Armadio a muro fai da te con ante IKEA pax

TK8177

28 Feb 202213:16

Summary

TLDRIn this DIY video, the creator demonstrates how to build a custom wall-mounted wardrobe using three IKEA doors. They start by measuring the space and using a laser measure for precision, then design the project in Fusion 360. The process involves cutting the doors to fit, using steel plates for hinges, and painting with a durable, scratch-resistant paint from Leroy Merlin. The assembly includes attaching wooden frames and shelves, ensuring a perfect fit with a laser level. The final step is sealing gaps with acrylic silicone for a seamless finish.

Takeaways

📏 The video demonstrates how to measure a wall space accurately using a laser measurer to ensure the walls are square and to determine the dimensions for the custom wardrobe project.
🛠️ The creator used Autodesk's Fusion 360 software to design the wardrobe, but notes that a simple school ruler and paper could also be used for the design.
📐 The main measurements considered were the combined width of two IKEA doors and the height, which needed to cover a space of about 1 meter and 4 centimeters, respectively.
🪵 The decision on the width of wooden slats was based on the remaining space after accounting for the wall thickness and the door's coverage.
🔪 The long wooden slat was planned to be cut into two parts for easier transportation, with the cut made at the central batten to hide the cut when assembled.
🚪 The upper doors were derived from a single door cut in half using an alternative saw and then measured and cut to fit at a Bricofae for a total of 3 euros.
🔄 To restore the finish of the upper edge of the door after cutting, edge banding rolls were used, which were then heated and applied to the door with an iron.
🔩 The video describes creating a housing for the hinge by using a special drill bit called a Forstner bit, ensuring the depth matches the IKEA panel and stopping in time to avoid marks.
🛠️ The creator used a level to ensure the alignment of the hinge holes and used a square to maintain a 90-degree angle for the hinge installation.
🎨 After assembling the wooden frame, the creator chose a specific paint from Leroy Merlin designed for wood, which is also suitable for environments with strict hygiene standards like restaurants and kitchens.
🔨 The final assembly involved attaching the wooden frame to the wall using specific wood screws, ensuring a secure fit, and then connecting the three crossbars with steel-zinc plates.
📐 The use of a laser level was crucial for aligning the shelves and supports to ensure they were perfectly horizontal and vertical.

Q & A

What is the main purpose of the video?
-The main purpose of the video is to explain how to assemble three IKEA doors to create a wall-mounted wardrobe.
What tool did the creator use to measure the wall cavity?
-The creator used a laser measurer to ensure greater precision in measuring the wall cavity.
What software did the creator mention for designing the project?
-The creator mentioned using Autodesk's Fusion 360 software for designing the project.
What is the total width of the two doors combined in the project?
-The combined width of the two doors is 49.5 centimeters, which is approximately 1 meter.
How did the creator address the issue of transporting the long wooden slat?
-The creator planned to split the long wooden slat into two parts to make it easier to transport in a car.
What was the process for creating the top part of the door?
-The top part of the door was created by cutting a single door in half, using an alternative saw, and then cutting it to size at a Bricofèr for 3 euros per cut.
Why did the creator use a special bit called 'bonta forstner'?
-The 'bonta forstner' bit was used to create a circular housing for the hinge on the wooden panel, ensuring a precise fit for the hinge.
What type of paint did the creator use for the doors?
-The creator used a specific paint for wood from Leroy Merlin, which is designed to be both decorative and resistant to scratches and impacts, suitable for environments like restaurants and kitchens with HACCP standards.
How did the creator attach the wooden slats to the wall?
-The creator attached the wooden slats to the wall using specific wood screws and a laser level to ensure a secure and straight fit.
What material was used to fill the gaps between the frame and the wall?
-A special acrylic silicone was used to fill the gaps between the frame and the wall for a clean and hygienic finish.
How were the shelves and supports for the shelves created?
-The shelves and supports were created using wooden slats fixed to the wall with screws, ensuring proper depth and spacing for the shelves to fit snugly.

Outlines

00:00

🛠️ Custom Wall Wardrobe Assembly

The video begins with the creator explaining how they assembled a wall wardrobe using four IKEA doors. They first measured the wall to ensure the wardrobe would fit, using a laser measure for precision. The creator used a design program, Autodesk Fusion 360, to plan the project, although it's noted that a simple school ruler and paper could suffice. The main focus was on the width of the two doors together, which needed to cover approximately one meter, with some leftover centimeters to account for the wall's thickness and the door's overlay. The top and bottom lengths were also considered, with the top piece being split into two for easier transportation. The video includes a music and applause segment to engage the audience.

05:00

🔨 DIY Door Restoration and Hinge Installation

In the second paragraph, the focus shifts to restoring the upper edge of the door, which had lost its finish during the cutting process. The creator uses a meranti veneer roll, a type of wood layer, applied with a Casey Shaw adhesive iron to recreate the door's edge. After attaching the veneer, it's carefully trimmed to match the door's shape. The video then moves on to creating a housing for the hinge. The creator uses a Forstner bit, a woodworking tool, to carve a circular housing in the wood panel, ensuring it matches the depth of an IKEA door panel where the hinge will be attached. The process involves testing the fit of the hinge and marking the screw holes for alignment. The door is then painted with a specific paint for wood from Leroy Merlin, suitable for kitchens and restaurants, making it resistant to scratches and wear.

