Cómo hacer un índice automático para TESIS en Word (Numeración en romanos y arábigos) APA - ISO
Summary
TLDREn este tutorial, Miguel Vela enseña cómo crear un índice automático en Word para una tesis, que también puede aplicarse a fotografías u otros trabajos en Word. Se discute cómo generar un índice, también conocido como tabla de contenidos, y cómo establecer la numeración de páginas con números romanos y árabes. Se ofrece una guía detallada para estructurar el documento, desde la selección de títulos y subtítulos hasta la actualización y formateo del índice, asegurando que cumpla con las expectativas del asesor o tutor.
Takeaways
- 📚 Crear un índice automático en Word para tesis o trabajos similares es el objetivo del video.
- 🔢 El índice, también conocido como tabla de contenidos, debe generar automáticamente el Word para ahorrar tiempo y esfuerzo.
- 🔖 Se debe seguir las pautas dadas por el asesor o profesor, incluyendo el formato de numeración y ubicación de las páginas.
- 🇷🇴 Las páginas preliminares, como el índice, deben estar numeradas en números romanos en minúscula.
- 🔢 Desde la introducción hasta los anexos, el numerado debe ser en números árabes, comenzando con el número 1.
- 📝 Se debe estructurar el documento en niveles, con el título principal como nivel 1, subtítulos como nivel 2 y subsubtítulos como nivel 3.
- 🔄 Al seleccionar los títulos y subtítulos, se les asigna un nivel en el esquema de Word para su inclusión en el índice.
- 🔗 El índice debe estar vinculado a las páginas correspondientes para permitir la navegación directa utilizando el teclado (Control + clic).
- 📑 Es importante actualizar el índice (tabla de contenidos) para reflejar los cambios y asegurar que todo esté en orden.
- 📐 La apariencia del índice, como la tipografía y el espaciado entre líneas, debe ajustarse de acuerdo con las especificaciones del asesor.
- 🔄 Al final, se debe habilitar el panel de navegación para facilitar la revisión y asegurar que el índice esté correctamente estructurado.
Q & A
¿Qué es un índice automático en Word y cómo se utiliza en una tesis?
-Un índice automático en Word es una tabla de contenidos que se genera automáticamente a partir de los títulos y subtítulos de un documento. En una tesis, ayuda a organizar y navegar por las diferentes secciones de la obra.
¿Por qué es importante tener un guía para el índice de una tesis?
-El guía para el índice es importante porque proporciona instrucciones específicas sobre cómo numerar las páginas, cómo se deben estructurar los títulos y subtítulos, y asegura que el índice cumpla con los estándares requeridos por la institución o el tutor.
¿Cómo se inserta la estructura completa de una tesis en el índice de Word?
-Para insertar la estructura completa de una tesis en el índice, se seleccionan los títulos y subtítulos correspondientes y se les asigna un nivel de importancia (nivel 1, nivel 2, etc.) en la vista de esquema de Word.
¿Qué son los niveles de títulos y cómo se asignan en Word?
-Los niveles de títulos son una forma de organizar la jerarquía de los encabezados en un documento. En Word, se asignan al seleccionar un título o subtítulo y ajustar su nivel en la vista de esquema.
¿Cómo se crea una tabla de contenidos o índice en Word?
-Para crear una tabla de contenidos en Word, se utiliza la opción 'Tabla de contenidos' en la pestaña 'Referencias', y se selecciona un estilo de tabla de contenidos para que Word genere automáticamente las entradas basadas en los niveles de títulos asignados.
¿Cómo se pueden navegar a través de las páginas de un índice en Word usando el teclado?
-Se puede navegar a través de las páginas de un índice en Word presionando la tecla Control y haciendo clic en el título deseado en la tabla de contenidos, lo cual llevará directamente al usuario a la página correspondiente.
¿Qué hacer si se notan vacíos o errores en la numeración de páginas en el índice de Word?
