Regulations 2013 : Classification, Labelling and Safety Data Sheet of Hazardous Chemicals | Group 10
Summary
TLDRThe video script discusses the Class Regulation 2013, enacted to regulate hazardous chemical supply in workplaces, emphasizing the classification, labeling, and safety data sheet requirements. It outlines the responsibilities of suppliers, including proper chemical classification, packaging, labeling, and SDS preparation. The script also covers exemptions, hazard types, and penalties for non-compliance, aiming to ensure a safe and healthy work environment.
Takeaways
- 📅 The Class Regulation 2013 was enacted on 11th October 2013 and took effect the following day, aiming to regulate the supply of hazardous chemicals in the workplace.
- 🛠️ It replaced the previous CTHCR (Chemical, Toxic and Hazardous Chemical Regulation) 1997, focusing on chemical classification and hazard communication.
- 🚫 The regulation does not apply to radioactive materials, pesticides, and certain poisons as defined by specific acts and regulations.
- 📦 Suppliers are responsible for classifying chemicals, ensuring proper packaging, labeling, preparing Safety Data Sheets (SDS), and maintaining an inventory of hazardous chemicals.
- 🔍 There are two types of suppliers: principal suppliers who formulate or manufacture the chemicals, and subsidiary suppliers who repackage or distribute them.
- 📊 Hazardous chemicals are classified into categories based on physical, health, and environmental hazards, with Category 1 being the most severe.
- 📝 The principal supplier must record the classification of chemicals and make these records available for inspection.
- 🔒 Packaging must be designed to prevent leakage and be securely sealed, with penalties for non-compliance including fines and imprisonment.
- 🏷️ Labels must include product identifiers, hazard statements, pictograms, and precautionary statements, and must be updated within three months of any classification changes.
- 📄 Safety Data Sheets (SDS) are crucial for chemical recipients, containing 16 sections of information on hazards, safety measures, and more.
- 🗂️ An inventory of hazardous chemicals imported or supplied in quantities of 1 metric ton or more annually must be prepared and submitted by manufacturers and importers.
Q & A
What is the purpose of the Class Regulation 2013?
-The purpose of the Class Regulation 2013 is to regulate the supply of hazardous chemicals for use at the workplace, ensuring proper classification, labeling, and communication of hazards to ensure the safety and health of workers.
When was the Class Regulation 2013 enacted and when did it take effect?
-The Class Regulation 2013 was enacted on 11th October 2013 and took effect on the 12th of October 2013.
What does the Class Regulation 2013 replace?
-The Class Regulation 2013 replaced the Chemicals (Classification, Packaging and Labeling of Hazardous Chemicals) Regulation 1997, known as SCPM Regulation.
What are the main responsibilities of chemical suppliers under the Class Regulation 2013?
-The main responsibilities of chemical suppliers include classifying chemicals as hazardous, ensuring proper packaging, labeling each package with correct information, preparing Safety Data Sheets (SDS) for each hazardous chemical supplied, and maintaining an inventory of chemical supplies.
What are the two types of suppliers mentioned in the script?
-The two types of suppliers mentioned are the principal supplier, who formulates, manufactures, imports, recycles, or reformulates a hazardous chemical, and the subsidiary supplier, who repacks, distributes, or retails hazardous chemicals.
What is the significance of the Industry Code of Practice (ICoP) in the context of the Class Regulation 2013?
-The Industry Code of Practice (ICoP) provides guidelines on the classification of chemicals according to their physical, health, and environmental hazards, and includes criteria and decision logics for each hazard class, which is crucial for compliance with the Class Regulation 2013.
What are the three types of hazards that the Class Regulation 2013 addresses?
-The three types of hazards addressed are physical hazards based on the intrinsic properties of the chemical, health hazards which include factors that can negatively impact health, and environmental hazards related to events or substances harmful to the ecological system.
What is the penalty for suppliers who fail to comply with the packaging requirements of hazardous chemicals as stipulated in the Class Regulation 2013?
-Suppliers who fail to comply with the packaging requirements can face a fine not exceeding 10,000 ringgit, imprisonment for a term not exceeding one year, or both. For continuing offenses, a fine of 1,000 ringgit may apply for each day or part of the day the offense continues after conviction.
What information should be included on the label of a hazardous chemical package according to the Class Regulation 2013?
