Testing and Tuning the NEW BETAFPV Air65

Summary

本视频介绍了Beta FPV最新推出的A65微型无人机。主播详细展示了A65的主要特性和组件，包括其轻巧的塑料框架、全合一飞行控制器、高性能的0702电机和C3微型相机。在飞行测试中，A65表现出色，无论是在角度模式还是自稳模式下都能提供稳定流畅的飞行体验。此外，视频还提供了Betaflight配置建议，帮助用户优化飞行体验。

Takeaways

• 😀 视频介绍了一款名为Beta FPV A65的新型迷你无人机，它非常小巧可爱。
• 🛠️ A65无人机采用了与Meteor 65相同的注塑成型塑料框架和螺旋桨保护罩，但配备了更轻巧的新型顶篷。
• 🔧 A65配备了Beta FPV全新的Air G4 4合1飞行控制器，具备G4处理器、双向DShot ESC和内置400m视频发射器。
• 🔗 无人机使用Beta FPV BT 2.0连接器供电，兼容BT 2.0和G&B A30连接器。
• 🔌 无人机底部有JST插头，附带USB适配器，方便连接飞行控制器进行USB通信。
• 📶 无人机内置16兆字节的黑匣子芯片，用于记录飞行数据，方便调校和分析。
• 🚀 A65使用的是0702 23000KV的微型电机，虽然体积小，但性能足够，还有27000KV版本供选择。
• 📷 无人机配备了Beta FPV C3微型摄像机，具有1200电视线和4:3的宽高比，可切换PAL和NTSC模式。
• 🔋 无人机重量轻，仅17.2克，搭载260mAh电池飞行时间约4分钟，300mAh电池则为5分钟。
• 🛰️ 视频还提供了Betaflight配置建议，包括调整PID参数和动态怠速设置，以改善飞行体验。
• 📡 VTX输出功率测试显示，不同Raceband设置下输出功率有显著差异，Raceband 1下最大输出功率超过600mW。

