SERVIS CVT BEAT FI ESP LENGKAP, CARA MEMBERSIHKAN CVT MATIC.

Summary

This tutorial video walks viewers through the process of servicing a CVT (Continuously Variable Transmission) at home. It covers everything from disassembling the parts, cleaning the components, and applying proper lubrication to reassembling the CVT carefully to ensure longevity. The presenter emphasizes the importance of using the right cleaning materials, maintaining the integrity of seals and components, and ensuring that all parts are correctly assembled. The video also highlights key tips, such as handling delicate parts and performing routine maintenance for optimal CVT performance. The guide is easy to follow, with clear instructions and a focus on safety.

Takeaways

• 😀 Start by cleaning the CVT using a T8E key and remove the components carefully.
• 😀 Be cautious when handling the CVT parts to avoid damage, especially the rubber seals.
• 😀 Use dish soap for cleaning the components, as it’s gentler and helps preserve the rubber parts.
• 😀 After cleaning, ensure the parts are dry; using a compressor helps, or you can air dry them.
• 😀 When reassembling, apply grease to certain parts to ensure smoother movement and prevent wear.
• 😀 Be mindful of the proper placement of the parts during reassembly, particularly the locking mechanism.
• 😀 After cleaning, check for any signs of damage or wear on the components before reassembly.
• 😀 When installing the roller, ensure the correct orientation based on the weight distribution.
• 😀 Apply a small amount of grease on the parts to ensure longevity and smooth function after reassembly.
• 😀 After finishing the reassembly, make sure everything is tightly secured and test the CVT for smooth operation.
• 😀 Regular maintenance and cleaning of the CVT system will help ensure its longevity and performance.

Q & A

What is the purpose of this video tutorial?

The video tutorial aims to guide viewers on how to perform a CVT (Continuously Variable Transmission) service at home, including cleaning, disassembly, and reassembly of the CVT parts.

Why is it important to clean the CVT parts during the service?

Cleaning the CVT parts ensures that any dirt, debris, or oil buildup is removed, which helps improve the performance and longevity of the CVT system.

What tool is mentioned for loosening parts in the CVT service process?

A T8E key is mentioned as the tool for loosening parts in the CVT service process.

How should the CVT parts be cleaned according to the video?

The CVT parts should be cleaned using dish soap and water. The presenter recommends using dish soap as it is gentler on rubber components, ensuring they last longer. The parts should be air-dried or wiped with a clean cloth.

What special precaution is advised when cleaning the CVT components?

It is important to avoid using a scrub brush that could cause water to mix with grease inside the parts. Instead, a soft cloth or tissue is recommended to prevent contamination.

Why is it necessary to lubricate the CVT parts with grease?

Grease is applied to ensure smooth operation and prevent wear on the parts. The lubrication helps keep the CVT parts functioning efficiently over time.

What should be done if a compressor is not available for drying the CVT parts?

If a compressor is not available, the parts can be air-dried or wiped with a clean cloth to remove any remaining moisture.

How is the installation of the CVT components done after cleaning?

After cleaning, the components are carefully reassembled, with specific attention to the correct positioning of parts like the guide pin and rubber components, ensuring they are properly lubricated.

What is the purpose of using tape to secure certain parts during reassembly?

Tape is used to temporarily secure parts during reassembly to prevent any shifting or misalignment while the parts are being fastened and tightened.

What is the role of the roller in the CVT system, and how should it be installed?

The roller helps in the rotation and transition of the CVT system. When installing the roller, it is important to ensure that the thick side is positioned correctly, as this helps distribute the load and prevent uneven wear on the system.