-Si hay vacíos o errores en la numeración de páginas, se puede ajustar la numeración manualmente o utilizar la función 'Actualizar campos' para que Word revise y corrija automáticamente las referencias de página.
¿Cómo se aplican los números de página en números romanos y arábigos en una tesis en Word?
-Seguidos las instrucciones del guía, se dividen las secciones del documento en Word y se configura la numeración de páginas para que las secciones preliminares usen números romanos en minúscula y las secciones principales del documento comiencen con números arábigos.
¿Cómo se desvinculan las secciones de página en Word para aplicar diferentes estilos de numeración?
-Para desvincular las secciones de página en Word, se selecciona la opción 'Saltar' en la pestaña 'Diseño', se crea una nueva sección y se desactiva la opción 'Vincular al anterior' en la configuración de la cabecera y pie de página.
¿Qué es la vista de esquema en Word y cómo se utiliza para crear un índice?
-La vista de esquema en Word es una representación visual de la estructura del documento que permite organizar y manipular los niveles de encabezados y su relación con el índice. Se utiliza para asignar niveles a los títulos y subtítulos y para verificar que todos los elementos deseados estén incluidos en el índice antes de su creación.
¿Cómo se actualiza una tabla de contenidos en Word después de realizar cambios en el documento?
-Para actualizar una tabla de contenidos en Word después de realizar cambios, se hace clic derecho sobre la tabla de contenidos y se selecciona 'Actualizar campos' y luego 'Actualizar toda la tabla' para que Word refresque la información.
¿Cómo se habilita el panel de navegación en Word para una mejor visualización del índice?
-Para habilitar el panel de navegación en Word, se va a la vista de esquema y se selecciona la opción 'Panel de navegación' en la pestaña 'Vista'. Esto permite una navegación más fácil y visual por el índice y el contenido del documento.
Outlines
😀 Crear un índice automático en Word
Miguel Vela presenta un tutorial sobre cómo crear un índice automático en Word para tesis, que también puede aplicarse a fotografías u otros trabajos. El índice, también conocido como tabla de contenidos, debe generarlo Word de manera automática. Se discute la numeración de páginas con números romanos y árabes, y cómo la estructura del índice puede variar según las necesidades. Se menciona la importancia de seguir las pautas proporcionadas por el profesor o tutor.
📚 Estructurando el índice con títulos y subtítulos
Se describe el proceso de seleccionar los títulos y subtítulos para incluir en el índice de la tesis, utilizando los niveles de títulos en Word. Se enfatiza la importancia de elegir correctamente los niveles para que el índice sea coherente y fácil de navegar. También se muestra cómo se puede ajustar la vista y el esquema para organizar mejor el contenido.
🔄 Creación y actualización de la tabla de contenidos
Miguel detalla cómo crear la tabla de contenidos en Word seleccionando los títulos apropiados y utilizando la función de tabla de contenidos en la pestaña Referencias. Se muestra cómo actualizar la tabla de contenidos y cómo usar el teclado para navegar rápidamente entre las secciones. Además, se menciona cómo corregir errores comunes, como la inserción accidental de niveles de títulos.
📑 Ajustes de formato y navegación en el índice
Se abordan los ajustes de formato para el índice, como cambiar la fuente y el espaciado entre líneas, y se explica cómo activar el panel de navegación para una mejor visualización y comprensión de la estructura de la tesis. También se sugiere verificar con el tutor que el índice cumpla con las expectativas y se presenta de manera adecuada.
🔢 Numeración de páginas con números romanos y árabes
Se explica cómo aplicar la numeración de páginas con números romanos en las páginas preliminares y con números árabes a partir de la introducción. Se detalla el proceso de seguir las pautas del tutor para la numeración, incluyendo la forma en que se deben numerar las páginas del índice y las secciones siguientes.