Q & A

视频中介绍的无人机是什么型号？

视频中介绍的无人机是Beta FPV A65型号。

Beta FPV A65无人机的框架材质是什么？

Beta FPV A65无人机的框架使用了注塑成型的塑料材质。

A65无人机的飞行控制器有哪些特点？

A65无人机的飞行控制器是全新的Air G4 4合1飞行控制器，具备G4处理器、双向DShot ESC，并内置400m视频发射器。

Beta FPV A65无人机的电池接口是什么类型？

Beta FPV A65无人机使用的是Beta FPV BT 2.0连接器，也兼容G&B A30连接器。

A65无人机的摄像头有哪些特性？

A65无人机的摄像头是Beta FPV C3微型摄像头，具有1200电视线、4:3的宽高比，并可切换PAL和NTSC制式。

Beta FPV A65无人机的重量是多少？

Beta FPV A65无人机仅机身的重量是17.2克，加上260mAh电池后重量为24.3克，使用300mAh电池则为25.5克。

视频中提到的Betaflight配置有哪些特点？

Betaflight配置包括G4处理器、8K和4K的PIT Loop频率、永久启用的Air Mode、OSD启用以及180°的启动角度。

视频作者对A65无人机的飞行体验有何评价？

视频作者认为A65无人机的飞行体验非常好，无论是在角度模式还是Acro模式下，都表现出良好的响应性和控制性。

Beta FPV A65无人机的VTX输出功率如何？

Beta FPV A65无人机的VTX在不同设置下有不同输出功率，例如25M设置在Raceband 1下实际输出约200mW，在Raceband 8下则降低。

视频作者对A65无人机的哪些方面提出了改进建议？

视频作者建议将Express LRS接收器集成到飞行控制器板上，以减少重量并使无人机更加紧凑。

A65无人机适合哪些用户群体？

A65无人机适合作为初学者的首架无人机，因为它小巧、轻便、易于飞行；同时也适合经验丰富的飞行员作为即开即用的微型无人机。

Outlines

00:00

🤖 测评Beta FPV A65无人机

本段介绍了Beta FPV A65无人机的开箱和初步印象。A65以其小巧的尺寸和轻量级设计受到关注，具有与Meteor 65相同的注塑成型塑料框架和螺旋桨保护装置，但配备了更轻巧的机盖和新的全合一飞行控制器。Beta FPV的Air G4 4合1飞行控制器集成了G4处理器、双向DShot ESC和内置400m视频发射器。此外，提到了使用ELRS接收器和Beta FPV BT 2.0连接器，以及通过USB适配器进行连接的便利性。还强调了16MB的黑匣子芯片，这是Beta FPV飞行控制器中首次包含的功能。

05:01

🛠️ Beta FPV A65的Betaflight配置和调整

这一段深入探讨了Beta FPV A65的Betaflight配置。提到了使用Betaflight 4.5版本，以及G4处理器支持的8K和4K pit loop频率。配置中包括了永久启用的Air模式、OSD、180°的启动角度和自定义板载对齐。在调整方面，提到了D和PI增益的设置，动态阻尼和Pitch跟踪的调整，以及动态怠速的设定，以改善小无人机的飞行性能。

10:02

📊 A65飞行测试和Betaflight调整

本段描述了A65的飞行测试和Betaflight调整。测试者使用了260mAh和300mAh的Beta FPV Lava 1S电池，并讨论了两种电池下的飞行时间。提到了使用不同电池时无人机的飞行感受，包括响应速度和控制难度。此外，还讨论了摄像头的性能，包括在不同光照条件下的表现和VTX的输出功率。最后，提供了Betaflight调整的建议，包括滤波器设置和PID配置，以改善无人机的响应和稳定性。

15:03

🔍 VTX输出功率测试

这一段专注于VTX的输出功率测试。测试者使用了一个真正的RMS功率计来测量不同设置下VTX的输出功率。测试了25mW、200mW和400mW的设置，并在不同的Raceband频率下观察了输出功率的变化。结果显示，Raceband 1在400mW设置下提供了超过600mW的输出功率，而在Raceband 8下则降至约270mW。这表明VTX的输出功率与设置和频率有关。

20:03

👍 Beta FPV A65的综合评价

最后一段是对Beta FPV A65的综合评价。测试者总结了无人机的优点，包括轻巧耐用的框架、高性能的0702电机、轻质的螺旋桨和机盖，以及功能丰富的Air G4飞行控制器。提到了无人机适合初学者和经验丰富的飞行员，因为它易于飞行且具有高级功能。唯一的建议是将ELRS接收器集成到飞行控制器上，以减轻重量并简化设计。最后，提供了购买链接，并鼓励观众通过这些链接购买以支持频道。

Keywords

💡无人机

无人机，即无人驾驶飞机，是一种无需飞行员在机舱内操作的飞行器。在视频中，无人机特指一种小型的、用于娱乐或竞技的飞行器，主要围绕Beta FPV A65这款新型无人机进行介绍，它是视频的核心主题。

💡Beta FPV A65

Beta FPV A65是视频中讨论的新型无人机型号，以其小巧、轻便和高性能为特点。它代表了视频的主要讨论对象，展示了其特性和飞行表现。

💡飞行控制器

飞行控制器是无人机中的核心组件，负责处理飞行数据和控制无人机的飞行动作。视频中提到的Air G4 4合1飞行控制器，集成了多种功能，是Beta FPV A65无人机的关键组件之一。

💡ESC

ESC是电子调速器（Electronic Speed Controller）的缩写，它控制无人机电机的转速，从而影响无人机的飞行状态。视频中提到了Blue J ESC，支持双向DShot协议，是Beta FPV A65无人机的一部分。

💡VTX

VTX是视频发射器（Video Transmitter）的缩写，它负责将无人机摄像头捕获的图像信号无线传输给飞手的眼镜或监视器。视频中Beta FPV A65无人机配备了内置400m视频发射器。

