Caçamba de carrinho de mão ou carriola fabricação - como fazer um carrinho de mão - Carrinhopedreiro
Summary
TLDRIn this DIY video, the host demonstrates the transformation of an old refrigerator into a handcart. The video showcases the precise measurements and leveling of the cart, ensuring a perfect square base of 40x40 cm, with a height of 30 cm. The sides are carefully angled to match the front and back dimensions, with the back being slightly lower for an even look. The host also uses the refrigerator's edges to create reinforcements, enhancing the cart's sturdiness. After painting, the final result is a neat and functional handcart, proving that repurposed materials can be just as durable and aesthetically pleasing as store-bought ones.
Takeaways
- 🛠️ The video is a follow-up on a previous one, showing the continuation of a DIY project to recycle an old refrigerator into a cart.
- 📏 The dimensions of the cart are detailed, with the base being a perfect square of 40cm x 40cm and the height of the sheet metal being 30cm.
- 📐 The front of the cart is 61cm in length, and the back is 40cm, with a height of 18cm, creating a slanted effect for even leveling.
- 🔨 The left side of the cart is measured, showing a 30cm height from the front and a 51cm length with an 18cm side, indicating a slight angle for structural integrity.
- 🔧 The video explains how to create an angle for the side of the cart, referring viewers to a previous video for detailed instructions.
- 🛡️ The edges of the refrigerator were utilized to create folds that act as reinforcement, similar to a gutter.
- 🎨 After the construction, the cart is to be painted to protect it and enhance its appearance.
- 🎉 The final result of the cart is shown, with the narrator emphasizing its good condition and even leveling.
- 👍 The narrator mentions that using a thick and good quality sheet metal from the refrigerator makes the cart more durable than store-bought ones.
- 📹 The narrator encourages viewers to subscribe to the channel and like the video, promising more content in the future.
- 📚 The importance of painting for protection is highlighted, and the video showcases the cart's interior and exterior after painting.
Q & A
What is the main purpose of the video?
-The main purpose of the video is to show the finalization of a homemade wheelbarrow dump made from an old refrigerator, including measurements, adjustments, and the final look after painting.
What are the exact dimensions of the base of the dump?
-The base of the dump is a square with dimensions of 40 cm by 40 cm.
What is the height of the front panel of the dump?
-The height of the front panel of the dump is 30 cm.
How does the rear panel differ from the front panel in terms of height?
-The rear panel is 18 cm tall, which is 12 cm shorter than the front panel, making it 51 cm wide at the top.
What is the significance of the 18 cm height mentioned for both the rear and side panels?
-The 18 cm height for the rear and side panels allows for proper alignment and balance, ensuring that the dump has a slanted shape for efficient loading and unloading.
How are the sides of the dump reinforced?
-The sides of the dump are reinforced using the edges of the refrigerator sheet metal, which have been folded to create a stronger structure similar to an angle bracket.
Why is painting the dump important?
-Painting the dump is essential to protect the metal from rust and wear, ensuring the durability and longevity of the wheelbarrow.
What advantage does using a refrigerator sheet metal provide?
-Using refrigerator sheet metal provides the advantage of having thicker and more durable material compared to commercial dumps, making it more resistant and reliable.
How does the presenter ensure that the dump is level?
-The presenter ensures that the dump is level by carefully measuring and aligning all sides during assembly, resulting in a perfectly balanced and level structure.
What additional resources does the presenter offer for viewers who want to replicate the project?
-The presenter offers a link to a previous video in the description and comments, where they explain how to make precise cuts and angles for the project, providing further guidance for viewers.
Outlines
🔧 Finalizing the Handcart Project
In this paragraph, the creator continues from the previous video, detailing the final steps in assembling the handcart made from a recycled old refrigerator. The focus is on achieving perfect alignment and level surfaces for the cart. The creator then demonstrates the accurate measurements of the cart, emphasizing the importance of precision. They provide tips on how to pause the video and take the correct measurements, ensuring there are no mistakes.
📏 Measuring and Cutting for Perfection
This part explains the specific dimensions of the handcart. The bottom of the cart is described as a perfect square with each side measuring 40 cm. The front panel has a height of 30 cm and a length of 61 cm, while the back panel, slightly lower for balance, measures 40 cm in width, 18 cm in height, and 51 cm in length. The creator carefully details how to achieve the necessary angles and precise cuts, referring viewers to a previous video for more in-depth instructions on creating the perfect angles.
🛠️ Crafting the Side Panels
The focus shifts to the left side panel, where the creator provides instructions on measuring and cutting it with a reference height of 18 cm and a front height of 30 cm. They explain the importance of achieving the correct angle for a well-fitted panel and guide the audience to the previous video for more details on this technique. The process is mirrored on the right side panel, ensuring both sides are consistent and properly aligned.
🏗️ Reinforcing the Structure
In this section, the creator shares a clever technique of using the refrigerator’s original edges as reinforcement for the handcart. By cutting along these edges and leaving them intact, they create a natural support similar to an angle iron, adding significant strength to the structure. The creator praises the durability of the cart, noting that it’s even sturdier than commercially available options, with precise leveling and a well-balanced design.
