Creación de redes LAN MAN y WAN en packet tracer
Summary
TLDRIn this video, Mauricio Meza demonstrates the setup of a Red Land, a private network within a geographical area accessible only to certain individuals. He installs a switch, connects computers, a server, and a printer, and assigns IP addresses for communication. The tutorial also covers setting up a WAN connection, involving routers and serial connections, to connect multiple LANs over a larger distance, simulating a scenario of buildings separated by up to 50 kilometers.
Takeaways
- 🌐 The video discusses setting up a 'Red Land', a local area network within a geographical area allowing access to specific people.
- 🛠️ The initial setup involves installing a switch and connecting two computers, a server, and a printer to it using Ethernet cables.
- 💡 Connection status is indicated by green lights on the switch, which show that the devices are connected.
- 🔢 IP addresses are assigned to each computer for communication within the network, with an example given as 192.168.2.x.
- 📝 The script mentions configuring subnet masks and gateway addresses for devices, such as a printer and a server.
- 🌐 The video also covers the creation of a 'Red WAN', a network that connects multiple LANs over a larger distance.
- 🔌 For WAN connections, routers are connected using serial ports to establish connectivity between different networks.
- 🛂 Access to networks is controlled through configuration of routers and setting up appropriate IP addresses and subnets.
- 🔄 The process includes testing connections between devices to ensure successful communication within the network.
- 📈 The script touches on the scalability of WAN, indicating that it can cover much larger distances than a LAN.
- 🎬 The video is instructional, providing a step-by-step guide on setting up and configuring local and wide area networks.
Q & A
What is the main purpose of a Red Land network as described in the script?
-A Red Land network is designed for a geographically close area, allowing access only to certain people, typically with controlled bandwidth and managed by a local administration. It provides continuous connectivity for local services and connects physically close devices.
What devices are initially installed in the Red Land network scenario presented in the script?
-Initially, a switch, two computers, one server, and a printer are installed in the Red Land network scenario. These devices are connected directly to the switch using Ethernet cables.
How are the devices indicated to be connected in the script?
-The devices are connected to the switch using Ethernet cables, and the connection is indicated by the lights turning green on the devices, signifying that the connection is established.
What is the IP address configuration used for the computers in the script?
-The IP address configuration used for the computers is based on the 192.168.2.x range, with the first computer being assigned 192.168.2.2 and the second being assigned 192.168.2.1.
What is the purpose of configuring the IP addresses for the devices in the network?
-Configuring IP addresses allows the devices to communicate with each other within the network. Each device has a unique address that is used for data transmission.
What additional network setup is described after the Red Land network is established?
-After establishing the Red Land network, the script describes setting up a WAN (Wide Area Network) that connects multiple LANs over a larger distance, using routers and serial connections.
How are the routers connected in the WAN setup described in the script?
-The routers are connected using serial connections, and each router is configured with specific IP addresses to establish connectivity between different LANs.
What is the significance of the serial port in the context of the script?
-The serial port is used to connect routers in the WAN setup, allowing for communication between different LANs over a potentially large distance.
What is the method used to test the connectivity between devices in the script?
-The method used to test connectivity involves pinging an IP address from one device to another, checking for successful packet delivery and minimal packet loss.
What is the final configuration described for the WAN in the script?
-The final configuration for the WAN involves setting up static routes on the routers to direct traffic between different networks, with IP addresses such as 192.168.3.x and 192.150.x.x being used.
How does the script describe the potential distance covered by a WAN?
-The script suggests that a WAN can cover a large distance, mentioning an example of 50 kilometers, but also indicating that the actual distance could be much greater.
Outlines
🔌 Setting Up a Local Area Network (LAN)
The script introduces Mauricio Meza, who is setting up a local area network (LAN) within a geographically confined area accessible only to certain individuals. The network is controlled by a local administration and provides continuous connectivity for local services, connecting physically close devices. The initial setup involves installing a switch and connecting two computers and a printer using Ethernet cables. The devices are connected to the switch, and the script describes the process of checking the connection by observing the green lights indicating a successful link. The computers are then assigned IP addresses within the 192.168.2.x range to facilitate communication within the network.
📡 Expanding the Network with Routers
The script continues with the expansion of the network by introducing routers to connect different networks through routes. The process involves configuring the routers to access the networks. The script describes the physical connection of routers and the configuration of serial ports for communication between them. It also mentions the need for additional computers or laptops for the setup. The focus is on establishing connectivity between the routers and configuring them to recognize different network segments, such as network 2.2 and network 1, to ensure successful communication across the expanded network.
🌐 Testing Network Connectivity and Setup
This section of the script discusses testing the network connectivity by pinging devices within the network. The process includes using the ping command to check the connection between different devices, such as from a computer to another or to a router. The script highlights the importance of successful packet delivery and low packet loss as indicators of a good connection. It also describes the setup of a WAN (Wide Area Network) that connects multiple LANs over a larger distance, using routers and configuring serial ports for remote connections, and the automatic assignment of IP addresses for ease of setup.