💡黑盒

黑盒在无人机领域指的是飞行数据记录器，用于记录飞行过程中的各种参数，便于事后分析和调整。视频中提到Air G4飞行控制器内置了16兆的黑盒芯片，是其一大亮点。

💡电机

电机是无人机的动力来源，通过电机的转动带动螺旋桨产生升力。视频中Beta FPV A65使用的是0702型号、23000KV的小型电机，展示了其轻量化设计。

💡Betaflight

Betaflight是一个流行的无人机飞行控制系统软件，用于配置和调整无人机的飞行参数。视频中提到了Betaflight 4.5版本，用于设置和优化Beta FPV A65无人机的飞行性能。

💡PID调参

PID调参是指调整无人机飞行控制器中的PID（比例-积分-微分）参数，以优化无人机的飞行稳定性和响应性。视频中提到了对Beta FPV A65无人机进行PID调参的过程。

💡摄像头

摄像头是无人机上用于捕捉图像的设备，对于FPV（第一人称视角）飞行尤为重要。视频中Beta FPV A65配备了C3微型摄像头，具有1200电视线和43宽屏比例，提供了良好的图像质量。

💡ELRS

ELRS是Express LRS的缩写，是一种用于无人机的高性能无线通信系统，用于传输图像和控制信号。视频中提到了ELRS接收器，作为Beta FPV A65无人机的一部分，用于接收控制信号。

