP habilitado né
entregando aqui uma faixa de IP
geralmente são em 99 peixes acerta
emprego de classes e só que só libera
apenas 99 na Regina DHCP por exemplo a
gente tem o grito é que tem um
92.68.1 conta 2.1.34 5 e 6 né como
exemplo que seriam liberadas que o DHCP
esse pessoal eles estariam as por e
dispositivos conectarem aqui via wi-fi
ou mesmo em alguma porta de rede lá aqui
dessa menina é que disponibilizado
acesso à internet tá ok então a uniu ela
funcionaria basicamente como um roteador
e aqui pessoal também realizada e o Mack
né
Naty quer o que a tradução é dos
endereços IPS né que são entregues aqui
pelo provedor né seria público ou
privado para os empregos da rede interna
então se você quer fazer um
relacionamento de porta para uma câmera
na câmera né o DVR para um jogo talvez
essa configuração não seja mais indicada
Por que você não vai conseguir fazer
isso na uniu devido às políticas aí as
regras da sua operadora na sua operador
que da sua operadora que não possibilita
acesso o equipamento e se você quiser
configurar um segundo roteador conectado
nessa medio né você vai puxar um cabo da
lâmpada no cabo UTP cabo metálico da lan
para o ano do seu roteador autenticar o
roteador como DHCP naquele dia vai
receber uma rede aí que tem acesso a
internet e ele vai ter um jeito é
diferencial nenhum e também E aí então
você fica com dois dedos servidores DHCP
na rede tá certo e esse roteador aqui a
tp-link no caso ele não irá gerenciar
muita coisa na rede né quem vai fazer
tudo gerenciamento e autenticação e
acesso à internet será um nesse caso
aqui correndo em modo router pessoal
quando a gente vem aqui para o em modo
Bridge modo ponte a gente já tem uma
situação amor mas simples digamos assim
a uniu recebe a fibra aqui ó ao sinal de
luz tá certo dia cabo drop normalmente
na porta com porém ela não realiza
autenticação de uma você não tem acesso
a internet né nem vai ter rede wi-fi
aqui vai ficar mente apenas uma ponte né
entre o sinal aqui entre a rede de fibra
que a rede metálica aqui aí é de
impulsos elétricos que vai para o seu
roteador Tá certo nesse caso é um indo
para escola não realizou Naty ela não é
teu jeito habilitar e não libera um
servidor DHCP também que ela fica
transparente na rede mas totalmente
transparente que em caso de
redirecionamento de portas aqui no
roteador É né você não vai ter problema
em relação a new ai como ela tá só como
uma ponte entre duas redes aqui a rede
Externa rede interna e rede de fibra e a
rede aqui com pulsos elétricos que vai
para o roteador autenticação do seu
roteador pessoal já vai ser geralmente
aqui a pouco PVP Way ou seja com usuário
e senha que o seu provedor vai conhecer
aí você vai ter o beijo do seu roteador
Tá certo nave 2.6 8.0.1 e no servidor
DHCP habilitado né onde você vai estar
atendo a liberação dos presos pelos
dispositivos que vão conectar na sua
rede interna esse tipo de conexão aqui
pessoal com em modo Bridge modo ponte né
Ela é mais indicado para quando você
deseja fazer um gerenciamento mais
efetivo da sua rede local da sua rede
interna onde você pode fazer
redirecionamento de portas aqui nesse
roteador tá certo é para câmeras para
algum jogo específico aí no seu console
Xbox Play3 é Play3 play4 enfim né
algumas situações Você vai precisar
deixar sua em modo Bridge o que
gerenciar equipamento aqui ó viu a
operadora então algumas configurações
você não faz diretamente na nyu ou NT Tá
certo galera esse foi nosso vídeo de
hoje né Fala um pouquinho mais sobre o
ninho né em modo router e o em modo
Bridge né modo ponte qualquer dúvida é
só deixar aqui nos comentários que a
gente vai tá verificando mas a possível
Tá certo até a próxima tchau
[Música]
関連動画をさらに表示
Home Networking 101 - How to Hook It All Up!
Modem vs Router - What's the difference?
Optical Fiber - N10-008 CompTIA Network+ : 1.3
Konfigurasi DHCP Server dan DHCP Client pada Router Mikrotik RB 951Ui-2HnD
How to Make an Airtel Xstream Fiber Router for a WiFi range extender | Router Wifi Extender Settings
Computer Basics: Connecting to the Internet
5.0 / 5 (0 votes)