Cara pemasangan tape mobil.

Summary

In this tutorial, the VARIADVAN TUTORIAL CHANNEL demonstrates how to wire a car tape system, including connecting speaker cables and power lines. Viewers will learn how to identify speaker wires (positive and negative) and correctly attach them to the speakers. The tutorial also covers power cable connections, including the negative and positive battery lines, and explains how to use an ignition switch to control the car tape. After installation, the system is tested by turning it on and playing music, providing a complete guide for car audio setup. Perfect for beginners looking to learn about car electronics.

Takeaways

• 😀 Properly identifying the different speaker wires (purple, gray, white, green) in the car tape is crucial for connecting the speakers correctly.
• 😀 Purple wires without a stripe are the positive speaker wires, while the ones with black stripes are the negative speaker wires.
• 😀 To connect the first speaker, match the positive red speaker wire with the plain white wire and the negative black speaker wire with the white wire with a black stripe.
• 😀 The second speaker follows the same process: connect the positive green speaker wire with the plain green wire and the negative black speaker wire with the green wire with a black stripe.
• 😀 For power connections, the black wire from the car tape should be connected to the negative terminal of the battery or the car's body for grounding.
• 😀 The yellow wire from the car tape connects directly to the positive terminal of the battery for power.
• 😀 The red wire from the car tape should be connected to the ACC terminal to control the on/off state of the car tape, but a switch can be used for testing purposes.
• 😀 If you're only using two speakers, only the necessary speaker wires (white and green) need to be connected from the car tape.
• 😀 Ensure the ignition (or an alternative switch) is used for the red wire to allow the car tape to turn on and off as needed.
• 😀 After wiring, it's important to test the setup by inserting a flash disk to check that the car tape works and plays music as expected.

Q & A

What is the purpose of the purple wire with a black stripe in the car tape wiring?

The purple wire with a black stripe is used as the negative line for the speaker.

How do you connect the speaker cables from the car tape to the speakers?

You connect the red cable from the speaker to the plain white wire (positive) from the car tape and the black-striped white wire (negative) to the speaker's negative terminal.

Why are only two speaker wires being used in the tutorial?

The tutorial focuses on installing two speakers, so only two speaker wires (white and green) from the car tape are used. If more speakers are needed, you can use all four speaker wires.

What should the red cable from the car tape be connected to?

The red cable from the car tape should be connected to the ignition circuit, or in this tutorial, it is connected to a switch that simulates the ignition.

How is the battery power connected to the car tape?

The yellow cable from the car tape should be connected to the positive terminal of the battery, and the black cable should be connected to the negative terminal or the car’s chassis.

What is the function of the red wire connected to the ignition?

The red wire controls the on/off function of the car tape. It is designed to turn the car tape on when the ignition is on.

How do you test if the car tape is working after installation?

To test the car tape, turn on the switch, insert a flash drive or memory card, and check if music plays. This verifies the installation is successful.

What do you do if you want to connect more than two speakers?

If you want to connect more than two speakers, use all the available speaker wires from the car tape (purple, gray, white, and green) and connect them to the respective speakers.

What is the purpose of the black cable in the installation process?

The black cable is used to connect to the negative terminal of the battery or the car's chassis, serving as the ground connection.

Why does the tutorial use a switch instead of connecting the red cable directly to the ignition?

The switch is used in this tutorial as a stand-in for the ignition system to show how the car tape would normally turn on and off when the ignition is engaged.