🚀 Finalización y publicación del índice
Para concluir, Miguel muestra cómo dividir el documento en secciones para aplicar diferentes estilos de numeración de página y cómo asegurarse de que las anexos no tengan numeración de página. Se actualiza la tabla de contenidos una última vez y se ofrecen consejos finales sobre el formato, como cambiar el tamaño de la fuente y el estilo de letra. Se cierra el video animando a los espectadores a suscribirse al canal El Tío Tech.
Mindmap
Keywords
💡Índice Automático
💡Tabla de Contenidos
💡Numeración
💡Números Romanos
💡Números Árabes
💡Palabra clave
💡Nivel de Encabezado
💡Secciones
💡Pie de Página
💡Anexos
Highlights
Tutorial sobre cómo crear un índice automático en Word para tesis.
El índice también conocido como tabla de contenidos, debe generar automáticamente el trabajo en Word.
Se discute la numeración o paginación relacionada con el índice, incluyendo números romanos y árabes.
Se menciona que el índice no se basa en estándares ISO, sino en lo que el caso requiere.
Se proporciona una guía para el índice, incluyendo la numeración de páginas preliminares en números romanos minúsculos.
Se describe cómo se inicia la numeración con el índice utilizando el número II en números romanos minúsculos.
Se explica cómo se numeran las páginas preliminares con números romanos y las páginas posteriores con números árabes.
Se detalla el proceso de inserción de la estructura de la tesis en el índice utilizando niveles de títulos.
Se muestra cómo seleccionar y asignar niveles a títulos y subtítulos para su inclusión en el índice.
Se describe cómo crear la tabla de contenidos o índice automáticamente en Word a través de la pestaña Referencias.
Se destaca la funcionalidad de navegación del índice con el uso de la tecla Control para ir directamente a las páginas específicas.
Se menciona cómo eliminar elementos innecesarios del índice y cómo ajustar los niveles de los títulos.
Se explica cómo actualizar el índice para reflejar los cambios en la estructura del documento.
Se discute la adición de elementos faltantes en el índice, como el resumen y el abstract.
Se muestra cómo personalizar el formato del índice, incluyendo la tipografía y el espaciado entre líneas.
Se describe cómo habilitar el panel de navegación para una mejor visualización y revisión del índice.
Se detalla el proceso de numeración de páginas con números romanos y árabes según la guía proporcionada.
Se explica cómo dividir el documento en secciones para aplicar diferentes estilos de numeración de página.
Se menciona que los anexos no tienen numeración de página, siguiendo las instrucciones del guía.
Se concluye el tutorial con una revisión final del índice y su actualización para asegurar que esté completo y correctamente formateado.
Transcripts
What's up friends, how are you? I hope that very good. I am Miguel Vela and today we are going
to learn how to create an automatic index in Word for thesis, this can also be used for your
photographs or any other work that has been done in Word, the index is also known
as a table of contents and We have to do it in a way that automatically generates Word,
it has to do the work for you, also look, we are also going to create the numbering or pagination
, obviously it is linked to the index and many times it goes with Roman numerals and Arabic numerals
, the index will not be based on layer or iso standards depending on your case with this video you don't have
to have any doubts well let's start with this look I have a job here and obviously
your thesis advisor or your teacher or tutor doesn't have to give you that I could say the guide, look,
he has to give you something similar to this, I want you to see here, look, this is the guide only for
the index, this your professor has to give you, I don't know, your thesis advisor, the one teaching you don't
look let's read a little here he tells me this is for the index look at the page numbering in the
lower right margin ok it will go to the right and at the bottom second point numbering of
preliminary pages in Roman lowercase ok look at the numbering of Preliminary pages will be in
roman and lowercase, not in consecutive order, the cover lists us and begins by listing the
index, that is, we are going to begin by listing the index with two in Roman lowercase, look at the third point, the
introductory numbering up to links with Arabic numerals, starting with one says in independent numbering
of preliminary pages, that is, we are going to start with the introduction but with number 1 and
look at the last one, the annexes do not have page numbering this is the guide to elaborate the index b
well we are going to start with this look I have it here my document in Word and we first the first
thing we are going to do is insert look insert the entire structure of our thesis in the index
obviously much many times many times also in my case, for example, they give you the structure, no, for
example, I want the teacher to tell you or your advisor, I want it to be that way, not when he tells you
that, that is, you already have a very clear objective, not everything is structured what should go in
the index in my case they gave me an image so it should stay as it is no and obviously
here obviously redirected each title subtitle to its page number ok let's start at