Highlights

介绍了全新的Beta FPV A65无人机，这是一款非常小巧的无人机。

Beta FPV A65拥有与Meteor 65相同的注塑成型塑料框架和螺旋桨保护装置，但配备了更轻巧的顶篷。

A65配备了新的一体化飞行控制器Air G4 4合1，内置G4处理器和400m视频发射器。

Beta FPV A65没有内置接收器，需要使用外部接收器，如ELRS接收器。

A65的电源连接使用Beta FPV BT 2.0连接器，兼容BT 2.0和G&B A30连接器。

A65具有16兆字节的黑匣子芯片，与Beta FPV以往的飞行控制器相比是一个显著改进。

A65使用的是0702 23000KV微型电机，虽然体积小但性能出色。

A65的重量仅为17.2克，加上电池后重量分别为24.3克或25.5克。

Betaflight配置包括G4处理器、双向Dshot、OSD启用和永久启用的Air模式。

A65的自定义PID调整，包括提高主倍增器和调整动态怠速设置。

测试了260mAh和300mAh Beta FPV Lava 1S电池，分别提供了约4分钟和5分钟的飞行时间。

A65的飞行体验非常好，无论是在角度模式还是Acro模式下。

Beta FPV C3微型相机提供了1200TV线和43宽高比的高质量图像。

A65的VTX输出功率测试显示在不同Raceband设置下有显著差异。

A65适合作为初学者的首架FPV无人机，因为它易于飞行且价格合理。

对于有经验的飞行员，A65也是一个完美的即开即用微型无人机。

建议将ELRS接收器集成到飞行控制器上，以减轻重量并简化设计。

Beta FPV A65是一个接近完美的微型无人机，适合各种飞行者。

Transcripts

oh he's so tiny hi there everyone today

we are going to be taking a look at

probably the cutest little drone that

ever did drone the brand new beta fpv

a65 in this video I'm going to be taking

you through all of the features and

components of this little drone on the

bench we're going to be taking it for a

fly and I'm going to be giving you my

thoughts and recommendations on the

betaflight tune and on the Drone overall

it's a lot to cover one video so let's

not waste any more time let's dive right

into it if at any point during this

video you want to check out the pricing

and availability of this little guy then

all the links you need are down in the

video description and if you control

click on them you can listen to me

finish this review while you check out

all that information if you love all

things tiny whoops make sure you like

And subscribe to the channel because I'm

going to be testing out a whole bunch of

different tiny whoop Motors and props

over the next few weeks to find the

ultimate drivetrain for your next tiny

whoop DIY build you don't want to miss

out hit that like And subscribe button

all right let's start by taking a look

at this little guy on the bench and the

a65 shares the same injection molded

plastic frame and prop guards as the

meteor 65 but it does have a different

canopy the a65 has this smaller lighter

weight canopy it's got a little hole for

the VTX whip antenna and it's got these

four holes here to adjust the camera up

tilt so if you move this screw forward

that'll pull the canopy back and you can

get higher up tilt the a65 has a new

all-in-one flight controller from BET to

fpv this is their air G4 4 in1 and it's

got everything you would expect it's got

a G4 processor it's got um blue J on the

ESC so you can use bidirectional dshot

and it's got a built-in 400 m video

transmitter on the board as far as I can

tell there's no builtin receiver on this

board so you're going to use a separate

receiver and here I've got the elrs

receiver so this is an little serial

elrs receiver with a chip style antenna

and it's just taped on top of the board

there in terms of power connection we've

got the uh beta fpv BT 2.0 connector

here and that obviously supports both BT

2.0 batteries from beta fpv but also

anything with the g&b a30 connector will

also fit because they have the same pin

diameter and the same plug shape so yeah

bt2.0 or gnb a30 on the bottom of the

board we have this little jst plug here

and the S65 comes with this little USB

adapter which is really neat and helps

save a little bit of weight you can just

plug that in whenever you need to

connect via USB to the flight controller

and then you have this little USBC

breakout board and it's super convenient

cuz you can actually have the Drone sat

flat on the bench and the USB cable is

nowhere near the props which means that

you know if you need to test the motors

or whatever um stick a finger on top of

the Drone you can test the motors it's

nice and safe and you're not going to

get anything caught in the uh in the USB

cable so that's nice one of the really

neat features on this board which we're

going to talk about a bit later is that

it has a 16 megabyte blackbox chip on it

so beta fpv in the past have often not

included blackbox on their flight

controllers it's really nice to see that

this air G4 has that

included the motors are

0702 23,000 KV so these are really tiny

Motors and a modest KV but we'll see how

it performs in the flight test but

certainly um these aren't the largest

Motors that you would fit on something

like a 65 mm but also this drone is very

very light so keeping that motor size

down also helps keep the weight down the

camera on the S65 is the beta fpv C3

micro camera and this has 1200 TV lines

43 aspect ratio and it's switchable from

pal to ntsc depending on what you prefer

to use in your goggles speaking of

Weights let's get some for this little

guy so just the drone on its own comes

in at 17.2 G if we add the 260 Mah lava

pack that brings it up to 24.3 or you

can run the slightly larger 300 Mah lava

pack and that brings it up to 25.5 G so

here's the beta flight configuration for

the S65 we're going to start in the

configuration tab and just have a look

and see what beta fpv have done with the

custom config on this drone we're

running betaf flight 4.5 which is great

so we're on the latest version of

betaflight and we are running a G4

processor so we should have 8K and 4K

