𝐓𝐇𝐄 𝐅𝐈𝐑𝐒𝐓 𝐑𝐎𝐀𝐑 | Nissan Skyline R32 + V8 + ITB
Summary
TLDREl vídeo muestra un equipo de trabajadores dedicados a la construcción y mejora de un automóvil para una carrera. En los 9 días previos a la competencia, fabrican un tablero de aislamiento de fuego en aluminio, diseñan un alerón estilo drag estilo aluminio y trabajan incansablemente para completar la carrocería y el sistema de combustible. La narración captura los desafíos y logros de la fabricación de motores, la programación del ECU y la emoción de arrancar el motor por primera vez. La dedicación del equipo y su pasión por la mecánica se hacen evidentes en cada etapa del proceso.
Takeaways
- 🏁 Han contado con 9 días para la carrera y están trabajando intensamente para preparar el coche.
- 🔨 Se están haciendo firewalls de aluminio dentro del coche para proteger la cabina en caso de incendio.
- 🚗 Adam ha fabricado un cable de acelerador que conecta los cuerpos de la acelerador al pedal.
- 🛠 Se está trabajando en un alerón de estilo drag estilo 'D1' con aluminio, a pesar de las críticas de algunos.
- 🔩 Se utilizan remaches para unir las placas laterales con el alerón superior, siguiendo un estilo de aeronave.
- 🏭 Se planea renovar la tienda, cambiando el techo y refrescando el exterior con el logotipo.
- 🖼 Se pasaron 5 horas firmando 600 pósteres para los seguidores.
- 🛠 Se trabaja en varios aspectos del coche, como el sistema de combustible, los cables del motor y la construcción del firewall.
- 🚙 Se ha logrado dar forma lentamente al alerón y se está preparando para conectarlo con las placas laterales y el maletero.
- 🏎 El coche está tomando forma rápidamente y se espera que esté listo para la competencia en 7 días.
- 🎨 Se ha realizado una limpieza en la tienda y se está preparando para intentar arrancar el coche por primera vez.
Q & A
¿Cuántos días quedan para la competencia de carreras mencionada en el guion?
-Quedan 9 días para la competencia de carreras.
¿Qué material están utilizando para hacer los firewalls del coche?
-Están utilizando aluminio para hacer los firewalls del coche.
¿Qué es lo que Adam ha creado para el coche?
-Adam ha creado un cable de acelerador que opera los cuerpos del acelerador desde el pedal.
¿Cuál es la función de los firewalls que están haciendo?
-Los firewalls están diseñados para bloquear el maletero del cockpit del coche, para que en caso de incendio, este se mantenga en el maletero y no se propague al cockpit.
¿Qué tipo de ala están planeando hacer para el coche?
-Están planeando hacer una ala de estilo drag estilo Dr Wing de aluminio.
¿Cómo están estructurando la ala del coche?
-La ala está estructurada con placas laterales unidas con riel y un gran plato de aluminio con más riel.
¿Qué actividad especial tienen planeada para la tienda?
-Planean cambiar la parte superior de la tienda, poner su logotipo y comenzar a actualizar el exterior.
¿Cuánto tiempo les tomó firmar 600 pósteres?
-Les tomó 5 horas firmar 600 pósteres.
¿Qué están haciendo con el sistema de combustible del coche?
-Están soldando los raíles de combustible juntos para poder terminar el sistema de combustible.
¿Qué cambios han realizado en el coche en los últimos dos días?
-Han instalado raíles de combustible, inyectores y un sistema completo de combustible conectado con los depósitos de combustible.
¿Cómo se siente el narrador después de que el coche finalmente arranque?
-El narrador está emocionado y agradecido, y expresa que ha sido un viaje emocionante.
Outlines
🔨 Construyendo el coche para la carrera
El vídeo comienza con el equipo trabajando en un coche para una carrera. Se menciona que faltan 9 días para el evento y se están haciendo firewalls de aluminio para proteger el cockpit en caso de incendio. También se trabaja en un alerón de estilo drag estilo Dr Wing, aunque hay opiniones divididas sobre su diseño. Se muestra el progreso en la fabricación de los componentes y se destaca el esfuerzo del equipo, especialmente en la creación de los firewalls y el alerón.