10:02

🏠 Wall Mounting and Shelves Construction

The final paragraph details the assembly of the custom wardrobe. The creator attaches wooden battens to the wall, ensuring the measurements are accurate and using wall plugs for secure attachment. The doors are then mounted using specific wood screws. A level laser is used to ensure the framework is perfectly vertical. The creator also discusses the construction of shelves, using wooden battens fixed to the wall with screws, and the importance of leaving space for the shelf edge to fit snugly. The gaps between the framework and the wall are filled with acrylic silicone for a seamless finish. The video concludes with a reminder to ask questions in the comments and to stay tuned for more content.

Mindmap

Keywords

💡IKEA doors

IKEA doors refer to the pre-fabricated door panels that are commonly used in furniture and home improvement projects. In the video's context, the creator uses three IKEA doors to construct a wall-mounted wardrobe. This is an example of repurposing IKEA products for a custom furniture project, showcasing creativity and resourcefulness.

💡Laser measure

A laser measure is a tool that uses a laser beam to accurately measure distances. In the video, the creator uses a laser measure to ensure precision when taking the dimensions of the space for the wardrobe. This tool is crucial for ensuring that the custom-made wardrobe fits perfectly within the designated area.

💡Fusion 360

Fusion 360 is a 3D CAD, CAM, and CAE software developed by Autodesk. It is used for creating and modifying 3D models and designs. In the script, the creator mentions using Fusion 360 to plan the wardrobe project on paper, indicating the use of advanced design software for precision and visualization of the final product.

💡Wooden slats

Wooden slats, or battens, are thin strips of wood used for various purposes in carpentry and construction. In the video, the creator decides on the width of the wooden slats based on the remaining space after accounting for the door's width and the wall's thickness. These slats are essential for constructing the framework of the wardrobe.

💡Cutting

Cutting, in this context, refers to the process of physically dividing materials, such as wood or doors, into specific sizes or shapes. The script describes cutting an IKEA door in half and then cutting it to fit precise measurements, which is a fundamental step in customizing the wardrobe to fit the space.

💡Bricofer

Bricofer is an Italian hardware store chain. The creator mentions going to Bricofer to have the doors cut to size for a small fee, illustrating the convenience of using local resources and services for specific tasks in a DIY project.

💡Meranti veneer

Meranti veneer is a thin layer of wood that is used to cover or decorate surfaces. In the video, the creator uses meranti veneer rolls to restore the finish on the edges of the cut doors. This step is important for achieving a polished and professional look for the custom wardrobe.

💡Forstner bit

A Forstner bit is a type of drill bit used for drilling flat-bottomed holes. The creator uses a Forstner bit to create circular housings in the wooden panels for the hinges, demonstrating a precise technique for fitting hardware in woodworking.

💡Hinges

Hinges are mechanical devices used to connect two objects, allowing for the rotation or pivoting of one around the other. In the context of the video, the creator carefully selects and positions the hinges to ensure the doors of the wardrobe open and close smoothly, highlighting the importance of choosing the right hardware for functionality.

💡Assembly

Assembly in this context refers to the process of putting together the various components of the wardrobe. The creator assembles the wooden slats, frames, and doors, ensuring they fit correctly and securely. This step is crucial for the structural integrity and final appearance of the custom-made wardrobe.

💡Sanding and painting

Sanding and painting are finishing processes used to smooth and color the surface of wood. The script mentions sanding and painting the wooden parts of the wardrobe to achieve a smooth finish and a uniform appearance. This step is essential for enhancing the aesthetic appeal of the final product.

💡Silicone sealant

Silicone sealant is a type of adhesive used to fill gaps and create airtight and waterproof seals. The creator uses silicone sealant to fill any gaps between the wardrobe frame and the wall, ensuring a clean and professional finish, as well as preventing any potential issues with moisture or dirt accumulation.

Highlights

The video demonstrates how to assemble three IKEA doors to create a wall-mounted wardrobe.

The process begins with measuring the width and height of the space to ensure the walls are square.

A laser measure is used for increased precision in taking measurements.

Fusion 360 by Autodesk is mentioned as the software used for the project design, though it's not mandatory for such a project.

The total width to be covered by the two doors is measured to be 49.5 centimeters.

The leftover width of 4 centimeters is considered for the wood slat width.

The height of the wood slat is planned to be split into two parts for easier transportation.

Upper doors are derived from a single door cut in half using an alternative saw and then measured at a hardware store.

The edges of the cut doors are finished with a veneer to restore the appearance.

A special bit called a Forstner bit is used to create circular housings for the hinges.

The depth of the wood panel is measured to match the hinge thickness of approximately 12-13 mm.

A trial is conducted on a spare panel to ensure the proper alignment of the hinge holes.

The IKEA panel is used to create a custom door with a single panel.

The door is painted with a specific paint for wood from Leroy Merlin, suitable for kitchens and restaurants.

The paint is chosen for its resistance to scratches and abrasions, complying with HACCP standards.

After painting, the wood slats are assembled to form the frame, ensuring proper measurements.

Wall holes are drilled for mounting the frame securely with specific wood screws.

A leveling laser is used to ensure the frame is perfectly aligned with the wall during assembly.

Shelves and supports are created following the guidelines of the leveling laser for precision.

Wood slats are fixed to the wall to create supports for the shelves with an exact depth.

The shelves are adjusted to fit perfectly, leaving a small gap for the shelf edge.

Any gaps between the frame and the wall are filled with acrylic silicone for a seamless finish.