pit Loop frequency yep accelerometer is

active obviously for angle mode and we

have air mode permanently enabled OSD

enabled that's all fine and normal

arming angle is set to 180° so the Drone

is always going to be able to arm that's

good to see and we've got a custom board

alignment that's obviously for the uh G4

a AO FC that's on this drone if we go

down we've got dshop Beacon

configuration Beacon tone I always like

to set that to three I think it's easier

to hear and then we have all the other

beep set correctly so we will save and

reboot that jumping now into the pit

tuning tab

and so we got a custom pigum which is

nice to see so theyve put some effort in

there um D gains and p&i gains are both

set to

1.15 that doesn't make much sense when

you've also moved the master multiplier

so um what we can do is just increase

the master multiplier by about 15% or so

and that will be effectively exactly the

same set those back to

one state response is on zero so we got

no feed forward I would suggest that we

want a bit of feed forward to reduce the

delay in the pit controller Dynamic

damping off that's fine and Pitch

tracking 1.1 so okay so we need a little

bit more gain on the pitch axis than

roll which makes sense because the

battery is orientated lengthways on this

drone feed forward

settings these all look

sensible and dynamic damping I mean

these set settings are wrong but we're

not using Dynamic damping anyway we

always set advance to zero because we

don't ever want any advance on Dynamic

damping um we have no Dynamic idle set I

would definitely want to set a dynamic

idle for any small drone it does help

with prop wash particularly if you're

flying fast in Acro mode so I'm going to

set that to 50 to begin with and we'll

see how that

goes for these really tiny drones

sometimes you need more Dynamic idle but

should be absolutely fine to begin

with and everything else looks totally

sensible which is really nice to see

okay jumping into the receiver tab

that's obviously all set up for Express

lrs and is correct and

working we don't have any Telemetry

coming back from the from the Drone so

we should probably enable that so that

we can get battery voltage back from the

Drone to the radio we jump into modes

um these are just my custom modes and

Motors we have bidirectional dshot

enabled fantastic and dynamic idle

obviously is now set and 12 poles on our

Motors black

box thank you beta fpv 16 megabytes of

onboard blackbox storage that's just

fantastic that means we can tune the

Drone get it working just perfectly we

don't have to use an open log or

anything like that it's all built

in two for too long beta fpv flight

controllers have not had blackbox and

I'm really glad to see that they do now

so that's really really great and 16 Meg

is a lot as well for a tiny whoop

normally you only get 8 Meg so 16 Meg is

great to see and I think that pretty

much covers all of the bef flight

configuration so I've just got back from

flying the a65 around the flat as you

can probably tell from the goggle marks

on my face and I flew it with the 260

Mah and the 300 Mah beta fpv lava 1s

batteries I got about 4 minutes of

flight time cruising angle mode with the

260 Mah and that went up to 5 minutes of

flight time cruising in angle mode with

the 300

Mah in terms of how the Drone felt to

fly the tune was really good I didn't

notice any strangenesses with um how the

Drone was behaving and it flew really

well both in angle and Acro mode with

the 300 Milah pack the Drone was a

little bit calmer a little bit more

sedate a bit easier to control flying

through tight gaps but when I switched

to the 260 Mah pack I noticed that the

Drone was no noticeably quicker to

respond faster to accelerate faster to

change direction because that battery is

just that much lighter and I also found

actually it was a little bit more

difficult to control the Drone flying

under objects and flying through tight

gaps because it was more responsive and

I think I might benefit from a little

bit of throttle Expo when I'm using that

lighter 260 milliamp power pack so that

I have a bit more low throttle control I

didn't need that at all with the 300

mamp in terms of the camera the camera

picture from the Drone is really nice

the camera copes with changing light

levels reasonably well um it doesn't

stay Overexposed for too long it it

changes its exposure nice and quickly

and I didn't have any trouble flying

from darker areas of the flat into

lighter areas of the flat with uh the

camera kind of compensating for that

change in light level the Drone was set

to 25 M output power on the VTX and that

was absolutely fine I didn't notice any

dropouts or anything I think going up to

200 or even 400 Ms output power is only

really necessary if you're flying longer

distances you want to fly behind walls

or fly outdoors I saw a little bit of

occasional white Flash from Wi-Fi but it

was totally fine totally flyable and the

picture from the camera was lovely now

let's take a look at the configuration

in betaflight the tune on the Drone and

see if there is anything we can do to

improve it even further now I know that

beta fpv have put a custom pit tune on