🛠️ Preparativos finales y mejoras en el taller
El segundo párrafo habla sobre los preparativos finales del coche y las mejoras en el taller. Se ha trabajado en la instalación de tuberías de combustible y se ha completado el sistema de combustible. Además, se ha mejorado el aspecto del exterior del taller con un nuevo logotipo y una pintura gris. Se menciona la colaboración con Paku Racing y el trabajo en el alerón, que está tomando forma y se espera que agregue un toque visual al coche.
🎨 Detalles artesanales y pruebas de arranque
En el tercer párrafo, el enfoque está en los detalles artesanales del coche, como el acabado de los extremos de la escape de titanio y el trabajo en el alerón. Se intenta arrancar el coche por primera vez, pero hay dificultades técnicas que requieren ajustes adicionales. Se describe el proceso de sintonización del motor y la expectativa de lograr que funcione.
⏱️ Finalizando el vídeo y preparativos para el evento
El último párrafo describe el esfuerzo del equipo por finalizar el coche a tiempo para el evento en Altra. Se menciona que el coche finalmente se arranca después de un proceso complicado y se expresa la emoción y la satisfacción del equipo por lograrlo. Se promete que el siguiente vídeo se grabará en Altra, lo que implica que el coche estará listo para la carrera.
Mindmap
Keywords
💡Aluminio
💡Firewall
💡Cable de acelerador
💡Alerón
💡Rivets
💡Taller
💡Pauta
💡Cableado
💡Protección contra incendios
💡Montaje
💡Prueba
Highlights
Nine days remain until the car race.
Work on aluminium for car firewalls and a drag-style wing.
Adam made a functional throttle cable.
Plans to block the trunk from the cockpit for fire safety.
Designing a Dr Wing drag-style aluminum wing with aircraft-style rivets.
The shop is being refreshed with a new logo and paint.
600 posters were signed, taking 5 hours.
Various tasks are being performed in the garage, including polishing a car and welding fuel rails.
The wing is taking shape with metal forming and riveting.
The car's engine bay is almost complete with a new fuel system.
The firewall is being shaped and prepared for installation.
The car is planned to be taken to Altra for a special drift event.
The car's look is inspired by Abu Moon Team from Japan.
The exhaust system is being finished with titanium tips.
The car's oil pressure is built to ensure proper circulation before starting the engine.
The engine is started for the first time after setting the timing.
The car is successfully started after several attempts and battery changes.
The car is now working, and the video will be edited and published.
Transcripts
good morning people on the internet we have nine
days anyway we have 9 days till we go to out race less and less time so we have some
help today hi paku racing on board with some friends and the boys are working on
aluminium today and what we need to do from aluminium is some firewalls for inside of
the car I'll show you quickly oh Adam made a throttle cable that works papa papa papa
so the throttle bodies are now operated from the throttle pedal which is actually um very good move
as well and what we need to do from aluminium is some firewall inside the car paper firewall
basically what we're doing is we blocking the trunk from the cockpit of the car so the fire
if it starts it stays in the trunk it won't go to the cockpit right yes yes and also we are
going to do a beautiful uh Dr Wing drag style Wing drag style aluminium Wing I already know
that many people would comment now that this is stupid idea and they don't like it but we like
it yes for fabricator it's very cool stuff to do such a thing so so this is the side plate we're
going to use rivets to connect the side plate with actual wing on top like aircraft style
aircraft yes this is very much aircraft with this wheel gup so so on the side will be a lot of rets
and then a big aluminum plate with also more riets and sides will be bended and more rivets and more
rivets that's the plan I'm leaving the boys here cuz I need to sort out some things in the shop
and I'll take you along with me okay bucking shop this is probably the last day when the
shop looks like this because later today we're going to change the top of it we're going to
put our logo and start refreshing the outside of it and the plan for today is morning boys
hello what year what year have you been born huh what year
6,661 6,661 yes okay okay all good I don't know if you remember but we
uh did this action couple of weeks ago when we said we going to uh sign all the
posters that you guys buy so now we have 600 posters um to sign and whole morning
we spent signing posters so yeah let's do a bit of time lapse and finish the
[Music] [Applause] [Music]
job okay 600 posters we took us 5 hours to sign job is done so now let's what do we do we go eat
and then as a janitor of this building you go I need to clean here okay sorry okay back in the