once let's start at once and look at us to create our table of contents or index we
are going to do it in the following way we are going to go to each little tab seen in our word we are going to
go to the tab it is seen in our under word and on the left hand side we are going to go here where it says
scheme ok let's go to scheme and look here we are going to have our work in such a way that you don't
worry it will seem a bit messy but here we are going to create the automatic index automatic eye
so that you understand me a little more look at the index that work by levels we have
level 1 which would be the main title to call it without level 1 main title level 2
would be the subtitle obviously not the title and level 3 would be the subtitle of the
subtitle in this case it does not work by levels if you select level one it will
always appear on top and further to the left if you select level 2 obviously it will
be the subtitle and so on well with this concept look we are going to work here we look
here we have you could say look at all the titles that we want to go as
main titles don't look up here up to the levels here look we just selected from bell
1 level 2 level 3 for example we're going to start with this well I'm going to go down and summarize I'm going to
select it and look it's already at level 1 k but he selected level 1, I want this to go in
the index of my thesis introduction he selected it look he selected it and I put level 1, everything which
is also at level 1 look at everything that is superfluous and you can click twice to put
it in order look at 12 and it will close all the text that is in the introduction everything is click and it
reopens for me look at all this it encompasses no but look here look here methodology is also level
1 we select here and we put level 1 look now yes I am not going to delete this twice click
and look I already have level 1 here and introduction level 1 methodology, this approach that comes here would come
to be level 2 no then we select it and we put level 2 because we selected it and we
put level 2 ok let's keep going down let's keep going down here I have results and discussion
look I'm going to select it and this is level 1, level 1 like that simple look just select
the main titles and the subtitles no let's see we're going to keep going down we're going to keep going down
here I have conclusions it's also level 1 there we have it I'm going to continue downloading recommendations
it's also level 1 look Let's see and I think that reference annexes is also level 1 and we are going
to continue going down and even nexus, look at level 1 and even some are already ok yes it is already there is no
problem that is if they already have level 1 there is no problem ok but the only thing we did here look is to
select is to select the main titles no and the subtitles as level 2 main title
a level 2 subtitle if you want to put a subtitle of the subtitle obviously it will be level 3 just
look we are going to close here we are going to close where it says close schematic view one click here we close and
now we are going to go where we want to put the index in this case I already have the page it is going
to be page number 2 with the index that can be deleted we are going to delete it well we are going
to delete and we are going to go here the tabs references references a click there and we are going to look for this this
tool that says table of contents we are going to click there and we are going to heat
the content 1 eye we have to look for this tool that says table of contents in
I don't know if in other versions these references can search tabs by tabs if they
don't find table of contents in references and surely that's going to be table of contents,
but in office 365 it is found in references a click on the table of contents and we click on the
first one here and see that the table of contents or the index has just been created
automatically we already have it there and with the control key look look here until my keyboard
The good thing about indexes is that with the control key you can go to the page you want, press
control and look, I'm going to click on the annex and it automatically sends me an annex when you
export this word ap the index also works with control, that is, press control and one click
and you go directly to the specific sheet, not in this case conclusions, again he explained to them, for
example Ctrl and you go to results and discussions, one click and we are already looking at the results and
conclusions eye but it's not over yet it's not over yet I want you to observe that here look it has just been
strained it has just been introduced without us noticing as I go Peru and here deere and all
that not for you to eliminate this look we can do as follows these two have
just been entered automatically because they were at level 1 many times that happens when
you copy text and it already comes with a level 1 format no but there is no problem look we go
here and don't forget ry very low but we are going to view and how is the start look
how is page 1 then it will base the start little view tab and we are going to outline a click
on outline look we are going to start from the first page we are going to search look here up
