Skift stikkontakt - Sådan skifter du let din egen stikkontakt
Summary
TLDRIn this informative video, Brian from Greenline.dk guides viewers through the process of replacing an electrical socket. He emphasizes the importance of turning off the power supply before starting and suggests using a flathead screwdriver and a Phillips or star screwdriver for the job. Brian also recommends having a smartphone on hand to take pictures of the wiring for reference during reassembly. He demonstrates how to remove the old socket and its components, noting the need to loosen six screws and be cautious not to strip them. After removing the socket, he discusses the option to use either the old Fuga version or the new 'Ny Fuga' system, highlighting the benefits of the latter, such as easier painting and less hassle with the frame. Brian then proceeds to reassemble the socket using the old Softline frame, ensuring the power is off and using the pictures for guidance. He concludes by reminding viewers to replace components one-to-one, match the old socket's specifications, and always turn off the power before starting the job. Greenline.dk offers the necessary components with free shipping.
Takeaways
- 🛍️ Always purchase from Greenline.dk with free shipping.
- 👤 Introduction by Brian from Greenline, who will demonstrate how to replace a switch.
- ⚙️ Ensure to replace the switch with a corresponding new element, one-to-one, without making any other changes.
- ⚠️ Remember to turn off the power supply before starting the replacement process.
- 🌞 It's recommended to start the task early in the day to take advantage of daylight and avoid working in the dark.
- 🔩 Tools needed include a flat-head screwdriver, a cross-head or star screwdriver, and possibly a knife to remove paint.
- 📱 Having a smartphone on hand is useful for taking pictures of the wiring to help with reassembly.
- 🧰 Prepare all necessary items that can be purchased from Greenline.dk.
- 🔩 When removing the switch, use the appropriate screwdriver and be gentle to avoid damaging the surrounding area.
- 📸 Take photos from multiple angles to document the wiring and connections for reference during reassembly.
- 🔌 Ensure all wires are connected in the same manner as they were originally during reassembly.
- 🛠️ There are two methods for reassembling the switch: using the old Fuga version or the new 'Ny Fuga' system, both available at Greenline.dk.
- 🏠 The new 'Ny Fuga' system allows for the frame to be removed without disconnecting the switch, which is useful for painting or other modifications.
- 🔧 When reassembling, ensure the power is off to avoid electric shock and use daylight to make the process easier.
- 📝 Keep in mind to replace parts one-to-one, and do not change the configuration of the switch (e.g., from a non-grounded to a grounded switch).
- 🔄 Make sure to take pictures of the setup to ensure correct reassembly, and always turn off the power before starting.
Q & A
What is the main topic of the video?
-The main topic of the video is how to replace an electrical switch in a safe and efficient manner.
Who is the speaker in the video?
-The speaker in the video is Brian from Greenline.dk.
Why is it important to turn off the power before starting the replacement process?
-Turning off the power is crucial to prevent electrical shocks and ensure safety during the replacement of electrical components.
What tools does Brian recommend to have on hand for this task?
-Brian recommends having a flathead screwdriver, a Phillips or star screwdriver, a knife for cutting through paint, and a smartphone to take pictures for reference.
Why does Brian suggest taking pictures of the wiring?
-Taking pictures of the wiring helps to ensure that the wires can be reconnected in the same way after the switch has been replaced.
What is the benefit of using the 'New Fuga' system mentioned in the video?
-The 'New Fuga' system allows for the frame to be removed without disconnecting the wiring, making it easier to paint or perform other tasks without worrying about damaging the frame.
What is the significance of starting the task early in the day?
-Starting early in the day ensures that there is enough daylight to work with, reducing the risk of making mistakes due to poor visibility.
null
-null
Why is it important to replace the switch '1 to 1'?
-Replacing the switch '1 to 1' means that each component should be replaced with an identical new part, ensuring compatibility and proper functionality.
What does Brian suggest for dealing with paint around the frame?
-Brian suggests using a hobby knife to carefully cut along the edge of the frame to avoid tearing the wallpaper when removing the switch from the wall.
What is the advantage of using a 'Softline frame'?