garage everyone's doing everything it's basically so much going on inside I don't really want to
interrupt people with the camera I filmed some B so I can just say um what's going on basically
Boogie after he saw us working on Jimmy's Car last episode he decided he's going to give his car
polish so he's polishing his car Adam is working on fuel he's welding the fuel rails together so we
can finish the fuel system today Andrew is working with the cables he's doing engine wires everything
that's missing for us to start the engine finally Philip is working on the firewalls and also
the boys are doing the wing the wing is really taking shape slowly and I really love it [Music]
what this we are uh making this sheet of metal more stronger stiffer
uh while be rolling so metal forming by pressing it and then rolling makes sense
[Music]
okay it got late didn't feel much today we have this it might look like a table
but it's actually the wing the boys did a very nice job with the edges and shaping
the edges boys working hard yeah Andrew took out the harness to have it on the
table uh the firewall this part is on and there's also there's also this part here
um for now it's flat but the boy is going to do the same shaping as it's on this one and
we are now getting ready to connect the wing to the side plates and then onto the trunk
I'm not going to lie um last two days were very tough yesterday we finished at 1:00 a.m. day
before we finish at 3 and we didn't have much sleep because now is the time that 7 days left
till we go to Al and it's literally the last trade the last couple days we can push on with
this car to get it ready boom this is the car that in 7 days is going to be hopefully taken
to Altra and drifted on Next Level special event at alra and quickly covering the changes we did
for the last two days the engine bay is looking almost complete we installed the fuel rails fuel
injectors and a whole fuel system it's connected with the back of a car where you have fuel pumps
and Fuel Cell everything is connected we checked it yesterday the pumps are working
are pumping the fuel here and back we found one leak right here but we're going to fix it today
very quickly the whole system is made with vibrant components so we are pretty confident
everything is going to work very fine what we're missing here on the front of the engine is the
trumpets that we're going to make maybe today or tomorrow and engine harness Andre was working on
engine harness for the past few days as well it's pretty much ready the harness is ready it's just
need some connectors and we're going to install it maybe again today or tomorrow going to the
inside of the car I don't know if you know philli he helped us before build mini Kevin goart he has
vision and he has skills and tools to make that Vision into real life and when I told him I need
some work with aluminum with this car he said don't worry I'll come for to days and I'll help
you with whatever is needed and man the last two days these boys were working hard but the effects
are just mental starting with this the mission was to kind of block it from the side and from
the top so in case of potential fire it wouldn't get from the trunk here to the cockpit and also of
course a bit for visual effect so what the boys made from aluminium it's straight of a plane or
some kind of aircraft this is looking so cool aluminium plates pressed and formed with those
beautiful shapes that Philip just drew by hand and a lot of rivets to put it all together super
crazy stuff this is the stuff you see on like professional race cars drift cars super stoked it
looks absolutely amazing especially that you can see it from the back the look of a car is so much
different with this and when we're going to put some LEDs inside it's going to be looking super
cool we would never be able to make it ourselves so thank you very much Philip paku Racing for help
and going to the back of a car the last thing I posted some Instagram posts and I see that not
many people get it and like it but I find it so amazing so the whole build is inspired by Abu Moon
uh Team from Japan they all drift with 32 skylines they all super low super sexy and I'll put the
pictures here I'm sure you know them and they all rock these uh drug Wings it's basically a
big aluminium Wing again straight out of airplane and I see why many people don't like the idea and
don't get it but uh I had a vision from the day we bought this car that I want this car in Abu
Moon style I get that it's a bit controversial and many people don't like it but in my opinion
looks super sick it's going to work very nice with exhaust tips when we finish with them and
uh so if you want to write comment that you don't like it and it's ugly um feel free to do so today
being Thursday and next week Thursday we are leaving to ultra that means that we have one