🎨 Final Touches and Painting
The final paragraph highlights the importance of painting the handcart to protect it and enhance its appearance. The creator shows off the finished product, emphasizing the quality and durability of the cart made from the recycled refrigerator. They point out the smooth finish, well-leveled structure, and overall aesthetic appeal. The video concludes with a call to action, encouraging viewers to subscribe to the channel and like the video to support the creator.
Mindmap
Keywords
💡Recycling
💡Handcart
💡Dimensions
💡Leveling
💡Refrigerator
💡Caçamba
💡Painting
💡Steel Plate
💡Angle
💡Reinforcement
Highlights
Introduction of a DIY project to recycle an old refrigerator into a handcart.
Demonstration of the completed project showing the leveled and measured dimensions of the handcart.
Explanation of the handcart's square base with dimensions of 40x40 cm.
Description of the front panel dimensions matching the base at 40 cm and the top at 61 cm.
Measurement of the rear part of the handcart, 40 cm wide and 18 cm high.
Detailing the top dimensions, 51 cm long and 10 cm shorter than the front for symmetry.
Instructions on how to cut and angle the left side of the handcart for a proper fit.
Link provided in the description for a tutorial on how to achieve the correct angle for the handcart sides.
Utilization of refrigerator edges to create reinforcements similar to a gutter.
Mention of the importance of the rear part's dimensions for leveling the handcart.
Explanation of the front door's larger size for leveling purposes.
Plans to paint the handcart for a finished and protected look.
Showcase of the handcart's interior after painting, emphasizing the evenness and quality.
Advantages of using a thick and good-quality metal sheet from a refrigerator for the handcart.
Final thoughts on the handcart's leveling and overall build quality.
Call to action for subscribing to the channel and liking the video.
Transcripts
e fala galera trazendo aqui a
continuidade aquele vídeo anterior aí no
canal da caçamba feito para o carrinho
de mão reciclando a geladeira velha é o
seguinte eu vou trazer aqui pra vocês
aqui ó mais simples entendeu que agora
aqui ó finalização dele depois de
colocado olha como que ele ficou certo
nível ladinha o que que fez pode olhar
aqui que está nivelado certo a altura
agora vou mostrar para vocês o
comprimento dele o tamanho altura tudo
certinho pra vocês não tem erro eu vou
colocar a câmera aqui Deixa uns
minutinhos aqui quer ver o segundinho
cardeais aí ela aí qualquer coisa você
coloca uma pausa no vídeo e tira as
medidas tudo certinho ela que não tem
erro certo então vamos começar aqui ó o
fundo da caçamba é um quadrado exato
certo 40 40 40 40 certo a frente é o
seguinte é o 40 do fundo certo e o
comprimento lá daquele cima aqui certo
que são 61cm altura da chapa
é a referência da altura altura são 30cm
certo agora vamos na parte traseira aqui
ó
e a parte traseira são os 40 cm que é o
do fundo da chapa certo os 18 cm que é a
altura certo e e aqui em cima são 51 cm
são 10 cm a menos do que a frente para
ele ficar fome lado ó certinho agora que
vem a lateral esquerda aqui ó a lateral
esquerda aqui ó é o seguinte você vai
tirar a referência aqui ó 18 cm certo e
aqui na frente aqui são uns 30 cm de
altura tirou aqui aí vocês vão dar o
grau no vídeo anterior tá explicar
explicando como que dá o grau aí vocês
olha no vou deixar o link aqui no abaixo
aqui na descrição e no comentário vocês
vai lá entra lá e ver como é que você
vai conseguir tirar esse grau é
simplesinho simplesinho certo e do lado
de cá a mesma esquema amor os 18 cm do
lado de cá os 30 atropelado de carro
certo que a altura daqui ó aí o grau
você vai achar o grau certinho que é o
comprimento de
É certo que e é isso aí ó e eu
aproveitei as beiradas da geladeira para
cortar deixando essas dobras aqui para
ficar um reforço como se fosse uma
cantoneira e o carrinho ficou excelente
me ver ladinha a parte traseira tem que
ser 18 porque o arco ele é maior e aqui
atrás e lá na frente ele vai despontando
e a porta à frente tem que ser maior
porque para ficar nivelado o carrinho
certinho eu vou pintar aí depois eu
mostro depois de como que ficou depois
de pintado É isso aí já foi finalizada
EA pintura e tá tudo bonitinha olha aí
como que ficou
Olá tudo certinha
E aí
E aí ficou bonitinho olha por dentro
certa pintura é essencial para proteger
o carrinho e é o seguinte cara essa
caçamba feito de geladeira é bom que a
chapa é grossa Chapa é boa fica até
melhor que aquelas que é comprada Nossa
fica bem melhor já é bem mais resistente
e olha o nivelamento nele que beleza me
de ladinha Entendeu essa caçamba feito
nessas medidas aí o grau é perfeito que
fica bonitinha tudo certinho bem
nivelado então é isso aí ó se eu puder
ir se inscreva no canal e deixa o like
fortalecer aí e até no próximo vídeo
valeu
تصفح المزيد من مقاطع الفيديو ذات الصلة
5.0 / 5 (0 votes)