this drone but their tune isn't perfect

it's a little conservative in some areas

so I wanted to give give you my tune for

the a65 and I'm also going to upload

this as a preset so that you can apply

this directly from Bight configurator in

the presets tab looking first at the

filters the main change that I made here

is just to raise the cut off for gyro

low pass 2 up to 1,000 HZ so we want

just gyro low pass 2 enabled because

we're running a 4K pit Loop so we need

an anti-aliasing filter and gy low pass

2 is that filter so we're going to raise

that to a cut off of ,000 Herz and a pt1

filter type for the RPM filters because

these motors are spinning so so fast you

don't need three notches for this little

drone just a single RPM filter is going

to do everything that you need it to do

so just go ahead and set that to one and

then we are going to need the Dynam

Dynamic Notch filter because there is a

nasty frame resonance at about 200 HZ

that we need to take care of and so we

just need a single Notch here with a 500

Q factor and between 120 and 500 HZ for

the frequencies that all works perfectly

fine once you've got all those set you

don't need to change the dterm low pass

filtering that's fine and the your low

pass filter is also fine to leave

enabled once you've got all that set you

can hit save and then we'll move on to

the pids so the PID profile settings are

in this tab and the main changes that

we're going to make here is we're going

to set damping gains to one and slightly

increase the p&i gains to 1.3 to get a

bit of a faster snappier response

because the Drone was a little bit

undertuned with the p&i gains down at

1.15 stick response gains I've moved up

to one just so we get a little bit of

feed forward to improve the

responsiveness of the Drone Dynamic

damping I left at zero that's fine and

then the pitch tracking I found I needed

to increase that because the Drone is

quite a lot heavier quite a lot more

inertia on the pitch axis than the roll

axis because of the orientation of that

battery so I up that to 1.2 the master

multiplier fine to leave at 1.3 of

course as with all of my presets all of

my Tunes you can always nudge that

Master multiplier up a little bit more

to get a faster snappier response and

just make sure to check blackbox logs

because it's really hard to hear

oscillations on little tiny drones like

this so just check the blackbox logs to

make sure you're not getting any P or D

term oscillation but you can try

increasing that Master multiply if you

want but honestly the Drone flies

brilliantly with 1.3 so I just left it

at that

once you're happy with all of this you

can just hit save and that's the pit

chune applied of course you don't need

to go and make these changes manually

you can always just apply my preset and

you'll find that in the presets tab

it'll be called AOS 65 mm or something

along those lines I've checked out this

tune both for the 260 mAh battery and

the 300 mAh battery and the tune is the

same for both of those packs there's not

enough difference in weight to need to

change the tune and it does fly in my

opinion ever are slightly better than

the stock tune particularly when looking

at logs the delay and the speed with

which the Drone responds to inputs is

definitely improved a little bit with

that slightly higher P term and we're

not getting any overshoot or anything

like that so it's all looking pretty

good I also want to test out the output

power of the VTX on this new air G4

all-in-one flight controller so let's

head over to the bench I'm going to hook

the VTX output up to my true RMS power

meter and we're going to see how it

perform forms in the various different

modes that you can set it to Okay so

we've got everything set up on the bench

the Drone is powered over USB 5 Vols now

I have checked that the VTX results are

exactly the same if you power it from a

battery or over USB USB is just easier

because the battery won't go flat the

VTX output is connected through a 30db

attenuator into my ADL 5902 true RMS

power meter and that's going to give us

a very accurate measure of the conducted

output power from the VTX and it's

independent of frequency so we're

starting off with the Drone set to 25 M

of output power on raceband 1 and what

you can see is that the VTX is

outputting just about 200 Ms of output

power so that's eight times the setting

so we've set it to 25 M it's outputting

200 now let me change to raceband 8 so

you can see what happens to the power

okay this is race band 8 now and you can

see that the power has dropped right

down and now we're at just about

20 28 mow something like that there is a

huge variation in output power with this

VTX between race Band 1 and race band 8

and that is um not unexpected often most

btxs will output their maximum power at

the lower frequency but it is important

to bear in mind that you're nowhere near

25 M of conducted output power on

raceband 1 and you're still above 25 M

of conducted output power on Race band 8

now let's change to the 400 m settings

so this is the maximum output power that

the VTX can deliver okay so this is 400

m on raceband 8 and you can see that 400

m on Race band 8 is giving us just about

