ARM Cortex-M Instruction Set (introduction)
Summary
TLDRThe video script discusses the evolution of ARM processor instruction sets. Initially, ARM used a 32-bit instruction set, which was powerful but required large, expensive program memory. In 1995, ARM introduced the 16-bit Thumb instruction set for better code density and cost-efficiency. However, some functionalities still required the 32-bit ARM instruction set. To address this, ARM launched the Thumb-2 instruction set in 2003, which included both 16-bit and 32-bit instructions, balancing code density and performance. Most Cortex-M processors, including the M4, now only support Thumb-2 instructions. The script also explains data size definitions in ARM processors, such as bytes, half-words, words, and double words.
Takeaways
- đ Before 1995, ARM processors used a 32-bit instruction set known as the ARM instruction set.
- đĄ The ARM instruction set was powerful and provided good performance but required larger program memory, leading to higher costs and power consumption.
- đ In 1995, ARM introduced the 16-bit Thumb instruction set to address the high memory requirements and power consumption.
- đ The Thumb instruction set offered better code density compared to 32-bit instruction sets but had a performance trade-off.
- đ In 2003, ARM introduced Thumb-2, which included both 32-bit and 16-bit instructions, combining the benefits of code density and performance.
- đ» Most modern Cortex-M processors, including the Cortex-M4, support only Thumb-2 instructions and not the original ARM instruction set.
- đ The Cortex-M3 and M7 processors also support Thumb-2 instructions exclusively, while the M0 and M0+ processors partially support 32-bit Thumb instructions but fully support 16-bit Thumb instructions.
- đ ARM processors define data sizes as follows: a byte is 8-bits, a half-word is 16-bits, a word is 32-bits, and a double word is 64-bits.
- đ The script suggests that future lectures will delve into specific instructions within the ARM and Thumb-2 instruction sets.
Q & A
What was the primary issue with the original 32-bit ARM instruction set before 1995?
-The original 32-bit ARM instruction set, while powerful and providing good performance, required larger program memory compared to 8-bit and 16-bit processors. This was problematic due to the high cost and power consumption associated with larger memory sizes.
Why did ARM introduce the 16-bit Thumb instruction set in 1995?
-ARM introduced the 16-bit Thumb instruction set in 1995 to address the issue of high memory consumption and cost associated with the 32-bit instruction set. The Thumb instruction set provided better code density and reduced memory requirements.
What was the main limitation of the 16-bit Thumb instruction set introduced in 1995?
-The 16-bit Thumb instruction set could not perform all the functionalities that the 32-bit ARM instruction set could. There were certain tasks that still required the use of the 32-bit ARM instruction set, which is why ARM processors had to support both instruction sets.
How did the introduction of the Thumb-2 instruction set in 2003 improve upon the Thumb instruction set?
-The Thumb-2 instruction set introduced in 2003 included both 32-bit and 16-bit Thumb instructions, allowing ARM to maintain the high code density of the Thumb instruction set while also achieving the performance benefits of the 32-bit instruction set.
Which ARM processors only support Thumb-2 instructions?
-Most Cortex-M processors, including the Cortex-M4, Cortex-M3, and Cortex-M7, only support Thumb-2 instructions and do not support the original ARM instruction set.
What is the difference in instruction set support between the Cortex-M0 and Cortex-M0+ processors?
-The Cortex-M0 and Cortex-M0+ processors partially support the 32-bit Thumb instruction set but fully support the 16-bit Thumb instruction set.
What are the data size definitions in ARM processors?
-In ARM processors, a byte is defined as 8-bits, a half-word as 16-bits, a word as 32-bits, and a double word as 64-bits.
Why is code density important in embedded systems like those using Cortex-M processors?
-Code density is important in embedded systems because it directly affects the amount of memory required to store the program. Higher code density allows for more efficient use of memory, which is often a limited and expensive resource in embedded systems.
How does the support of both 16-bit and 32-bit Thumb instructions in Thumb-2 affect performance?
-Supporting both 16-bit and 32-bit Thumb instructions in Thumb-2 allows for a balance between code density and performance. The 16-bit instructions save space, while the 32-bit instructions can provide the necessary performance for more complex tasks.
What are the implications of a processor only supporting Thumb-2 instructions for software development?
-For software development, a processor that only supports Thumb-2 instructions means that developers must use this instruction set for all their code. This can simplify development by reducing the need to switch between different instruction sets but may also impose certain limitations or require specific optimization strategies.