-The label should include a product identifier, supplier identification, signal word, hazard statement, pictogram, and precautionary statement. If the container is less than 125 ml, the label may include a reduced set of information with a reference to read the SDS before use.
What is the role of the Safety Data Sheet (SDS) in the context of the Class Regulation 2013?
-The SDS provides essential information about the hazardous chemical, including its properties, hazards, safety measures, and instructions on what to do in case of accidents. Suppliers must update the SDS with each supply and ensure it contains all required information as per the regulation and ICoP.
What is the procedure for handling confidential business information (CBI) under the Class Regulation 2013?
-CBI, which is limited to the name and composition of hazardous chemicals, can be protected and not disclosed on the SDS and label if it involves trade secrets. Instead, a generic name can be used. However, CBI can be disclosed to the Director General, occupational health authorities, and those handling the chemicals for specific needs.
What are the requirements for the inventory of hazardous chemicals as per the Class Regulation 2013?
-Importers and manufacturers must prepare an inventory of hazardous chemicals imported or supplied in quantities of 1 metric ton or more per year. This inventory must be submitted annually to the Director General by March 31st.
Outlines
📜 Introduction to Hazardous Chemicals Regulation
The video script begins with an introduction to the Occupational Safety and Health (OSH) Classification, Leveling and Safety Data Sheet of hazardous chemicals, known as the Class Regulation 2013. Enacted under the Ocean 1994, this regulation took effect on October 12, 2013, to regulate the supply of hazardous chemicals in workplaces. It replaced the Chemicals (Classification, Packaging, and Labeling of Hazardous Chemicals) Regulation 1997 (SCMP). The Class Regulation focuses on chemical classification and hazard communication to ensure workplace safety. The presenter outlines the main objective of the regulation, which is to provide suppliers with the responsibility of providing sufficient information on the hazards of chemicals to mitigate accidents in the workplace.
📋 Responsibilities and Classification of Hazardous Chemicals
This paragraph delves into the responsibilities of suppliers under the Class Regulation, detailing the five main duties: classifying chemicals as hazardous, ensuring proper packaging, labeling with correct information, preparing Safety Data Sheets (SDS), and maintaining an inventory of hazardous chemicals. The script explains the difference between principal and subsidiary suppliers and their roles. It also introduces the Industry Code of Practice (ICoP) for classifying chemicals based on their physical, health, and environmental hazards, and the criteria for hazard classes and categories.
🛑 Labeling and Packaging Requirements for Hazardous Chemicals
The script continues with the specific requirements for labeling and packaging hazardous chemicals. It discusses the responsibilities of suppliers to ensure packaging is secure and labels contain necessary information such as product identifiers, hazard statements, and pictograms. The paragraph also covers the penalties for non-compliance with these regulations, including fines and imprisonment. The regulation specifies the conditions for affixing labels and the need for labels to be updated within three months of any changes in classification.
📄 Safety Data Sheets and Inventory Management
The final paragraph focuses on the importance of Safety Data Sheets (SDS) and the inventory of hazardous chemicals. Suppliers are required to update SDS with each supply and any mixture containing hazardous substances. The script outlines the 16 sections of an SDS and their significance, as well as the need for revision when new information becomes available or as directed by an officer. Additionally, it covers the regulation on confidential business information (CBI) and its protection, with provisions for disclosure to certain individuals when necessary. The paragraph concludes with the penalties for non-compliance with the inventory regulation, including fines and imprisonment.
Mindmap
Keywords
💡OSH Classification
💡Safety Data Sheet (SDS)
💡Hazardous Chemicals
💡Regulation 2013
💡Principal Supplier
💡Subsidiary Supplier
💡Hazard Classification
💡Pictogram
💡Exemption
💡Confidential Business Information (CBI)
💡Inventory of Hazardous Chemicals
Highlights
OSH Classification Leveling and Safety Data Sheet of hazardous chemicals, known as the Class Regulation 2013, was enacted on 11th October 2013.
Class Regulation 2013 replaced the previous Chemicals (Classification, Packaging, and Labeling of Hazardous Chemicals) Regulation 1997.
The main objective of the Class Regulation is to ensure suppliers provide sufficient information on chemical hazards to mitigate workplace accidents.
Class Regulation applies to chemical supply for use at workplaces, including chemical elements and compounds obtained by any manufacturing process.
Exemptions include radioactive materials, pesticides, and certain poisons as defined by specific acts and regulations.
