TIG Welding X-Ray Hack! TIG Technique For Pipe Welding!
Summary
TLDRIn this Extreme Tech channel video, the host demonstrates how to weld a four-inch diameter pipe using a back purge technique for X-ray quality results. He shares tips on purging, using a heavy-duty torch, and maintaining the right temperature and amperage for the welding process. The video covers the importance of clean materials, proper beveling, and gap control. The host also explains the lay wire technique, back fit, and the use of different rod sizes for various stages of the weld, emphasizing the significance of each pass for a flawless finish. The video concludes with advice on post-weld cleaning and the importance of PMI, PT, and X-ray testing for quality assurance.
Takeaways
- 🔥 The video demonstrates welding a 4-inch x-ray quality pipe using a back purge technique.
- 🛠️ Welding is performed on 316L stainless steel, which requires specific techniques and equipment.
- 💡 The welder shares tips on purging the pipe with argon gas for 10-15 minutes at 30 liters per minute for optimal results.
- ⚙️ A heavy-duty torch from the 'Heavy Heated' brand is recommended for its ability to run hot without overheating.
- 🌡️ The video emphasizes the importance of preheating the pipe and controlling the heat input during welding.
- 🧰 The 'lay wire technique' is used for the initial pass, which involves keeping the wire inside and stretching the weld puddle.
- ✂️ It's advised to weld between tacks first and then cut and grind them out to improve efficiency and reduce oxygen contamination.
- 🔩 The welder uses a cup size 8/18/38 tungsten and an air-cooled torch for the process.
- 🛑 The video highlights the significance of pausing before tie-ins to ensure a smooth transition in the weld.
- 🏗️ For the hot pass, a 332 rod is used with 120-130 amps, focusing on stretching and controlling the weld puddle.
- 📈 The final cap pass involves three layers, with each pass overlapping the previous one by 50% to ensure a smooth and even finish.
Q & A
What is the main focus of the video?
-The main focus of the video is to demonstrate the process of welding a four-inch pipe using a back purge technique, with an emphasis on X-ray quality welds.
What is the significance of the 'magic number 30' mentioned in the script?
-The 'magic number 30' refers to the ideal flow rate for the purge gas in liters per minute, which is recommended for welding pipes of various diameters for optimal purge effectiveness.
What type of torch is recommended for the welding process described?
-The recommended torch for the welding process is a heavy-duty, air-cooled torch from the Heavy Heter brand, which can run hot without overheating like regular water-cooled torches.
What is the purpose of purging before welding?
-Purging before welding is done to remove oxygen and other contaminants from the weld area to prevent oxidation and porosity, ensuring a high-quality weld.
Why is it advised to weld between tacks before cutting them?
-Welding between tacks before cutting them is advised to increase welding efficiency by reducing the need to purge oxygen introduced by grinding, thus saving time and maintaining weld quality.
What is the 'lay wire technique' mentioned in the script?
-The 'lay wire technique' is a welding method where the welder keeps the wire inside the weld pool and stretches the pool side to side, which helps in controlling the weld and preventing gaps.
Why is it important to maintain a clean pipe surface before welding?
-Maintaining a clean pipe surface is crucial for achieving a high-quality weld as contaminants can lead to defects such as porosity and inclusions, which can compromise the weld's integrity.
What is the recommended amperage range for the hot pass in this welding process?
-The recommended amperage range for the hot pass in this welding process is between 120 to 130 amps, which is suitable for stretching and controlling the weld puddle effectively.
How does the welder ensure a smooth start and stop in the weld?
-The welder ensures a smooth start and stop by preheating the area, melting the rod, and using a technique that involves dipping the rod and feeding it side to side, which helps in creating a smooth and even weld.
What is the significance of the third pass in the cap of the weld?
-The third pass in the cap of the weld is significant as it covers any imperfections from the previous passes, maintains a straight edge, and demonstrates the welder's control over the arc and puddle, resulting in a visually appealing and high-quality weld.
Outlines
此内容仅限付费用户访问。 请升级后访问。
立即升级Mindmap
此内容仅限付费用户访问。 请升级后访问。
立即升级Keywords
此内容仅限付费用户访问。 请升级后访问。
立即升级Highlights
此内容仅限付费用户访问。 请升级后访问。
立即升级Transcripts
此内容仅限付费用户访问。 请升级后访问。
立即升级浏览更多相关视频
1G Plate Stick Welding | SMAW
How to stick weld: Flat Lap joint with 7018's
Solda TIG - Dicas iniciais para soldar alumínio
Stick Welding: #1 Beginner Mistake and How to Fix It
1G plate stik smaw | root pass ( cara ngelas posisi 1G degan cara tembusan)
BELAJAR LAS SMAW 3G / PF | Plate Stick Welding | Pengelasan Vertikal UP
5.0 / 5 (0 votes)