Outlines
đĄ Evolution of ARM Instruction Sets
The paragraph discusses the evolution of ARM processors' instruction sets. Initially, ARM processors used a 32-bit instruction set known as the ARM instruction set, which was powerful but required more memory, leading to higher costs and power consumption. In 1995, ARM introduced the 16-bit Thumb instruction set to improve code density and reduce memory requirements. However, some functionalities still required the 32-bit ARM instruction set, necessitating support for both. To address this, ARM introduced the Thumb-2 instruction set in 2003, which included both 32-bit and 16-bit instructions, balancing code density with performance. Most Cortex-M processors, including the Cortex-M4, now only support Thumb-2 instructions. The paragraph also explains data size definitions in ARM processors: a byte is 8-bit, a half-word is 16-bit, a word is 32-bit, and a double word is 64-bit.
Mindmap
Keywords
đĄCortex-M
đĄInstruction Set
đĄARM Processors
đĄThumb Instruction Set
đĄCode Density
đĄPerformance
đĄMemory
đĄPower Consumption
đĄData Size Definitions
đĄThumb-2 Instruction Set
Highlights
Before 1995, ARM processors used a 32-bit instruction set known as the ARM instruction set.
The ARM instruction set provided good performance but required larger program memory compared to 8-bit and 16-bit processors.
In 1995, ARM introduced the 16-bit Thumb instruction set to address the issue of memory size and power consumption.
The Thumb instruction set offered most of the functionality but not everything, necessitating some coding in the 32-bit ARM instruction set.
ARM processors started supporting both ARM and Thumb instruction sets to maintain functionality and performance.
The Thumb instruction set provided better code density compared to other 32-bit instruction sets.
The downside of the Thumb instruction set was its impact on performance due to handling two types of instructions.
In 2003, ARM introduced the Thumb-2 instruction set, which included both 32-bit and 16-bit Thumb instructions.
Thumb-2 maintained the code density of Thumb while improving performance to match the 32-bit instruction set.
Most Cortex-M processors, including the Cortex-M4, support only Thumb-2 instructions.
The Cortex-M3 and M7 processors also support only Thumb-2 instructions, not the ARM instruction set.
The M0 and M0+ processors partially support the 32-bit Thumb instruction set but fully support the 16-bit Thumb instruction set.
ARM processors define data sizes with a byte as 8-bit, a half-word as 16-bit, a word as 32-bit, and a double word as 64-bit.
Future lectures will delve into specific instructions within the ARM and Thumb-2 instruction sets.
Transcripts
so let's talk about the cortex-m
instruction set so before 1995 ARM
processors used to use a 32-bit
instruction set called the arm
instruction set so this instruction set
was really powerful and provided really
good performance but at the same time it
required larger program memory when
compared to 8-bit and 16-bit processors
this was an issue because memory was and
still is expensive and it also consumed
a lot of power so in 1995 arm introduced
the 16-bit thumb instruction set at this
time now arm started supporting on their
processors both the arm instruction set
and the thumb instruction set this was
because the 16-bit thumb instruction set
could do most of the functionality but
not everything so there were still some
things that needed to be coded in the
32-bit arm instruction set which is why
arm had to support both but the 16-bit
thumb instruction said it provided
really good code density when compared
to other processors running only 32-bit
instruction sets the downside though was
the impact on performance because there
were these two types of instructions at
16-bit and 32-bit that the processor had
to handle so in 2003 arm introduced the
thumb to instruction set so the tongue 2
instruction set has both 32-bit thumb
instructions as well as 16-bit thumb
instructions so in this way arm was able
to keep the excellent code density of
the thumb instruction set as well as the
performance of the 32-bit instruction
set so you'll see most of the cortex-m
processors these days only support thumb
instructions which is the tongue 2
instructions and this is the case even
with our processor which is the cortex
m4 it only supports the thumb 2
instruction set and does not support the
arm instruction set
this is also true for the m3 and m7
processors for the M 0 and M 0 plus
processors they partially support the
32-bit thumb instruction set but they
fully support the 16-bit thumb
instruction set another really useful
thing to know is what is the data size
definitions in arm processors so an ARM
processors a byte is considered as 8-bit
a half word is considered as 16-bit a
word is considered as 32-bit and a
double word is considered as 64-bit so
now that you know a little bit about the
arm instruction set and the thumb 2
instructions we'll be talking about some
of the instructions in the later
lectures
Voir Plus de Vidéos Connexes
ARM Buffer Overflow
RISC vs CISC | RISC | Reduced Instruction Set Computer | CISC | Complex Instruction Set Computer
Important parts of 8051 Microcontroller | Accumulator of 8051 | Program Counter of 8051 | 8051
The Era of 1-bit LLMs-All Large Language Models are in 1.58 Bits
Read Interrupt Mask Instruction In 8085 | RIM Instruction In 8085 Microprocessor
SFRs of 8051 Microcontroller | Features of SFR in 8051 | PSW | DPTR | TMOD | TCON | SCON | PMOD
5.0 / 5 (0 votes)