to r normally the levels always have to the right look to the right this is this circuit
more with less not just select them look at them select all select them all and see
that it is as level 1 then we select it and put independent text, click there and
see that the plus disappears Ctrl C also this little circle with one minus and one plus that you see
that means that it is inside the table of contents they select it or the index inside the
index they select and simply that the level removes it and they put independent text on
it one click well it's already disappeared if you want to have more order click here too and look at cadiz
on level one they remove it, but even if it doesn't have text but only so that it has it more orderly that
does not have text allows independent text and it disappeared again Moyobamba Peru that I
also know in the index they select everything and go here to level 1 and we put independent text
or game in one click oh and with that the little circle has already disappeared yes realize that there we are going to
go down we are going to go down look until summary twice click and we have it in such a way no now yes let's see let's
see twice click on summary there we have it that more let's see let's see let's see see I think it's fine there
after that we're going to close schematic view close and look we're going to go here and we're going to update as we
update right click update campus ok update fields and we update the whole
table right click update fields and we update to update the entire table we accept and look now
look now our our table of contents and it already has a summary introduction type approach and all
that here in content to the last one they can put king is obviously that they can put this
in the center they can put bold color as you want but it still doesn't end there oaxaca
missing for example abstract missing let's put abstract abstract what is there change because the
change prevents structure here we have the non-abstract abstract this is missing ok and
2.3 is also missing which is procedure of collection of information we are going to put abstract first, let
's see the abstract we have it here look we are going to upload this we upload it a little bit and the astra
e this is after summary we go to vista de sanità vista we go to scheme and after
summary here even look here it is even abstract we select it and we put level 1 now look at
this consummation or level 1 now be with sums let's see let's close scheme we close schematic view
and update this tablet again right click update fields update
the entire table and we accept look that now and it's here no and obviously it throws me with its
page number but I still need to put the arabic numbers and roman numerals roman or gay still
missing that look, 2.3 is missing, 2.3 is missing, let's see, change in the two
information collection procedures, ok, we are going to go to the track, here, see the diagram again, click on the diagram and we are going to
go down to see 2.3, here it is also here it is also 2.3 stop to locate it ok there we have it this
is this would be level 2 gay because it is a level 2 subtitle look that now it does have
its little circle and the most not to group the text and to develop add ok twice click look against
all the text twice click enlarge many times latex works in another way that is against
is all the text look against this of the text against is against time and in this way we have
organized the information in such a way way only if we want to see for example introduction twice
click and we see that there is in introduction not for this work first for level 1 after level 1
and for example you expand methodology twice click and start to put levels 2 for example as it
is here don't look how it is here you can also choose only the universe see well and this is what
we have here look what we have here we are going to close view one click is what we have in our
index right click update fields update the entire table and we accept look now yes our
index is already complete the type of letter that they ask you here they select them the recommended
is that the selections ok you select them all you go here and put for example arial and we are going to
give you 12 an example you would not do 2 the line spacing we also find it here look one click here and
you can put it do not look 2.0 1.5 1 it depends on what your advisor asks you you cannot also give line
spacing options here one click and here look here you give it here interlined then give us 1.4
depending on what they ask you have to ask sometimes or you accept and we have the index here well
look what we are going to do now is enable the navigation panel so that you can observe well let's go
to go back here the little view tab a click and after that again to scheme a click on scheme
I want you to observe when we click on scheme we are now in the scheme tab but on the
right again we have list we click on view and look here it is the navigation panel a
click we are going to give there I want you to observe that on the left it also appears to you look also
in this case the index does not appear and you can navigate freely in the index ok this is what
normally r check with your advisor that this index or this navigation panel is fine as you can
