5 Consigli per smaltare correttamente la ceramica
Summary
TLDRIn this insightful video, the instructor shares five invaluable tips for achieving successful glaze application in ceramics. They emphasize the importance of correctly measuring glaze density, thoroughly mixing the glaze, meticulously cleaning the pieces, previewing the immersion process, and using wax resist on the feet or base. The instructor acknowledges the common struggles faced by students during this crucial stage and aims to provide practical guidance. With a compassionate tone, they reassure viewers that mistakes are normal and offer advice on rectifying glaze mishaps through additional practice. Overall, this concise yet comprehensive video promises to demystify the daunting task of glaze application.
Takeaways
- 👍 Measure the glaze density correctly by doing a test dip before glazing the final piece.
- 🥄 Mix the glaze thoroughly, using a utensil to incorporate any settled material at the bottom.
- ⚖️ Always sieve the glaze after mixing to remove any lumps.
- 🧽 Clean the piece thoroughly of any dust before glazing to avoid defects like pinholes.
- 🧪 Test the fit of the piece in the glazing container before dipping to ensure it can be submerged and turned easily.
- 🪣 Apply a resist wax to the feet or base of the piece for a professional, clean finish.
- 🔄 If the first glaze attempt fails, clean off the glaze, let the piece dry for 24 hours, and try again.
- 🏋️♀️ Glazing takes practice, so don't be discouraged by initial failures.
- ❓ The glazing process is often the most dramatic and challenging part for ceramics students.
- 📝 The video provides five key tips for successful glazing.
Q & A
What are the five main tips provided in the video for successful glaze application?
-The five main tips are: 1) Measure the correct density, 2) Mix the glaze thoroughly, 3) Clean the pieces properly before glazing, 4) Test the fit of the piece in the container before dipping, and 5) Apply wax resist on the feet or base.
How can you check if the glaze density is correct?
-You can check if the glaze density is correct by dipping a test piece with similar thickness and material as the actual piece you want to glaze. If the test piece dries immediately after removing it from the glaze, the density is correct.
Why is it important to sieve the glaze after mixing it?
-It is important to sieve the glaze after mixing it to remove any lumps or clumps that may have formed, as these can create defects in the final glaze.
What is the purpose of cleaning the piece thoroughly before glazing?
-Cleaning the piece thoroughly before glazing helps remove any dust or debris that could cause defects in the final glaze, such as small pinholes or blemishes.
Why is it recommended to test the fit of the piece in the glazing container before dipping?
-Testing the fit of the piece in the glazing container before dipping helps ensure that the piece can be properly rotated and immersed in the glaze without any issues, which can lead to glazing failures.
What is the purpose of applying wax resist on the feet or base of the piece?
-Applying wax resist on the feet or base of the piece helps achieve a professional and clean finish, preventing glaze from adhering to those areas during the glazing process.
What should you do if the glaze application is unsuccessful on the first try?
-If the glaze application is unsuccessful on the first try, you should not discard the piece. Instead, you should clean off the glaze, allow the piece to dry completely for at least 24 hours, and then try glazing it again.
How can you ensure a smooth and even application of the wax resist?
-To ensure a smooth and even application of the wax resist, you should use a dedicated brush that is only used for applying the wax resist, and apply it thoroughly to the feet or base of the piece.
Why is glazing often considered one of the most dramatic and challenging steps in ceramics?
-Glazing is often considered one of the most dramatic and challenging steps in ceramics because it is a crucial step that can make or break the final appearance and quality of the piece, and it requires a lot of practice and attention to detail to get right.
What is the recommended approach if you notice lumps or clumps in the glaze after mixing?
-If you notice lumps or clumps in the glaze after mixing, you should sieve the glaze to remove them before proceeding with the glazing process.
Outlines
🎥 5 Tips for Successful Glazing in Ceramics
The video provides 5 essential tips for achieving successful glazing in ceramics. 1) Measure the glaze density correctly by performing a pre-test immersion on a similar scrap piece. 2) Mix the glaze thoroughly and pass it through a sieve to avoid lumps. 3) Clean the pieces thoroughly to prevent defects like pinholes. 4) Test-fit the piece in the glazing container before immersion to ensure proper fit and rotation. 5) Apply a releasing wax to the bottom or foot of the piece for a professional finish. The host emphasizes practicing and not discarding pieces if glazing fails initially.
Mindmap
Keywords
💡Glazing
💡Density
💡Mixing
💡Sieving
💡Cleaning
💡Test Fitting
💡Wax Resist
💡Practice
💡Dramatic
💡Professional
Highlights
Five tips for properly glazing ceramic pieces.
Measure the glaze density correctly by testing on a small sample piece before glazing the main piece.
Mix the glaze thoroughly to prevent settling and strain it to remove lumps.
Clean the ceramic piece thoroughly to remove dust and prevent defects like pinholes in the glaze.
Test fit the piece in the glazing container before dipping to ensure proper clearance for rotating and immersing.
Apply wax resist to the foot or base of the piece to achieve a clean, professional look.
Don't worry if the first attempts at glazing fail, it takes practice. Clean off the glaze and try again after the piece fully dries.
The glazing stage is often the most dramatic and stressful for ceramics students.
Use a densimeter or follow instructions to determine the correct glaze density for your piece.
