Cara Membuat Sambungan Kabel Colokan Listrik / Extension Stop Kontak

Summary

In this tutorial, the presenter demonstrates how to create a safe and functional extension cord. The process includes selecting the correct materials like a suitable cable, plug, and socket. Key steps are explained, such as carefully stripping the cable, ensuring the copper wire is properly inserted and secured, and making sure no exposed copper is visible to prevent short circuits. The presenter emphasizes safety at every stage, including proper handling of tools and ensuring the cable’s outer layer is correctly placed. The video concludes with a successful test of the finished extension cord.

Takeaways

• 😀 Always use standard electrical cables for safety, not audio cables.
• 😀 Ensure you have the right tools: screwdriver, cutter, pliers, and a measuring tape.
• 😀 When preparing the cable, carefully strip the insulation without damaging the copper inside.
• 😀 Measure and cut the cable to the required length before stripping the insulation.
• 😀 Be cautious while stripping the cable to avoid damaging the inner wires.
• 😀 Make sure the copper wire is securely clamped to avoid loose connections, which could lead to safety hazards.
• 😀 When inserting the copper wire into the connector, ensure it's fully inserted and held tightly with the screws.
• 😀 Avoid leaving exposed copper to prevent potential short circuits or electrical hazards.
• 😀 For better security, ensure the white insulating layer is inside the clamp to prevent the wire from moving.
• 😀 It’s okay to connect the cable with either side (left or right) of the connector, but ensure the grounding pin is used if necessary.

Q & A

What materials are needed to create the extension cord as described in the video?

To create the extension cord, you'll need a power socket, a plug, cable (which should meet electrical standards), a screwdriver, a cutter, and pliers.

Why is it important to use the correct type of cable for this project?

It is crucial to use a cable that meets electrical installation standards. Using an audio cable, for example, may compromise safety due to its different construction and material properties.

What is the correct procedure for preparing the cable before attaching the plug?

Before attaching the plug, you need to strip the outer layer of the cable carefully to expose the copper wires inside. The copper wires are then connected to the terminals inside the plug.

What is the most difficult part of the process, according to the video?

The most difficult part of the process is stripping the cable carefully. If not done properly, the copper inside might also get stripped, requiring rework.

How can you ensure the copper wires are securely attached inside the plug?

You should make sure the copper wires are inserted into the correct terminals and tightened with screws. Ensure that no copper wire is visible outside the plug to avoid short circuits.

Is there a specific orientation for the cable when attaching it to the plug?

There is no strict rule for cable orientation when attaching it to the plug. The cable can be connected either way (blue on the right or left) as long as the connections are secure.

What should you do if the copper wires extend too far out of the cable?

If the copper wires extend too far, you should trim them to the proper length. This ensures they don't cause short circuits or improper connections.

How do you prevent the cable from moving or becoming loose after installation?

By securing the cable firmly inside the plug and ensuring the copper wires are tightly clamped by the screws, the cable will stay in place without movement, which enhances safety and durability.

What should you focus on when attaching the cable to the socket to ensure proper installation?

When attaching the cable to the socket, ensure that the copper wires are securely inserted and that no copper is exposed outside. The outer insulating layer of the cable should be clamped securely to prevent movement.

What is the purpose of the additional hole in the socket mentioned in the video?

The additional hole in the socket is typically used for grounding (HRD), though it's rarely utilized and depends on the type of cable being used.