The Basis for Your Lab Safety - Centrifuge Training and Maintenance

Eppendorf
13 Oct 201503:21

Summary

TLDRThis video script emphasizes the importance of regular maintenance for centrifuges to ensure optimal performance and safety. It outlines steps such as turning off the device, cleaning with neutral detergents, using test tube brushes, rinsing with water, disinfecting with isopropanol, lubricating with centrifuge lubricant, and inspecting for damage. It also highlights the role of professional inspection services and the availability of Endor rotor assurance plans for high lab safety standards.

Takeaways

  • 🔄 **Regular Maintenance**: It's crucial to perform routine maintenance on centrifuges for optimal performance and safety.
  • 🔌 **Power Off**: Always turn off the centrifuge before starting any maintenance procedures.
  • 🛠️ **Remove Rotor**: The first step in maintenance is to remove the centrifuge rotor.
  • 🧼 **Clean with Detergent**: Use neutral detergents to clean the centrifuge housing, rotor chamber, and equipment, especially if there's salt incrustation or chemical contamination.
  • 💧 **Rinse Thoroughly**: After cleaning, rinse all parts with water to remove detergent residues.
  • 🚫 **Avoid Submersion**: Do not submerge the rotor completely in water to prevent damage.
  • 🍸 **Use Isopropanol**: Apply 70% isopropanol or a similar disinfectant solution after rinsing for disinfection.
  • ⚙️ **Lubricate Parts**: Lubricate bucket grooves, pivots, rubber seals, and threads with centrifuge lubricant.
  • 🔍 **Inspect Rotor**: Closely inspect the rotor for cracks or corrosion, and replace it if damaged.
  • 👨‍🔧 **Professional Inspection**: For uncertain cases, contact a service technician for a professional inspection.
  • ⚠️ **Corrosion Risk**: Be aware that long-term exposure to aggressive chemicals can lead to rotor and bucket corrosion, which may compromise safety.
  • 📈 **Rotor Assurance Plans**: Consider rotor assurance plans for professional inspection and evaluation services.
  • 📚 **Further Information**: Refer to the maintenance poster, white paper number 14, and operating manuals for detailed maintenance instructions.

Q & A

  • What is the first step in starting a maintenance program for a centrifuge?

    -The first step in starting a maintenance program for a centrifuge is to turn it off and remove the centrifuge rotor.

  • What should be used to clean the centrifuge housing, rotor, chamber, and equipment?

    -Neutral detergents should be used to clean the centrifuge housing, rotor, chamber, and equipment, especially if salt incrustations or contamination with other aggressive chemicals are detected.

  • How should any residue on the centrifuge be removed?

    -Any residue should be wiped off to extend the life of the device.

  • What type of brushes are recommended for cleaning rotor BS stiff test tubes?

    -Brushes with end bristles and non-metallic tips are recommended for cleaning rotor BS stiff test tubes.

  • After cleaning with water, what disinfection solution can be applied to the rotors and centrifuge equipment?

    -After cleaning with water, 70% isopropanol or other diluted alcohol-based disinfection solutions can be used for disinfection.

  • What is used to lubricate bucket grooves, pivots, rubber seals, and threads?

    -A small amount of centrifuge lubricant should be applied to lubricate bucket grooves, pivots, rubber seals, and threads.

  • How should you inspect your rotor for damage?

    -Inspect your rotor closely for small cracks or corrosion. If any rotor damage is found, it is recommended to replace the rotor immediately.

  • What should you do if you are unsure about the safety of your centrifuge equipment?

    -If you are unsure about the safety of your equipment, contact your regional Eppendorf service technician for professional inspection services.

  • What can long-term exposure to aggressive chemicals cause on rotors and buckets?

    -Long-term exposure to aggressive chemicals can lead to corrosion on rotors and buckets, which may damage the rotor in a way that makes centrifugation unsafe.

  • What services do Endor rotor Assurance plans offer?

    -Endor rotor Assurance plans offer professional inspection and evaluation services for Endor rotors, using highly sophisticated B-scope equipment for inspections.

  • Where can further information about the maintenance of centrifuges be found?

    -Further information about the maintenance of centrifuges can be found in the maintenance of centrifuges poster, white paper number 14, and in the operating manuals for Eppendorf centrifuges.

Outlines

plate

このセクションは有料ユーザー限定です。 アクセスするには、アップグレードをお願いします。

今すぐアップグレード

Mindmap

plate

このセクションは有料ユーザー限定です。 アクセスするには、アップグレードをお願いします。

今すぐアップグレード

Keywords

plate

このセクションは有料ユーザー限定です。 アクセスするには、アップグレードをお願いします。

今すぐアップグレード

Highlights

plate

このセクションは有料ユーザー限定です。 アクセスするには、アップグレードをお願いします。

今すぐアップグレード

Transcripts

plate

このセクションは有料ユーザー限定です。 アクセスするには、アップグレードをお願いします。

今すぐアップグレード
Rate This

5.0 / 5 (0 votes)

関連タグ
Centrifuge CareLab MaintenanceEquipment SafetyChemical CleaningRoto InspectionCorrosion PreventionDisinfection TipsLubrication GuideProfessional ServicesLab Safety
英語で要約が必要ですか?