week to finish this thing yeah let's see I'll try to film a bit more today so let's see how
it goes the first thing is first we need to put the sign up so we back at the shop and like I
said yesterday this place need to look a bit more like presentable presentable bit more like us cuz
when you look at me you just think presentable uh [Music] yeah so this is the sign that Adam
made for us what 3 four years ago we used to have it on a wall in our room but now obviously
we don't need a room anymore so we're going to put the sign on top over for the shop [Music]
[Music] we are going to paint the outside walls of the shop today we
bought some gray paint and should we do Transition yes wait so wait okay one 2 3
okay two layers took us an hour a bit longer because my gu boo yo a bit of situation with
uh spilling a bit of paint uh in front of our neighbor's door but we cleaned it
and them we cleaned it and we also cleaned their um floor so yeah I think it's fine and now let's
do the satisfying job of peeling the tape you're not are you Splash [Music] she okay this is where
we finished today this is looking good from here it's going to be only better man and
[Music]
Van good morning we cleaned around here so there's a lot of space in
front because what I want to do is get the car out from the lift and
today is the day when we're going to try to start this for for the first time [Music]
[Music]
[Music]
he [Music]
Def [Music]
okay good morning next day yesterday we didn't manage to start the car because it was just too
much of a work so the boys are continuing doing it now the car is back on the lift Kuba is finishing
with the exhaust he's installing the tips 100 one sorted us with very cool exhaust tips made
from titanium Kuba also I think just like heated up with a heat gun or something a flamethrower
just warm it up a lot at the end so it has this very nice blue to purple to I'll show you wait
it's it's this one so basically you heat up the the tip when it's titanium is going to get this
beautiful color blue to purple to kind of gold the tip is actually ready to weld it in so I'm
going to film that but also look at this detail so at the end I cannot be thankful enough to1
for doing the whole exhaust system this thing is out of this world yeah let's weld this one
[Music]
in firstly before we start the engine we're going to try to build oil pressure just to make sure
that the engine has a proper oil uh uh circulation what the boys will do is crank the engine but
without turning on the fuel pumps so the engine cranks but only for oil pump to start pumping the
[Music]
oil okay it's being it's been like 2 hours maybe 2 and a half from the last clip and
we still are in the same point where we're trying to set the timing we have some weird
issues with the ECU with the crank sensors and everything it's a freshly built engine
and um many things here we don't know from before so we trying to learn um while doing
it one more hour later we have set the timing we're going to try to start it now
show I didn't film it but it was something there was a little sign of Life little like
we're streaming for 10 hours already almost 10 people are going mental right now it's
happening though yes easy first try I I told you it's going to happen today first time
go
go okay so we're onto our third battery the other two died we're not drinking until
the car starts but I also want to go [Music] sleep be and [Music] goep okay let's continue
[Music]
so it was working but something is not ful yes maybe we can say that it worked you count it
as a success already uh no but I know success is just around the corner so I'm just getting
ready okay 3:00 we have oil pressure and we're going to start the car with oil
pressure and then probably go home cuz I still need to edit this video tonight
today there you [Music]
go look at this
yeah
Ser y
go yeah
oh sorry I cannot here you let me turn off my exhaust okay
[Music] hello it's actually getting bright now and I don't really know I I'm not the best person to
express my feelings I always had a like problem with it and what I feel is very hard to express
and I hope you enjoy the video and the whole journey with the car it's 3:30 a.m. I want this
video to be out today Sunday so if you watch this video in the day we posted we literally finish now
doing the car the car is working as you can hear and I'm going home to edit the video thank you
very much for watching and see you in the next one next one's going to be from Al okay you me [Music]
浏览更多相关视频
Megafactorias Lamborghini Murcielago Hdrip
132-Fabricando Made in Spain - Carrocerías para coches
mi REPARACIÓN más BARATA 😬 *preparamos el próximo rally con el SUBARU*
EP9: Not So Easy. Unseen Journey: Hector Bellerin
Motor diésel, ¿cómo funciona?
Curso de Mecánica - 01 - Introduccion a la mecánica automotriz
5.0 / 5 (0 votes)