see here we have a space look after abstract we don't click there and look here we are going
to have the following we click there a click here and again don't forget no forget that here in
the diagram look look we are here we are in view do not get confused out that we have a view and here
we also have a diagram another diagram click here and look here in this empty space you have
to give the independent text a click and from that way the empty space disappears look
at the empty space if you click twice for example I'm going to put level one here we're going to put
level one here look that here it also begins to be added ok it begins to be added so how do
we remove it one click one click and we go here level one a click and independent text look disappears a
click goes to level 1 up level 1 and we give it an independent text that way control to
the left of the navigation panel is The navigation panel is what your thesis advisor checks, not
that it is well structured and obviously that it redirects you to where it is defined, no
conclusions, obviously it will lead to conclusions twice, click if they have gaps, the same thing, for
example, click here, for example assuming that seriously it would be a void one click independent sex
and here independent text ok level 1 for example look there we have a void in your navigation panel
you click and it will get you level 1 one click and independent text and it disappears well let 's
close now yes the view scheme close view the scheme and again look here to the left
and now we also have the panel no there is no problem we can also work with this
but in index in index we still need to fix what would be the little numbers not the
page number we are going to insert the page number first we are going to click here twice look 1 2 and
I want you to notice that here it says footer here we are going to insert obviously the pagination or the footer
we are going to work look with two types of numbers ok we have the arabic numbers to
the quick I think that is how it is written that is equal to 1 2 3 4 5 what we know normally no and the
romans that would come to be equal to 1 2 3 and 4 and so on ok here we have to guide ourselves
obviously I had already told you about the guide that your advisor gives you tell me page numbering in the
lower right margin we are going to start with the Arabic numbers look at the lower margin right that
is with 1 2 3 4 5 6 as we insert again twice click here in the footer of any
page twice click we go here headers and footers and to the left
look to the left we have page number one click at the end of the page and we put one that
is on the right look it says number without format 3 here we are going to select it ok end of page 3
because it is on the right automatically twice click I already have look I already have the little number e l
little page number not to the lower right margin to the lower right margin the first
point to see I am going to close this the second point you ask me preliminary page numbering
romans ok lowercase romans and lowercase with a correlative order the title page is not numbered and it
starts by numbering the index with two for roman, that is, we are going to number with roman here in the index
with the number two or that we are going to write it down here, look, we are going to start with roman index 2, ok, as far
as it goes in romans, look as far as you can see romans here it tells me the numbering of pages in the
romans and numbering from introduction to annexes look bone numbering from introduction to links
with arabic numbers it is telling me introduction introduces arabic numbers ok how far does it go
now friends numbering introduction to annexes ok then introduction annexes goes
to be arabic it is not 1 2 3 4 5 6 but it starts at one look starting at 1 that is introduction it is
going to be number one ok then romans it goes from and the index up to the introduction, no
, but the introduction already begins with the number one well, so what we need, look,
we need to put Arabic numerals and Roman numerals, divide the document in two or
, for example, index, look, from the index it goes up to here, I mean look at those three pages
what is an index what is a summary and what is abstract look I am going to paint it
black all these three pages are going to be roman numerals so what I need look what
I need is to divide is to divide look at the abstract page of the introduction page that is to say that they are
two independent pages I am going to close this gay that they are two independent pages ok look
I am going to go here I have a little program and I am going to explain it quickly here look here I have
the page here I have the abstract page and the introduction page from here to the right
will be with Arabic numerals 1 2 3 4 5 from introduction to the left will be with romans
not roman social c on 1 with 2 and so on what we need is to divide
the introduction abstract the divisions are done well in the divisions are done with sections and we do it
in the following way if I want to divide the abstract introduction then I place myself on
the page where page in this case on the first page not in austral not in introduction in ok here
and I'm going look I'm going here there will be a layout if I go to the little tab layout I'm going to skip and
