TUTTE LE CONTAMINAZIONI DA RISOLVERE NEL LAVAGGIO AUTO - 3A Parte

Summary

In this detailed tutorial, the presenter takes us through an unconventional car washing technique using the same alkaline product previously applied in a pre-wash. The process emphasizes the importance of thoroughly cleaning the foam cannon to prevent blockages and the subsequent need for maintenance. The tutorial highlights the effectiveness of mechanical action over alkaline and acidic pre-washes, the role of neutral shampoo as a lubricant, and the challenges of removing traffic film and bee droppings with specific products. The use of dish soap as an experimental last resort shows significant improvement in removing stubborn smog stains. The video also covers the removal of asphalt residues and iron contamination, underscoring the need for detailed cleaning and proper product use to achieve a pristine white car finish, while debunking common car washing myths and showcasing the presenter's expertise and humor.

Takeaways

• 😀 Using an alkaline pre-wash and mechanical action to remove tough road film and stains
• 😀 Iron contaminants require an iron remover treatment
• 😀 Bird droppings need an acidic product to remove properly
• 😀 White cars show defects much more than dark colored cars
• 😀 Proper washing techniques save time and money on products
• 😀 Skipping clay bar when possible saves time for seasoned detailers
• 😀 Oxidation and rust are difficult defects to remove
• 😀 Multiple wash stages over several hours may be needed for neglected cars
• 😀 Trained detailer's judgement on process can differ from standard guidelines
• 😀 Skipping steps risks poor results; following them takes more time

Q & A

What type of pre-wash product is being used?

A very strong alkaline pre-wash product.

Why is the foam gun being emptied completely?

To prevent the filters from getting clogged when products remain in the foam gun.

What is being used along with the alkaline pre-wash?

A neutral shampoo as a lubricant to work the pre-wash with mechanical action.

What is recommended to remove bird droppings?

Acid products, as they help soften and dissolve the droppings.

How is the iron remover working after the pre-wash?

Very selectively, only on the areas contaminated with iron particles, showing the pre-wash was effective.

Why was clay barring skipped after washing?

The pre-wash was strong enough to remove most contaminants, making clay barring unnecessary.

What is causing the oxidation on the hood?

Long-term neglect and lack of proper maintenance over the years.

How long did it take to wash the Range Rover?

About 5 hours due to the condition of the vehicle and it being white.

Could this process be faster on a darker colored car?

Yes, it could be done in about an hour since issues blend in more on darker paint.

What is recommended after washing?

Polishing and protection to restore gloss and protect the finish.