CARA MENCARI UKURAN BALOK BETON || ukuran balok rumah 2 lantai
Summary
TLDRThis video explains how to calculate the dimensions for beams and columns in multi-story residential buildings. It covers key concepts such as determining the beam height and width based on column spacing, and provides formulas for calculating rebar reinforcement. The speaker emphasizes the importance of structural calculations for different floor levels and provides practical tips on reinforcement placement and overlap length. This informative guide is crucial for those involved in structural design, offering essential insights into beam dimensioning and reinforcement for safe and efficient building construction.
Takeaways
- ๐ Beam dimensions depend on the distance between structural columns, and formulas are used to calculate height and width.
- ๐ The formula for beam height is: Beam Height (H) = Column Distance (L) รท 12, with typical results rounded to the nearest 5 cm.
- ๐ The width of the beam is calculated by multiplying the beam height by a factor of 0.5 to 2/3, based on the column distance.
- ๐ Reinforcement strategies for beams vary based on their location in the structure: tumpuan (support) vs. lapangan (field).
- ๐ For tumpuan (support) areas, the top reinforcement consists of 3 rebars, while the bottom has 2 rebars.
- ๐ For lapangan (field) areas, the reinforcement is reversed: the top has 2 rebars, and the bottom has 3 rebars.
- ๐ The spacing for stirrups (sengkang) differs between tumpuan and lapangan areas, typically 10 cm for support areas and 15 cm for field areas.
- ๐ Beam dimension calculations require adjusting for building height and structural needs, factoring in both the height and width of beams.
- ๐ The reinforcement at tumpuan areas uses larger stirrups and fewer rebars at the top, whereas lapangan areas use more rebars at the bottom.
- ๐ Proper structural analysis and calculations are critical, as beam reinforcement and dimensioning cannot rely solely on experience but must be tailored to the load-bearing capacity of each beam.
Q & A
What is the main purpose of using flat columns in residential buildings?
-Flat columns are embedded within the walls, meaning they do not protrude. This helps in saving space and maintaining the aesthetic and structural integrity of the walls.
How is the beam height (H) calculated in this script?
-The beam height is calculated by dividing the column-to-column distance (L) by 12. For example, if the distance is 4 meters, H would be 0.33 meters, rounded to 35 cm.
Why is the column-to-column distance important when calculating beam dimensions?
-The column-to-column distance (L) directly impacts the beam dimensions. Larger distances between columns require larger beam dimensions to ensure structural stability and strength.
What formula is used to calculate the beam width (B)?
-The beam width (B) is calculated by multiplying the beam height (H) by a factor between 1/2 and 2/3. For example, if H is 35 cm, B can range between 17.5 cm and 23.33 cm, with a typical choice of 20 cm.
What is the typical reinforcement layout for beams in this design?
-In the support areas (tumpuan), three top bars and two bottom bars are used. In the middle field areas (lapangan), two top bars and three bottom bars are used.
Why is the reinforcement different in the tumpuan and lapangan areas?
-The reinforcement is designed differently because the load distribution varies. The tumpuan area, where the beam connects to the column, bears more weight on top, while the lapangan area has more weight at the bottom.
What is the overlap requirement for the reinforcement bars?
-The overlap of the reinforcement bars must be 40 times the diameter of the rebar. For example, with 13mm diameter rebar, the overlap length would be 52 cm.
How does the spacing of stirrups (sengkang) vary between the tumpuan and lapangan areas?
-In the tumpuan area, the stirrups are spaced 10 cm apart, while in the lapangan area, they are spaced 15 cm apart, reflecting the different load-bearing conditions.
Why are different beam dimensions and reinforcement used for residential buildings with varying numbers of floors?
-The load on the beams increases with more floors, so the dimensions and reinforcement requirements must be adjusted to ensure the structure can safely support the additional weight.
What role does structural analysis play in determining the exact dimensions and reinforcement of beams?
-Structural analysis is essential for determining the exact dimensions and reinforcement because it accounts for factors like load, building design, and material properties, ensuring the structure is both safe and efficient.
Outlines
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowMindmap
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowKeywords
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowHighlights
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowTranscripts
This section is available to paid users only. Please upgrade to access this part.
Upgrade NowBrowse More Related Video
Difference between Longitudinal and Transverse Reinforcement
Part 3(c): Beam Design to EC2 (Shear Reinforcement Cont'd & Final)
How to Read Reinforced Concrete Drawings for Beginners
Les bons gestes en maรงonnerie - Plancher poutrelle hourdis
Steel Connections Every Structural Engineer Should Know
[MEKANIKA BAHAN] PERTEMUAN-17 : "DEFORMASI METODE DOUBLE INTEGRAL PART-1" OLEH Dr. JANUARTI J. E.
5.0 / 5 (0 votes)