Suppliers have five main responsibilities including classifying chemicals, ensuring proper packaging, labeling, preparing Safety Data Sheets (SDS), and maintaining an inventory of chemicals.
Principal suppliers are those who formulate, manufacture, import, recycle, or reformulate hazardous chemicals.
Subsidiary suppliers are those who repack, distribute, or retail hazardous chemicals.
Regulation 4 outlines the duty of the principal supplier to classify chemicals as hazardous.
The Industry Code of Practice (ICOP) provides guidelines for classifying chemicals based on physical, health, and environmental hazards.
Hazard categories are assigned numbers and letters to indicate the severity of the hazard, with Category 1 being the most severe.
Regulation 6 details the packaging requirements for hazardous chemicals to ensure the content cannot escape and is safely contained.
Suppliers must ensure packaging is sealed in a way that indicates if it has been tampered with.
Regulation 7 emphasizes the importance of proper sealing to prevent unauthorized access to hazardous chemicals.
Regulation 8 requires labeling of hazardous chemical packaging with necessary information including product identifier and hazard statements.
Sub-regulation 8.12 specifies the information that must be included on labels in accordance with hazard classification.
Regulation 10 and 11 provide guidelines on the use of hazard pictograms and the dimensions of labels for hazardous chemicals.
Regulation 12 discusses the proper application of labels on packaging, including conditions for tagging and special considerations for small containers.
Safety Data Sheets (SDS) must be updated and provided for each hazardous chemical supply, containing 16 specified sections of information.
Regulation 14 mandates the preparation and submission of an inventory of hazardous chemicals imported or supplied in quantities of 1 metric ton or more per year.
Confidential Business Information (CBI) can be protected under certain conditions, allowing the omission of specific chemical identities on SDS and labels.
Penalties for non-compliance include fines up to 10,000 ringgit, imprisonment, or both, with additional daily fines for continued offenses.
Transcripts
[Music]
so here is our group members and i am
not fatigued as the first presenter
for the background the osh
classification leveling and safety data
sheet of the hazardous chemical
known as the class regulation 2013 has
been gathered on 11 october 2013 and
take effect on the 12th october 2013. it
was enacted under provisions of a
paragraph 1662 a c k n u of the ocean
1994 and asked to regulate the supply of
the hazardous chemical for use at
workplace class figuration 2013 versus
cpi regulation 1997.
the ausch classification packaging and
labeling of the hazardous chemicals
regulation 1997 known as scpm regulation
were replaced by the class regulation
the cpa regulation were visited for the
purpose of the chemical classification
and hazard communication
and previously used as a mechanism to
control the supply of the hazardous
chemicals to the workplace however cpi
regulation are not addressed information
about chemical suppliers
not defined disco principle and
subsidiary suppliers and also do not
address specific hazards
even though both the superior relation
and classification were drafted with the
same intention which is to provide a
legal provision to ensure that the
chemicals supply or use in any place of
work will be classified accordingly and
with proper hazard communication to
ensure the safety and health of the
workers however there are some
significant differences that should be
highlighted to ensure better
understanding and compliance
so the main objective of the class
simulation is to ensure suppliers of the
hazardous chemicals provide sufficient
information on the hazards of the
chemicals that they are supply
so as to mitigate the risk of the
accidents happening in the workplace
thus providing a safe and healthy
working environment and condition
next we go to the application
so first class regulations should apply
to the chemical supply for use at a
place of work
in this regulation chemical means that a
substance which is a chemical element
and it's compounds in a natural state or
obtained by any manufacturing process
and chemical measures is a machine or a
solution composed of two or more
substances which do not react
second is exemption which is the glass
situation does not apply to first
defined as a radioactive material under
the atomic energy licensing act 1984
second defined as the pesticide under
the pesticide egg and the state listed
as a poison in the poison disorder 1993
except for chemicals which are
classified therein as a industrial and
laboratory poisons and so on next the
radiation also does not apply to the
transportation of the hazardous
chemicals by rail road inland waterway c
or a and hazardous chemicals in transit
which are stored at a bonded warehouse
so as you guys see in this slide the
hazardous chemical consists two parts of
the schedule one which is but a in part
b
assalamualaikum my name is mohammad i
did bet no arifin so i will proceed with
the next slide which is the
responsibilities of suppliers
here we have five main responsibilities
of suppliers which include to classify
chemicals as hazardous chemicals to
ensure that a hazardous chemical is
supplied in a packaging which satisfies