270 M of conducted output power now let

me change it back to race Band 1 and you

can see kind of what the maximum

conducted output power of this VTX can

deliver okay so this is set now to race

Band 1 and you can see we are getting

over 600 M of conducted output power on

raceband one so it does make a huge

difference what you have the VTX set to

as to the amount of output power that

you get out of it all right so based on

all this testing what have I got to say

about the new beta fpv S65 well let's

start with all the things that I like

about it I really like the frame the

metor 65 Frame has always been a really

good frame for 65 mm tiny whoops it's

lightweight and nice and durable I like

the motors 0702 they're lightweight

Motors 23,000 KV was plenty of

performance for me but they are also

doing a 27,000 KV version for racing

which will give even more performance um

the props seemed really nice and I had

plenty of responsiveness and performance

out of the motors and the props can't

complain there in terms of the canopy

the new canopy for the air um it has all

the same functionality and features as

the meteor 65 canopy at less weight and

weight is so important for tiny whoops

that I'm really pleased they've gone

with this even lighter weight canopy

that's a definite Improvement in terms

of the new um air G4 flight controller

allinone I really like the feature set

of this little flight controller it's

got a new micro custom OSD chip to save

some space and some weight it's got 16

megabytes of onboard blackbox storage

which is huge for a tiny whoop it's got

a G4 processor which is perfectly good

enough to run 4K with all the bells and

whistles on and the custom config and

tune that they put on the flight

controller for this little a65 was

actually pretty good um we've improved

it a little bit in this video but the

outof boox experience was absolutely

fine the Drone flies really nicely with

either the 260 or the 300 Mah beta fpv

lava 1s batteries and the express lrs

receiver I would have liked to have seen

this included on the light controller

board rather than as a separate

component kind of stuck on um that would

have helped save a little bit of weight

and made the whole drone a little bit

more simple and compact but you know it

is what it is the VTX has plenty of

output power it has a big range of

output power sometimes a little bit

different from what the setting is but

okay it's not calibrated or trimmed or

anything like that but it's it's

performing okay and you're getting heaps

of output power on raceband 1 and

overall the output power is very

acceptable in terms of the camera the C3

beta fpv camera is really nice it's got

a nice image the colors are okay and um

its ability to compensate for changing

light levels is Pretty good overall the

image from the camera is pretty nice

it's pretty respectable given that it's

a nanosiz camera and Tiny cameras do

often struggle to get quite the same

Clarity and definition that you get from

a larger camera but this is really good

for Nano camera I'm I'm totally happy

with it and the little whip antenna for

the VTX nice and lightweight it's really

good so yeah there's there's not really

much to fault about this this drone

who's it going to be right for well it's

going to be right for a first drone for

someone never flown fpv before want to

get into fpv want something small

lightweight cheap not too intimidating

this fits the bill it flies really

nicely you can fly Acro with it as well

as angle um and it's got all of the

features on there that you're going to

want to learn how to use like blackbox

and logging and all of that stuff so you

can get into fpv very easily with this

little drone for not too much money it's

also going to be perfect for someone as

just a fire and forget tiny whoop you're

an experienced pilot you could build

your own or maybe you just buy something

that works really nicely out of the box

this is that drone it works beautifully

out of the box and it's got all of the

features that you're going to expect to

see based on your experience with larger

drones so yeah it's really pretty close

to a slam dunk from B to fpv the only

thing that I can find to say is let's

get the

elrs receiver on the board next time

just to get that weight down even more

and make it even more kind of Monolithic

and integrated but I mean if that's the

only thing that I can find oh and if you

don't fly elrs you can buy plug and play

and put your own receiver on there I

mean that that is a benefit so I can't

knock them for it really lovely little

drone everything you need if you want to

pick this drone Up Is Down in the video

description all the links are affiliate

links which means that if you click

through and you make a purchase the

retailer that you buy from will make a

donation on your behalf to support the

channel it really helps me out and it

won't cost you a penny so it doesn't

cost you anything it's the retailer that

makes the donation to me on your behalf

so it's win-win it's free for you and it

helps me make more videos like this

thank you so much much for watching hope

you love the video and I'll see you in

the next one happy fly

[Music]