-The Softline frame is compatible with the old Fuga version and can be easily installed in place of the old switch, providing a neat and clean look.
How does Brian ensure that the new switch is installed correctly?
-Brian ensures the new switch is installed correctly by referring to the pictures he took earlier, which show the exact wiring configuration.
What does Greenline.dk offer in terms of shipping?
-Greenline.dk offers free shipping on all orders, making it convenient for customers to purchase the necessary parts for their switch replacement.
Outlines
🛠️ Introduction to Switching a Light Switch - Greenline.dk
Brian from Greenline.dk introduces a tutorial on how to replace a light switch. He emphasizes the importance of turning off the power before starting and suggests doing the job early in the day with ample daylight. The necessary tools include a flat-head screwdriver, a cross-head or star screwdriver, a knife for removing paint, and a smartphone to take pictures of the wiring for later reference. Brian also mentions that all the items needed for the task can be purchased on Greenline.dk with free shipping. The process involves removing the old switch, taking photos of the wiring, and loosening six screws to detach the switch from the wall. The tutorial also touches on the different methods of reassembling the switch using either the old Fuga version or the new 'Ny Fuga' system, which allows for easier painting or maintenance without disassembling the switch.
🔩 Assembling the Light Switch and Frame - Greenline.dk
The second paragraph continues with Brian assembling the light switch and frame. He starts by placing the neutral switch at the bottom of the frame and then adds a one-pole switch in the middle. A correspondence switch is then placed at the top. Brian uses his smartphone to refer to the pictures he took earlier to ensure the wiring is connected correctly. He stresses the importance of safety by turning off the power and working in daylight. Once the wiring is reconnected, he proceeds to screw the switch back into place, ensuring a snug fit against the wall. Finally, he replaces the cover plates, updating the switch from an old gray to a new white, enhancing the aesthetic of the room. The summary concludes with a reminder to replace components one-to-one, match the number of terminals, take pictures for reassembly, and always turn off the power for safety. Greenline.dk is highlighted as a source for all necessary items with free shipping included.
Mindmap
Keywords
💡Greenline.dk
💡Switch replacement
💡Correspondence breaker
💡Turn off the power
💡Screwdriver
💡Smartphone
💡Softline frame
💡Technical mounting frame
💡Electrical wiring
💡Safety
💡1-pole breaker
Highlights
Greenline.dk always offers free shipping
Brian from Greenline demonstrates how to replace a light switch
There is a correspondence switch, a switch and a ground switch involved
Important to remember to turn off the power before starting
Start early in the day to have daylight and time to work
Need a small flathead screwdriver and possibly a crosshead or Phillips screwdriver
Having a smartphone on hand is a good idea
Use a hobby knife to carefully remove paint around the frame
All the necessary items for the switch replacement can be purchased at Greenline.dk with free shipping
Use a flathead screwdriver to remove the switch from the wall
Loosening the 6 screws holding the switch module in place
Take photos of the wiring connections to ensure proper reassembly
Disconnecting and removing the old switch module
Two options for reassembling - using the old Fuga version or the new Fuga system
The new Fuga system allows the frame to be removed without disconnecting the wiring
Choose to use the old Softline frame in this case
Assemble the frame and components starting with the ground switch at the bottom
Place the correspondence switch at the top
Refer to the photos to reconnect the wiring exactly as it was
Ensure the power is off before working with the wiring to avoid shock
Reassemble the switch by screwing it back into place
Ensure the frame is flush against the wall when tightening the screws
Replace the switch cover to complete the update
Remember to replace components 1-to-1 without changing the wiring configuration
Taking photos ensures correct reassembly and helps avoid mistakes
Always turn off the power before starting the replacement process
Greenline.dk offers all the necessary items with free shipping
Transcripts
Greenline.dk altid med gratis fragt.
Jeg er Brian fra Greenline.
Jeg vil vise, hvordan man udskifter sådan en stikkontakt som den her.
Der er en korrespondance afbryder, en afbryder og en stikkontakt u/jord...
(der mangler det tredje ben).
Jeg må godt skifte den her..."1 til 1".
Det vil sige, jeg må erstatte præcis det, der står her med nye elementer,
andet må jeg ikke gøre.