🏢 Configuring a WAN for Distant Buildings
The final paragraph of the script focuses on configuring a WAN to connect three buildings that are distant from each other, potentially up to 50 kilometers apart or more. The setup involves configuring static routes to direct traffic between the networks of the different buildings. The script describes the process of assigning IP addresses and subnet masks to the routers to establish the correct paths for communication. It concludes with a successful connection test between the buildings, demonstrating the effectiveness of the WAN configuration and its ability to connect distant locations.
Mindmap
Keywords
💡Red Land
💡Switch
💡IP Address
💡Subnet Mask
💡Server
💡Printer
💡Fast Ethernet
💡Router
💡Serial Connection
💡WAN (Wide Area Network)
💡Configuration
Highlights
Introduction to creating a Red Land network, a private network within a geographical area accessible only to certain people.
Installing a switch as the first component of the Red Land network.
Connecting two computers and a server to the switch using Fast Ethernet cables.
Checking for green lights on devices to confirm successful connections.
Assigning IP addresses to computers for communication within the network.
Configuring a printer to be accessible within the Red Land network.
Exploring the concept of a Red WAN, connecting multiple networks over larger distances.
Setting up routers to handle connections between different networks.
Using serial connections to link routers and establish network communication.
Configuring routers with specific IP addresses and subnet masks for different networks.
Testing network connectivity between devices using IP addresses.
Demonstrating successful network connection with packet delivery and minimal loss.
Discussing the practical applications of Red Land and Red WAN networks in real-world scenarios.
Highlighting the importance of proper network configuration for effective communication.
Mentioning the use of switches in connecting multiple devices within a network.
Explaining the process of configuring network devices for optimal performance.
Concluding with a summary of the Red Land and Red WAN network setup and its capabilities.
Transcripts
[Música]
buenas noches mi nombre es mauricio meza
y en esta ocasión vamos a hacer
una red land es una red que se ve
ubicada dentro de un área geográfica muy
cercana que sólo permite acceso a
determinadas personas quienes sobre todo
lo que es un monte acceso
de ancho de banda controlar contra es un
conductor re controlada privada que
administra es una administración local
además proporciona conectividad continua
de los servicios locales y conecta
dispositivos físicamente cercanos el
primero que vamos a instalar en este
caso va a ser un switch nos vamos aquí
abajo en la parte de tweets instalamos
el primero
y para esta misma vamos a utilizar dos
computadoras
y pues si se pone una vez con servidor
también vamos a instalar una impresora
para que también tengamos acceso a
imprimir
con 50
lo primero que hay que hacer es conectar
las tres las cuatro las dos computadoras
el servidor y el
la impresora directamente al switch y
esto lo podemos hacer con un cable que
sería este y al momento de conectar los
podemos poner en el fast ethernet 1 y la
computadora en el mismo
aquí vamos a ver como luego se van
conectando poco a poco cuando los
foquitos se pongan en verde quiere decir
que ya la conexión existe
lo mismo con los demás
y aquí ya no nos configura ahora lo
único que hacer es que todo se quede
completo y darle a todas las
computadoras lo que sería el la
dirección ip que es la base por la cual
se van a comunicar nuestras computadoras
en este caso de 2.168
punto 2 que es la computadora 2 y nos da
directamente
[Música]
la sub máscara
vamos con la segunda
la misma situación 198 puntos 168
2.1 y nos da por automático nuestro
vasca para la impresora ponemos la
configuración
de dos puntos
y el servidor no 1000
los puntos juntos
como la conexión que este es para mandar
un email de una computadora a otra y en
la parte de aquí abajo nos aparece que
fue así toda la comunicación no podemos
ser la computadora del servidor y nos
aparece lo mismo
[Música]
camps es una red más lo que vamos a
hacer aquí que ya tenemos nuestra
realidad una red nueva recordemos que es
una red que conecta varias redes más a
través de que a través de los rutas
vamos a poner confrontar por aquí
[Música]
y estos van a ser una conexión seria
para eso necesitamos configurarlos
para que el acceso a nuestras redes que
vamos a hacer que es una red más lo que
vamos a hacer aquí que ya tenemos
nuestra regla una red nueva recordemos
que es varias redes que van a una red
que conecta varias les revés más a
través de que a través de los routers
vamos a poner consorte por aquí
y estos van a ser una conexión seria
para eso necesitamos configurarlos
configurarlos para que tengan acceso a
nuestras redes para eso vamos a
configurar los con estos aquí
a nuestros puertos serias
primero
esto va a permitir la conexión entre
gente en este por una puerta seria
pero para estrado también vamos a