go here next page but first look twice click look here it says footer footer
up and it is header and header that there are all the pages it says the same thing twice
click now if we go to disposition jumps one click on jumps and we go to the next page one
click to see again next page and look what is happening apparently nothing has happened
again click twice and see that now page 1 section 1 appears but on the right we already
have page 2 section 2 which creates one ction and create or divide another section is simply
disposition well disposition jumps and you give it here where it says next page in this way
you are dividing a section and you are creating another section but we are going to upload that text first
why it has gone down there is no problem what we go up and now what we are going to do is the following
twice click look here it says footer section two we are going to unlink it to walk header the
footer this option that says link to the previous one ok we give it a click the team will we remove
well we remove a click and in this way and we have already unlinked section 2 from section 1 now
everything you do look at section 2 look at section 2 will be created in all sections 2
will only have an effect in the sections 2000 in the text here the text that I just inserted
only in section 2 but section 1 look in section 1 it doesn't change anything anymore you realize
that text is no longer in the section but if I put a text here look n that it only takes
effect in section 1 ok that way we create the sections again let's see I'm going to
go back again let's see the following let's see if I can go back I think it was
here again look we're here in the abstract we're going to divide this page of this page we
go to the page that is on the left here we go to sorry sorry disposition jumps and
next pages one click there is twice click look we already have the two sections section 1 and section 2
and now yes on the next page we unlink this option that says to link with the previous
one we remove it ok and that would be practically everything now we are going to change look we are going to change
the format here twice click and we are going to go here to page numbering and we are going to format
the page number page one click there is here in number format we are going to click on it and we are going to
change it to roman numerals in lower case we accept and I want you to observe that we already have
look that we already have e l 1 the 2 and up to 4 look from the introduction from
the introduction number 5 already begins number 6 does not but be careful here it tells me here it tells me look the annexes do not have numbering
the preliminary page numbering is the cover it lists us that is this cover it doesn't have to have
this number but if I remove it look I automatically removed it is removed from everyone and
that's what I don't want control z so I have to divide again look I have to divide
this page again look at this page in two or this is it to be a section that from
here is going to be another section we do exactly the same we place ourselves if I am going to divide those
two pages we place ourselves in the first one on the left one click here look we go to disposition
jumps and next page ok click twice and look that now it says section 1 section 2 and the
introductory one already starts at section 3 and it is no longer section 2 now section 3 we have three sections
and we go to the next page here on the right and we unlink ok we unlink it link
with previous we remove it we remove it and here and here we eliminate this we eliminate look we eliminate and it no longer has
an effect on the other pages no no longer has an effect there is no problem there is no problem twice
click and that way we no longer have the cover in numbered no and as the last point as the last point
to see he asks me here the annexes do not have page numbers although the annexes do not have
page numbers the annexes are last because they are here annexes look here is the page
so again we have to divide look again we have to divide here
annexes here annexes divide create a section here independent from the left then we do the
same thing look we are doing practically the same thing we go to the page on the left
disposition jumps and following pages click twice we go to the page of the right one click
here and it unlinks two we remove the link that we remove with one click you remove or gay one click
link and a click a click to see to see to see a click you remove it, now yes if you delete look now
yes if you delete this it no longer has an effect and that would be practically all of us we are going to update our
index here well we are going to update our index right click current be fields update the entire table
and we already have it there not to all this the selected with this area they put it number 12 they put it in bold
if you want you can remove it from bold and obviously you can put a line spacing that you want and
look we already have our 26 table of automatic content and in this way it would be practically
all if you have any questions to see comment me to read you and answer you again with me
it will be up to here do not forget to subscribe to the El Tío Tech channel, see you until next time.
5.0 / 5 (0 votes)