Snapped coil spring replacement HYUNDAI TUCSON #hyundai #tucson #snappedcoilspring

Summary

In this video, the host demonstrates how to replace the front left coil spring on a Hyundai Tucson. The process begins by removing the wheel and loosening various bolts, including the sway bar link and ABS wire bolts. The old coil spring, which is broken, is removed, and the new spring is carefully compressed and installed. Special caution is advised when handling the spring compressor. After the new spring is in place, the components are reassembled, the wheel is reattached, and the vehicle is lowered. The video concludes with a reminder to like and subscribe.

Takeaways

• 🔧 The task involves replacing the left front coil spring on a Hyundai Tucson.
• 🔩 Start by loosening the lug nuts, jacking the car up, and removing the wheel.
• 🛠️ Remove two 17mm bolts and a 19mm nut, along with the sway bar link's 19mm nut.
• 🚗 Disconnect the brake hose clip and the 10mm ABS sensor bolt.
• 🔑 Under the hood, remove three 14mm nuts, starting with the hardest one at the back.
• ⚠️ Caution is emphasized when compressing the spring using proper tools to ensure safety.
• 🔩 A 19mm nut is needed to remove the upper spring mount, with a heavy-duty bolt involved.
• 🛡️ The spring is damaged, and replacing it is essential to ensure the car's functionality.
• 🔩 Fit the new spring securely into the compressor, aligning it properly in the spring seat.
• 🔧 Reassemble the components, including the sway bar link, ABS sensor, brake hose, and wheel.

Q & A

What is the first step in replacing the left front coil spring on the Hyundai Tucson?

The first step is to loosen the lug nuts, jack the car up, and remove the wheel.

Which bolts need to be removed after the wheel is taken off?

Two bolts need to be removed: a 17mm bolt and a 19mm nut located on the sway bar link.

What additional components must be disconnected to remove the coil spring?

The brake hose clip and a 10mm bolt for the ABS wire must be disconnected.

Where are the 14mm nuts located, and why are they important?

The three 14mm nuts are located under the hood, and they need to be removed to release the top of the strut assembly, allowing access to the coil spring.

What safety precaution is advised before compressing the coil spring?

It is highly advised to use proper tools for safety, like a coil spring compressor, to avoid injury since compressing a coil spring can be dangerous.

What tool is used to remove the plastic cap and the nut securing the coil spring?

A 19mm socket is used to remove the nut after taking off the plastic cap on top of the coil spring assembly.

Why was the coil spring replaced in this particular case?

The coil spring was broken into two pieces, with the third piece missing, making it necessary to replace the entire spring.

How should the coil spring be fitted into the compressor?

The spring should be securely placed in the compressor, ensuring that the spring sits correctly in the designated markings on both the top and bottom.

What is the final step before reinstalling the wheel?

The final step is to reassemble the suspension components, including securing the sway bar link, ABS bracket, and brake hose, before putting the wheel back on.

What tools and sizes are primarily used during the coil spring replacement?

Key tools used include 17mm and 19mm sockets for the bolts, a 10mm socket for the ABS wire, and a 14mm socket for the strut mount nuts. A spring compressor is also essential for safely handling the coil spring.