necesitar computadoras
la duración al laptop
y lo mismo que ingresamos en los
switches
en este caso voy a ocupar el mismo
y en las conexiones también ya que
podemos hacer la conexión directa de
aquí a esta parte podríamos hacerla con
esto este nos va a dar la mejor conexión
en cada uno
los adultos conectarán fecha
y aquí configuramos cada uno
ah
ah
esta red no es diferente para que para
que no tenga ninguna ninguna diferencia
con la otra de los otros con el otro
servidor
[Música]
conectamos desde aquí como podría ser
[Música]
ah
[Música]
[Música]
[Música]
el audio pero lo que estoy haciendo es
conectar los routers para que tengan red
de cada lado
i
y configurarla
ya vemos que el conexión de este lado
conectó la red
[Música]
2
2
que sería la punción
d
y ya vemos que empieza a haber conexión
ahora nos falta conectar los routers y
esto hace por el puerto sería
[Música]
y aparte hay que configurar
aquí en la red
[Música]
viena segundo
[Música]
y el otro es el 1
conectado
nudos
y lo encendemos
y ahora el bosque ya empieza a ver
colección
[Música]
y ahora lo que es
en este caso nos volvemos
[Música]
y para esto vamos a ver
en
punto
y ese modo lo mismo del otro lado
es esta la queremos comenzar
puntos
por dónde va a entrar está buena
2
[Aplausos]
y ahorita de vidente
n
conectados si buscamos la conexión diría
que aquí ya nos aparece conectado y en
este caso hacemos pruebas con de la
segunda o la tercera y no sólo para este
exitoso aquí aquí y quiere decir que ya
hay conexión esta es una forma de probar
podemos probarlo también a partir del
pin
y le ponemos lo que queremos conocer 192
puntos
punto
4
y nos aparece que tiene conexión entre
las 44 paquetes entregados recibidos y
perdidos 5 y eso quiere decir que ya en
conexión
dv
de este street de esta computadora a
este otro
bueno ya que tenemos las nuestra red man
ahora vamos a hacer nuestra red one es
esto una red que conecta varias redes
lan a una distancia mayor esto lo
podemos hacer de la misma forma
conectamos otros beach otro router
otros bits
[Música]
y conectamos computadoras
y vamos a hacer primero las conexiones
y yo con éste puede hacerse más fácil
conectar porque nos da por automático la
mejor conexión de cada uno
recuerden que para nuestro router hay
que configurar lo que vamos a poner va a
ser
un puerto serial que nos ayude a
conectar esto
y lo encendemos
ya que se conecten ponemos el puerto
serial
este va a ser el 3
vamos a configurar esta red
con las 192 168 3 en este caso va a ser
dos las más caras
3.1
y cerramos configuramos los demás
no no
[Música]
[Música]
tres puntos
[Música]
y configuramos el rock
esta conexión qué es
el internet 06
31
en
[Música]
pero tenemos que hacer lo mismo que aquí
con esto
con él serían
[Música]
a quien imponemos sino 17 mente en que
sería el 50
00 y le vamos a agregar una red nueva
punto
punto 151 todos
es más caro por automático y la
encendemos esta es una red nueva
entonces lo que vamos a hacer
193
150 puntos
vamos a
presentarlos
qué es las 192 puntos 168
punto 1 que la red que queremos conocer
con las máscaras 255
a través de la red
192.200 tres puntos
50 puntos es la red que tiene esta vez
y a su vez está
92.100 de 3.0 a través de la marca
55
[Música]
y tenemos el a 192 puntos 105 268
punto 150 puntos
[Música]
qué es la red que necesito tenemos
también aquí
y vemos la conexión probamos
entre este sistema no está correcto y
probamos la conexión
y aquí ya nos aparece éxitos
y aquí vamos a aparecer pero de aquí acá
no nos aparece porque porque tenemos que
presentar esta red ahí está a través de
qué puerto lo vamos a ponerlas para esto
entonces vamos a conectar en este lugar
estática cuál es la queremos conocer 192
0
a través de la maestra 255
y con cual puerto que es el mismo que
tenemos 192 puntos 168 puntos 150 puntos
es la misma que tenemos aquí abajo
este mes hemos exactamente lo mismo
vamos a configurarlo de esta forma
porque porque este ya conoce las dos
vías
y sería la red 192 punto 161 puntos
1.3 que es la que queremos conocer a
través de la máscara 255
y de 192 puntos
100.1 que es el mismo puerto por el que
queremos conocer a la red
y no solo
esperamos se configuren y ahora si
hacemos
probamos conexión de aquí y aquí tenemos
conexión exitosa de aquí
aquí igual
de fiesta y esta corrección
conexión
y conexión y xxi quedaría configurado a
nuestra red one es como decir que estos
son tres edificios de diferentes lados
a una distancia mayor que hace conectar
que esté a este que está más cerca aquí
como de 50 es de 50 kilómetros y este
podría ser mucho mayor la distancia
porque de aquí aquí hay 50 y ya que aquí
hay 50 entonces podría ser mucho mayor
de distancia que abarca una red wan
y eso sería todo por mi parte y ahora
[Música]
Ver Más Videos Relacionados
Configuracion Basica de Router y Switch en Cisco Packet Tracer 2020
How to Configure LAN Segments in VMware Workstation Pro
CONECTAR DOS REDES A UNA IMPRESORA EN PACKET TRACER 7
How to configure DHCP server | DHCP server configuration step by step
1.- Enrutamiento Estático 3 Routers
Konfigurasi DHCP Server dan DHCP Client pada Router Mikrotik RB 951Ui-2HnD
5.0 / 5 (0 votes)