Tutorial Penggunaan Dental Unit

Summary

This instructional video provides a detailed guide on how to properly disinfect, operate, and maintain a dental chair and related equipment. It covers steps like setting up the compressor, filling the dental cat with mineral water, and ensuring the proper function of buttons and controls for tasks like adjusting the chair, activating the light, and using the handpieces. The video emphasizes cleaning procedures for the equipment, ensuring everything is properly disinfected and ready for the next use. It concludes with instructions on securing the equipment, including disconnecting power and performing final checks on the dental care system.

Takeaways

• 😀 Make sure to disinfect the dental care equipment before use.
• 😀 Connect the power supply and turn on the compressor when needed.
• 😀 Ensure that the water suction is off before removing the bottle from the dental care unit.
• 😀 Always use mineral water for filling the dental care bottle.
• 😀 When filling the dental care bottle, ensure that the water suction is active and the bottle feels firm when pressed.
• 😀 Press the power button to turn on the dental care unit and the lamp by pressing the lamp button on the panel.
• 😀 The panel has several buttons for functions such as water dispensing, hot water, rinsing, and controlling the dental chair position.
• 😀 The dental chair has controls to adjust its height, backrest, and tilt for optimal patient positioning.
• 😀 The dental instruments, including high-speed and low-speed handpieces, should be placed in their designated spots, along with the ultrasonic device.
• 😀 After use, clean and disinfect the suction devices, and make sure to clean the sputum and sanitize it properly.
• 😀 Always turn off the dental care unit, ensure all buttons are off, and disconnect the power supply when finished.

Q & A

What is the first step in preparing the dental equipment?

The first step is to disinfect the dental equipment and ensure that it is safe to use.

How do you know when the air suction is functioning correctly in the dental system?

The air suction is working correctly when you hear the sound of air flowing, and the valve cover turns as expected.

What should you ensure when filling the dental bottle with water?

Ensure that the water suction is off before releasing the bottle, and check that the bottle is not hard when pressed to confirm the suction is off.

What kind of water should be used in the dental system's bottle?

Only mineral water should be used in the dental bottle.

How can you activate the light on the dental unit?

To activate the light, press the light button on the panel and toggle it to the left or right.

What are the functions of the different buttons on the panel?

The panel buttons serve various functions such as releasing water into the cup, dispensing warm water, rinsing, activating the light, viewing X-ray results, and adjusting the dental chair's height and position.

What should you do with the handpiece after use?

Place the handpiece in its designated holder after use. There are different holders for the tri-way syringe, high-speed handpiece, low-speed handpiece, and ultrasonic tool.

What is the function of the foot control pedal (W) in the dental system?

The foot control pedal (W) on the left side controls the water supply to the handpieces.

How should the suction system be cleaned after use?

The suction system should be cleaned by rinsing with water and then disinfecting. If there is heavy contamination, it can be scrubbed with a toothbrush.

What should you do after finishing work with the dental chair?

Ensure that the dental chair is in its normal position (highest position), turn off all equipment, including the power and light, and disconnect the compressor and power plug.