Der er en ting, der er rigtig vigtigt,
før du går igang.
Det står her: "Husk at slukke for strømmen".
(Julie slukker for strømmen. Lyd "klik").
Gå i gang så tidligt på dagen som muligt, så du har dagslyset,
og tiden for dig.
så du ikke lige pludselig skal sidde med pandelygte og mørke,
og rode dig frem herinde bagved.
Det typiske du skal bruge er en lille skruetrækker med lige kærv,
og så skal du typisk bruge en krydskærv eller stjernekærv "som denne her"
- også den lille af dem.
Så er det en god ide at have en telefon klar.
Det vender jeg tilbage med lige om lidt.
Og så en kniv som denne her, fordi
der kan faktisk godt kan være en del maling omkring rammerne.
Så det er også en god ide.
Så skal du selvfølgelig have gjort de ting klar,
som du kan købe på Greenline.dk
- altid med gratis fragt.
Nu vil jeg vise, hvordan man skifter stikkontakten.
(Julie slukker for stømmen - lyd "klik"
Så har vi slukket for strømmen.
Nu går jeg videre med, at gøre den her klar.
Den her har været malet rundt omkring.
Den gode ide er: Tag en hobbykniv og skær langs kanten.
Så du ikke får trukket tapetet med...
....når den skal tages fri fra væggen.
(lyd - "klik". Kniv foldes sammen)
Så tager man sin flade skruetrækker her....
ind imellem den øverste tangent...
(Lyd - "klik - klik")
...og vipper ud.
Det gør ikke noget, man bruger en lille smule "vold" her.
Fordi den skal jo ikke på igen.
(Lyd - "klik")
I det her tilfælde hvor jeg har 3,5 modul
altså...
1 modul
1 modul
og 1,5 modul her.
Så skal du have løsnet de 6 skruer, der sidder her.
Når man løsner dem....
bruger man typisk en stjerneskruetrækker,
Det kan også være den lige kærvede, afhængig af hvor gamle skruerne er.
Sådan... så har den løsnet sig fra væggen.
Hvis ikke den har løsnet sig nok, så...
skru lidt mere, men vær forsigtig med bare at skrue igennem.
Fordi så falder tingene fra hinanden inde bagved...
Det kan være en fordel at have dem igen, når den skal monteres igen.
Men i dette tilfælde hvor jeg skal have skiftes det hele, gør det ikke så meget.
Bare vi har den løs.
Så ser det sådan ud inde bagved.
Det er nu... det kan blive en lille smule uoverskueligt.
Derfor er det jeg har en smartphone...
Jeg tager kameraet her, og tager et billede
Et godt stykke derfra....
og gerne fra flere vinkler.
Så jeg er fuldstændig sikker på, at jeg kan sætte ledningerne på...
på præcis samme måde igen.
Det der nu skal ske, det er,...
at vi selvfølgelig har husket at slukke for strømmen,
det gjorde vi, inden vi gik i gang.
Fordi det er dagslys, har jeg lys nok til, at kunne se, hvad jeg laver.
Så... igen. Gå igang tidligt, ellers bliver det her altså noget rod om aftenen.
Det næste jeg skal gøre nu her er at...
få skilt det hele fra hinanden, derfor er det vigtigt du har husket at slukket strømmen...
..og har taget dine billeder.
For alle "de her" ledninger skal i på samme måde igen.
når vi er færdige.
Men jeg starter simpelthen bare fra en ende af, jeg har jo taget mine billeder.
En god ide er at lade dem (ledningerne) have nogenlunde samme form, som de havde.
Så er det nemlig nemmere at se hvordan de skal sidde igen.
Sådan - så har jeg hele stikkontakten ude,
-og en ekstra lille ledning her, som skal gå imellem.
Nu når du skal montere stikkontakten igen, så har du faktisk to måder at gøre det på.
Den gamle Fuga version som den her...
Passer fint til f.eks. den her Softline ramme jeg har her,
som jeg kan sætte på i stedet for.
Men det helt nye system er det der hedder....
"Ny Fuga" som består af en: Teknisk monteringsramme
og en ramme bagefter.
