Melakukan Instalasi Fast Connector

Summary

This video demonstrates the process of installing a fast connector for optical fibers. The presenter walks through the essential tools and materials, guiding viewers through each step: preparing the fiber, stripping the jacket, cleaning, and assembling the connector. The focus is on proper handling and safety measures, with a particular emphasis on testing the connection's integrity. The video concludes by encouraging viewers to try the process themselves while ensuring proper cleanup after completing the task.

Takeaways

• 😀 Ensure all required tools and materials are ready, as they will be familiar if you've previously worked with optical fiber repair.
• 😀 Begin by securing the cable with tape, as there is no designated area for cutting the fiber.
• 😀 Separate the player from the cable and the fiber that will be stripped.
• 😀 Use a jacket remover to strip the jacket of the fiber, removing about 4-5 cm.
• 😀 Choose one color of the fiber (e.g., blue or orange) for easy identification and measurement.
• 😀 Carefully place the fiber into the holder (also called a chip holder) for further processing.
• 😀 After stripping, clean the fiber with alcohol and tissue to ensure it is free from contaminants.
• 😀 Use a clever tool to cut the fiber at the proper length for the connector.
• 😀 Pay attention to safety when working with tools and always use tape to secure cut areas.
• 😀 Insert the fiber into the fast connector, carefully locking it into place without causing damage.
• 😀 Test the connection to ensure the fiber works correctly, confirming it is properly connected and functional.

Q & A

What is the purpose of the video tutorial?

The purpose of the video is to demonstrate the process of installing a fast connector for fiber optic cables.

Why is tape used in the process?

Tape is used to secure the cable and protect the fiber during the installation process, particularly when there is no place for the fiber cutting.

What tools are mentioned for stripping the fiber optic cable?

A jacket remover and a stripper are mentioned as tools for stripping the fiber optic cable.

How long should the jacket be stripped from the cable?

The jacket should be stripped for a length of about 4-5 cm.

What is the significance of the blue and orange colors mentioned?

The blue and orange colors refer to the different colored wires or cables used in the process, with the blue being chosen for the demonstration.

What is the role of the 'holder' or 'cipya holder' mentioned in the tutorial?

The holder is used to secure the fiber optic cable in place while the connector is installed.

How do you ensure the fiber optic cable is clean during installation?

The fiber optic cable is cleaned using alcohol and tissue after stripping the jacket and before continuing with the installation process.

What safety measure is emphasized during the installation?

The video emphasizes the importance of using tape to prevent accidents and injuries while cutting and handling the fiber optic cable.

What is the purpose of the 'MP3' and its role in the process?

The 'MP3' likely refers to a part or tool involved in securing the fiber optic connector in place, ensuring it is locked properly.

What test is performed at the end of the installation process?

A test is conducted to ensure that the fiber optic connector is correctly installed and that the signal passes through properly, confirming the connection is working.