a requirement by osha
next is to label every packaging of a
hazardous chemical with the right
information
to prepare a safety data sheet or sds
for each hazardous chemical supply and
lastly to prepare an inventory chemicals
consisting of information on each
hazardous chemical supply
so in this slide we have a diagram
showing each of the main
responsibilities that should be carried
by suppliers including the manufacturer
and importer
so who are the suppliers
supplier is the person who supplies a
hazardous chemicals so there are two
types of suppliers first is the
principal supplier who formulates
manufactures imports recycles or
reformulates a hazardous chemical
second is a subsidiary supplier this is
the supplier who repack distribute or
retail hazardous chemicals
on to the next slide we will proceed
with the regulation which is regulation
4 duty of principal supplier to classify
chemicals as hazardous chemicals in this
regulation it will be focusing on two
parts of industry code of practice or
also known as icop class
so the first part which is part 1 icop
class consists of classified chemicals
which will be updated from time to time
in addition if there are any
inconsistencies in the classification
the director general may determine the
classification and labeling elements for
that particular chemical
as for part 2 icop class this part
describes the method of classifying
chemicals according to their physical
health and environmental hazards
this part contains the criteria for
classifying chemicals and decision
logics for each hazard classes
so next is the classification of
hazardous chemicals but first we need to
know different types of hazard available
basically we have three types of hazard
first is the physical hazard which is
based on the intrinsic properties of the
chemical
second is a health hazard which include
chemical physical or biological factors
in our environment that can bring
negative impacts to our health
and lastly is an environmental hazard
this hazard consists of extreme events
or substances in earth and its
ecological system that might be harmful
to human
so before we see the list of
classification of the hazardous
chemicals first we need to know what is
a hazard category so basically each has
a class contains at least one category
where each category is assigned with a
number for example 1 2 and so on
categories may also be called as types
which are assigned with alphabet such as
a b and so on
so each of this category tells about how
has it is or the severity of a product
where category 1 is always the greatest
level of hazard
if the category is then further divided
category 1a is a greater hazard than
category 1b
while category 2 within the same hazard
class is more hazardous than category 3
and so on
so on this slide is the table of the
hazard category for each hazard class
for all three types of hazards
so next we will be moving on to the
fifth regulation which is the records of
classification
in this regulation we will be focusing
on the duty of principle supplier the
main duties of principal supplier
include to record the classification of
chemicals as hazardous chemicals made
under regulation form
next is to meet the record of the
classification of chemicals as hazardous
chemicals available for inspection by an
officer
and lastly to follow the format of
record as in the part 2 of the icop
class
my name is noor alek lemtiram and i will
continue presenting the next regulation
which is regulation 6 packaging
requirement of hazardous chemicals
specifically it is a duty of supplier to
ensure packaging of hazardous chemicals
by design and constructed that this
content cannot escape
pickaxing and fastening are strong and
able to retain its content
packaging and fastening in materials are
not susceptible to everest acted by the
content or from harmful or dangerous
compound with ease content
if it replaceable fastening device the
packaging can be repeatedly fastened
without
the content escaping
however a supplier who contributes this
regulation be able to affine final
exiting 10 000 ringgit or to
imprisonment for a term not exiting one
year or to both
while in the case of continuing of
offense to a final accident 1000 regain
next is regulation 7 seal of package a
supplier should ensure that every
packaging of hazardous chemical is
initially closed with a seal such in
such a way that once the packaging is
open the seal is broken and cannot be
repaired a supplier who contravenes this
regulation be labeled to a final exiting
10 000 indeed or to imprison mine for a
term not exiting one year or to both
while in the case of continuing orphans
to affirm non-acidic 1000 ringgate
regulation egg is a duty to level
packaging of hazardous chemicals
according to sub-regulation 8.12 which
is leveling it is a responsibility of
principal and subsidiary supplier
their duty to ensure every packaging of
hazardous chemicals is labeled literally
and heavily with product identifier
supplier identification signal word
hazard statement and pictogram and
precautionary statement
if the container is less than 125 ml
supplier may label with product
identifier supplier identification
signal word hazard pitogram and read sds
before use
subregulation
8324527 consists information in
accordance with hazard classification
has
said network and has a statement as
specified in for schedule
set regulation 81 and 82 should be in