Fordelen ved at bruge det her system er, når du er færdig
og stikkontakterne sidder i, kan rammen faktisk fjernes...
uden du behøver at skille det her ad.
Det vil sige når du skal male eller andet, så har du ikke balladen med den her ramme
som du skal passe på, eller sætte malertape på.
Den her ramme kan simpelthen skiftes fra den tekniske monterings ramme
Det hele ligger på Greenline.dk, og det passer til det nye Fuga.
Men det nye Fuga passer også til det gamle
Vi vælger lige i det her tilfælde, at skifte til den gamle softline ramme.
(Lyd - Julies hund gør og Julie siger "Ej!")
Nu kan jeg gå i gang med at montere rammen, og de forskellige enheder som jeg har købt.
Jeg starter med stikkontakten u/jord, som skal sidde her i bunden.
Så...var der en 1 polet afbryder, som den hedder, i midten.
Den sætter vi lige i rammen her.
(Brian bøvler lidt med montagen...4x hastighed)
Sådan.
Så var der en korrespondance afbryder som skulle i toppen.
(Lyd - "klik - klik")
Så er jeg klar til at finde kameraet frem, så jeg kan forbinde ledningerne præcis som før.
Så det vil jeg lige gøre.
Nu tager jeg mit kamera, og så kigger jeg simpelthen på billederne,
én efter en, hvordan jeg har forbundet ledningerne.
Så er jeg klar til at montere den igen.
Husk stadig... strømmen skal være slukket, når du går igang med det her,
for der er risiko for, at få stød når du rører de her ledere.
Lad vær med at tage nogle chancer, og sluk for strømmen,
og gå i gang tidligt så du har dagslyset med dig.
Nu vil jeg kigge billederne igennem, og så vil jeg sætte den her op på plads igen.
(Julie slukker for stømmen - lyd "klik")
(Ingen lyd - Brian roder med ledninger. 4 x hastighed)
Sådan.
Så har jeg forbundet alle mine ledninger, og det hele er klar til at blive monteret
på samme måde som før.
Altså med min skruetrækker... her.
Så er det bare at skrue den på plads igen.
Der skal nogen gange lige bøvles lidt med ledningerne inde bagved,
så de sætter sig som de var før.
Så er det bare at spænde til.
Når du strammer de her skruer er det en god ide lige at trykke en gang på skruetrækkeren
så du sikrer dig at hele rammen her, kommer ind mod væggen.
Lige giv den et tryk.
Inden du begynder at spænde, og så holde trykket.
Så kommer den lettest helt ind mod væggen.
Så mangler jeg bare at sætte tangenterne på.
Så er vi gået fra den gamle grå til den helt nye hvide kontakt, som vi har her.
(Lyd "klik - klik - klik")
Sådan. Så har vi fået opdateret stikontakterne med nye rammer og tangenter.
Det er blevet lidt pænere og hvidere her i stuen, fremfor de gamle grå - som den her.
Du må altså gerne skifte rammer og tangenter - og stikontakten.
Det er ikke noget problem.
Du skal bare huske at skifte "1 til 1".
Det vil sige...
Her hvor der ikke er jord på (der var ikke jord i forvejen) -
så må jeg ikke sætte en med jord på. Det vil sige, den skal være med kun 2 ben.
Den 1 polede afbryder må jeg gerne skifte til en 1 polet afbryder,
og korrespondanceafbryderen må jeg også skifte til det samme igen.
Husk at tage billeder. Så er du sikker på at montere det korrekt igen.
Og HUSK - at slukke for strømmen.
Greenline.dk - altid med gratis fragt.
関連動画をさらに表示
CÓMO INSTALAR UNA LLAVE DE ESCUADRA || TODO LO QUE NECESITAS SABER
Tödliche Steckdose? Der Test des Testers!
How To Hide TV Power Cord And Cables | Easy Way To Move An Outlet
FUNdamentals of woodturning: #1 The faceplate
I Discovered This Hidden Wiring Trick In An Old Forum!
How To Use USB Qflash BIOS Update Gigabyte B550 Aorus Elite AX V2
5.0 / 5 (0 votes)