Uji Kompetensi Keahlian TKJ Paket 4 - Cara Sharing File Menggunakan Kabel UTP (Peer to Peer)

Summary

This tutorial guides viewers through the process of sharing data between two computers using a LAN cable. The steps include setting up the connection, configuring IP addresses, and disabling firewalls on both computers. The video explains how to enable file and printer sharing, configure folder sharing settings, and test the connection between the two machines. By following the detailed instructions, users can successfully share files and folders between two computers, ensuring a seamless data transfer experience.

Takeaways

• 😀 Make sure you have a LAN cable or a USB LAN adapter to connect the two computers for data sharing.
• 😀 To disable computer security, go to 'Control Panel', then 'System and Security', and turn off Windows Defender Firewall.
• 😀 Set the IP address of each computer by navigating to 'Network and Sharing Center', then 'Change adapter settings', and configure the IP address in 'Internet Protocol Version 4'.
• 😀 Ensure both computers have different IP addresses (e.g., 192.168.100.1 for PC1 and 192.168.100.2 for PC2) to enable them to communicate.
• 😀 Disable password-protected sharing in 'Network and Sharing Center' so that one computer can access the other's shared files without a password.
• 😀 Test the connection between the two computers using the 'ping' command to confirm they are connected to each other.
• 😀 Create a folder on the second computer (PC2) that you want to share, then right-click and select 'Properties', followed by 'Sharing' and 'Share'.
• 😀 Share the selected folder with everyone and set permissions for reading and writing, so others can access the files.
• 😀 For PC1, repeat the same process to share a folder and ensure it is accessible by PC2.
• 😀 Test the data sharing by navigating to the shared folder using the IP address of the other computer (e.g., \192.168.100.2).
• 😀 Finally, ensure that both PCs can access and exchange data successfully, confirming the sharing setup is complete.

Q & A

What is the first step to set up file sharing between two computers?

The first step is to prepare the necessary hardware, such as a LAN cable. If a LAN port is not available on the computer, a USB to LAN adapter can be used.

How do you disable Windows Defender Firewall for file sharing?

Go to 'Control Panel' > 'System and Security' > 'Windows Defender Firewall', then select 'Turn Windows Defender Firewall on or off'. Turn it off for both PCs and click 'OK'.

Why is it important to set up IP addresses on both computers?

Setting up unique IP addresses on both computers ensures they can communicate over the network. The addresses should be within the same subnet, such as '192.168.100.1' for PC1 and '192.168.100.2' for PC2.

What should you check in the 'Network and Sharing Center' to enable file sharing?

In 'Network and Sharing Center', make sure 'Network discovery' and 'File and printer sharing' are turned on for both PCs. Additionally, you should disable password-protected sharing for easier access.

How can you verify if the two PCs are connected properly?

You can verify the connection by using the 'ping' command in the Command Prompt. Ping the IP address of the other computer (e.g., ping 192.168.100.1 from PC2) to check if the computers can communicate.

What are the steps to share a folder on PC2?

Right-click on the folder you want to share on PC2, select 'Properties', go to the 'Sharing' tab, and click 'Share'. Then, add 'Everyone' with read/write permissions and ensure 'Share this folder' is checked.

What is the purpose of disabling password-protected sharing?

Disabling password-protected sharing ensures that other computers on the network can access the shared folders without needing a password, simplifying the sharing process.

How do you access a shared folder from another computer?

To access a shared folder, open 'File Explorer', enter the IP address of the other computer (e.g., \192.168.100.2) in the address bar, and you will be able to view the shared folder.

What should you do if the 'Share this folder' option is not selected?

If 'Share this folder' is not selected, the folder will not be shared. You need to ensure this option is checked in the 'Sharing' tab of the folder's properties for the other computer to access it.

What should you do if you want to share a specific file instead of a whole folder?

You can follow the same steps as sharing a folder. Right-click on the file, go to 'Properties', select 'Sharing', and follow the steps to allow others to access it by adding 'Everyone' with read/write permissions.