accordance with part 3 of the icop
information is supplied in national
language and english language
if the signal word danger is used the
signal warning must not be used
if classified within several hazard
classes all hazard statements should
appear on the label unless there is
evidence of duplication or redundancy
where applicable combine hazard
statement specified in
third schedule should be used
labels should be updated within 3 months
if there is any changes resulting in a
more severe classification
a supplier who contributes sub
regulation one two three four five six
or seven commits an offense and shell on
conviction be labeled to find not
exiting 10 000 ringgit or to
imprisonment for eternal exiting one
year or two both
while in the case of continuing offense
the final exiting 1000 being it for
every day or part of the day during
which the offense continues after
conviction
regulation 10 rules of precedence for
hazard pictograms and hazard statements
on level describe the pictograms that
should be used according to the type of
hazard as shown in the figure
regulation 11 is the dimension of label
on every packaging of a hazardous
chemical under regulation ache shall be
as specified in the fourth schedule as
shown in figure
salar molecule my name is mohammad shahi
regulation 12 officing and taking off
label the manufacturer must follow this
regulation before distribution
first the condition of the label on
packaging the manufacturer
must affix the label horizontally when
packing in the normal position this is
because it will facilitate the user and
can pay enough good attention if the
packaging has harmful chemical
when the condition of the container is
spread such as a rough or hard surface
use tagging and paste on the container
the reason is that the tagging is easy
to use to paste and remove it
and the tag also has no space problem
when the container less than
or equal to
125ml
regulation 12 is reasonable to apply
regulation 13
safety data sheet
sub-regulation 13
number one
safety data sheet to chemical recipient
this regulation is responsible to a duty
of supplier
they need to update sds with each
hazardous chemical supply and any
mixture
containing hazardous substance at the
concentration exceed cut-off value
specify in fifth schedule
what is fifth schedule
sds has 16
section
and each section
has a different information
fifth
section
of this schedule
is fire fighting measure list
recommendation for fighting or fire
caused by the chemical
include suitable extinguishing
technique equipment and chemical hazard
from fire sub regulation 13 number 2
safety data sheet contain
16 must have list in sds has been listed
from number one until 16.
all of which are listed are very
important because they contain chemical
information
safety measures and other information
that user needs to know
subregulation 13 number 3 until 5.
sds language and the need to revise
the information in sds must be same in
accordance with a minimum requirement of
sds as well as
mentioned in the part 3 of icop
icop is industry code of practice
part 3 of icop is hazard communication
labeling and safety data sheet sds
which is gift guideline on the
preparation of the label and sds in
order to achieve compliance with part 5
and part 4 of the regulations
when sds need to revise
usually when something happen like a new
information on hazardous chemical
or a fire has passed since the last date
of preparation of revision
or directed by officer
regulation 14 inventory of hazardous
chemical
duty to prepare and submit inventory
importer and manufacturer has
responsible toward this regulation 14.
they need to prepare an inventory of
hazardous chemicals imported
or supplied for quantity 1 metric ton
and above per year and each clean a year
all the preparation must be submitted
and even 30
to dg
not late then 31 march of foreign year
regulation 15
confidential business information on
hazardous chemical
sub-regulation 15 number one until
number two
cbi is confidential business information
cbi only limited to the name of
hazardous chemical and composition and
ingredient of hazardous chemical
cbi protect the information with the
process that allows certain information
such as
chemical identity
of one or more the trade secret
hazardous ingredient to not be disclosed
on safety data sheet sds
and the label for hazardous product
the information can be omitted and
replaced
with generate name
subregulation 15 number 3 until 5
disclosure of cbi the information can be
disclosed
to 3 type of people which are dg
director general or hd occupational
health daughter
and the people who use or handle
hazardous chemical they can use to fully
their need such as
finish the task lastly for the penalty
final exiting 10 000 ringgit or
imprisonment i'm not exiting one year of
both
and for continued offense find not
exiting one thousand ringgit per day of
a part of the day during continuing
offense after completion
that's all from us thank you
Посмотреть больше похожих видео
Workplace Hazardous Materials Information System (WHMIS) 2015 | Your ACSA Safety Training
Construction Safety: Chemical Safety and Hazard Communication
Dangerous Goods Management
GHS Safety Training Video - Globally Harmonised System Chemicals Safetycare
Food Packaging And Labelling: FSSAI:Food Safety Officer/Technical Officer
Chemical Hazards / Lab Safety Video Part 4
5.0 / 5 (0 votes)