Mix the glaze thoroughly with a knife, fork, spoon, or whisk to incorporate any settled material at the bottom.
Clean the piece with a damp, well-wrung sponge to remove dust before glazing.
Test fitting the piece in the glazing container first can prevent glazing failures due to lack of space for rotating and dipping.
Use a dedicated brush to apply wax resist only to the foot or base area before glazing.
If the initial glazing attempt fails, clean off the glaze thoroughly, allow the piece to fully dry for at least 24 hours, then try glazing again.
With more practice, glazing results will improve.
Transcripts
Ciao a tutti e benvenuti sul mio canale
nel video di oggi voglio darti cinque
consigli per smaltare correttamente lo
so che il momento la smaltatura è un
momento drammatico normalmente da un
momento super drammatico per tutti i
miei allievi per cui quando arriva quel
momento lì iniziano tutti a sudare e a
stressarsi
so che quel momento è uno dei più
difficili in realtà in ceramica per cui
so quanto non sia semplice smaltare
correttamente quindi in questo video
voglio darti cinque consigli per
riuscire avere un buon risultato il
Primo consiglio che ti voglio dare e
misurare correttamente la densità c'è un
video su YouTube disponibile nel mio
canale in cui ti spiego come utilizzare
il tuo insieme quindi se non hai il
densimetro o se non sai qual è la
densità che ti serve per il tuo pezzo in
realtà è molto facile scoprire devi
sempre avere a disposizione prima di
smaltare un pezzettino da immergere come
prova per cui tenta che quel pezzettino
lì sia molto simile in quanto spessore e
in quanto materiale Ovviamente ha il
pezzo che devi smaltare quindi fai
sempre prima una prova nella quale
immergi questa rovina e tu devi proprio
vedere che quando togli si rovina dallo
smalto si deve asciugare immediatamente
Se non si asciuga subito vuol dire che
la densità non è corretta quindi è da
aumentare oppure da diminuire però
l'importante è quando tu smalti la
provina sia subito ben asciutto e che ci
sia almeno un millimetro di spessore o
più o meno di smalto sopra perché
altrimenti vuol dire che ce n'è troppo
poco
secondo consiglio mischia sempre molto
bene il tuo smalto perché tende sempre a
depositarsi in fondo per cui tu puoi
anche passare con un coltello con una
forchetta con un cucchiaio con il
frullino Non importa in realtà il modo
che utilizzi per mischiarlo ma
l'importante è mischiare quel deposito
che si crea in fondo Inoltre dopo averlo
mischiato devi sempre passarlo al
setaccio Ricordati di me perché
altrimenti ti ritroverai i grumi e
quelli sono illegali terzo consiglio
pulisci sempre molto bene tutte le tue
forme Dalla polvere quindi semplicemente
puoi farlo prendendo una spugna
bagnandola strizzandola molto bene e
pulendo il pezzo Dalla polvere questo ti
eviterà un sacco di difetti come ad
esempio quei piccoli buchini che si
presentano ogni tanto nello smalto
quarto consiglio questo ti sembrerà
veramente strano però è super utile
quindi Ascoltami prima di immergere il
tuo pezzo nel contenitore che hai scelto
fai la prova quando il contenitore è
vuoto Cosa vuol dire prendi il pezzo con
la pinza e fai finta di immergere per
capire se effettivamente questo pezzo ci
stava oppure no all'interno del
contenitore il più delle volte quando
vedo fallire qualche smaltatura e
proprio perché il pezzo non si riesce a
girare all'interno di questo contenitore
per cui Assicurati che il contenitore
sia adatto
Quinto consiglio passa la cera
risorgivante nei piedini dei tuoi
manufatti o nella base se non c'è un
piedino e così riuscirai ad ottenere un
risultato super professionale e molto
semplice prendi la cera riservate con un
pennello che utilizzi solo per quello
passi bene questa cera nel piedino
aspetti che si asciughi dopodiché
ti vengono super professionali super
puliti e non farai nessuna fatica
se le prime volte sbagli con lo smalto
Davvero non preoccuparti È normale
bisogna fare tanta tanta pratica se
sbagli non è da buttare via tutto il
pezzo basta pulirlo anche sotto l'acqua
Quindi togli tutto lo smalto pulisci
tutto il pezzo Lo fai asciugare bene
Quindi almeno 24 ore e dopo puoi
riprovarci quindi rituffare il tuo pezzo
più allenamento fai meglio verrà
ci vediamo al prossimo video Spero che i
miei video ti siano utili Spero che
questa lezione ti serva perché uno dei
momenti più drammatici è proprio questo
e ricevo tantissime domande proprio su
questo argomento qui quindi spero che
questo video ti sia utile Ci vediamo
alla prossima
関連動画をさらに表示
Smaltatura ceramica ad immersione, come smaltare la terracotta e la ceramica
Glazing Possibilities- 28 Different Approaches to Glazing Pottery!
Rifinitura a Secco - Scuola Ceramica Online
La Ceramica per Principianti in meno di 10 MINUTI. Video Tutorial sulla Ceramica - SUPER FACILE!!!
Melt In Your Mouth Glazed Donuts Recipe ( How to make the BEST Yeast Donuts ! ) Homemade Donuts
Иван Безбородов рассказывает и показывает.
5.0 / 5 (0 votes)