How To EQ SUB BASS
Summary
TLDRこのビデオでは、サブバスのEQ(イコライザ)の調整方法が紹介されています。FabFilter Pro Q3を使用して、ステレオミックスで細かく調整することが重要です。まず、低域のノイズをカットするために、18Hzでローカットを適用し、その後、動的EQを使用して50Hzのクロスオーバーポイントで-2dBのカットを行います。これにより、キックとサブバスがより引き締まり、クリアに聞こえます。さらに、低音を少しブーストして、サブバスの動きを調整し、全体の低域を豊かにします。最後に、ステレオとモノラルのEQを組み合わせて、サブバスをさらに詳細に調整します。この3つのEQの調整により、サブバスを引き締め、音楽の質を向上させることができます。
Takeaways
- 🎚️ スクリプトは、Fabfilter Pro Q3を使用してサブバスのEQを調整する方法を紹介しています。
- 🔍 ステレオミックスでは、大きな変更を加える必要はなく、1dBまたは2dBの小さなステップで調整することが推奨されています。
- 👂 サブバスを聴く際は、ヘッドホンを使用してより良い再生環境を得ることが重要です。
- 📉 スクリプトでは、サブバスを引き締めるためにローカットフィルターを適用し、ノイズを除去しています。
- 🎶 キックドラムとサブバスをよりはっきりとさせるために、動的EQを使用して低域のブーストとカットを調整しています。
- 📉 特定の周波数帯を動的にブーストすることで、サブバスの動きを調整し、リズム感を高めています。
- 🔊 別のEQをサイドチャンネルに適用して、サブバスの詳細を引き出す方法も紹介されています。
- 👌 スクリプトでは、ステレオまたはモノでの適用に応じて、適切なEQ手法を選択することが重要です。
- 🎵 3つのEQの動きを組み合わせることで、サブバスを引き締め、音の質を向上させることが示されています。
- 👨🏫 スクリプトを最後まで聞くことで、サブバスのEQ調整の重要なポイントを学ぶことができると強調されています。
Q & A
ストリートで説明しているEQの種類は何ですか?
-ストリートではFabFilter Pro Q3というEQを使用していますが、他のEQも使用可能です。
ステレオミックスで作業する際に、どのくらいの変化が適切ですか?
-ステレオミックスで作業する際には、5dBや10dBの大きな変化は必要ありません。1dB、2dBの変化で作業することが推奨されています。
サブベースを引き締めるために最初に行うべきことは何ですか?
-サブベースを引き締めるためには、まずローカットをかけることです。これにより、ノイズを除去し、リミッターのパフォーマンスを向上させることができます。
サブベースを引き締める際に、どのようなEQの設定を使用しますか?
-サブベースを引き締めるためには、ローシェルフを使用し、周波数を50Hzに設定して、2dB程度カットします。また、動的EQを使用して、サブベースを引き締めます。
サブベースの低域を強化するためにどのような手法を使うことができますか?
-サブベースの低域を強化するためには、ローカットをかけた後に、周波数を上げてブーストをかけることです。これは、サブベースを引き締め、パンチ感を与える効果があります。
サブベースを引き締める際に、どのようなEQのトレンドを適用しますか?
-サブベースを引き締める際には、低域をカットし、ミッドレンジをブーストすることで、サブベースを引き締めます。また、動的EQを使用して、サブベースをより引き締めることができます。
サブベースを引き締める際に、ステレオとモノラルで異なる処理を行う理由は何ですか?
-サブベースを引き締める際には、ステレオとモノラルで異なる処理を行うことで、サウンドのバランスを調整し、より自然なサウンドにすることができます。
サブベースを引き締める際に、どのようなポイントを意識すべきですか?
-サブベースを引き締める際には、リズムとタイミングに合わせて調整し、サウンドが自然でバランスよく聞こえるようにすることが重要です。また、耳を信頼して、サウンドを聴きながら調整することがポイントです。
サブベースを引き締めるプロセスは複雑に聞こえますが、実際にはどれくらいのステップで行えますか?
-サブベースを引き締めるプロセスは、基本的に3つのEQのステップで行えます。これは、低域のカット、動的EQのブースト、およびミッドレンジの調整です。
サブベースを引き締める際に、どのようなエフェクトを追加することでサウンドの質を向上させることができますか?
-サブベースを引き締める際に、追加でリミッターを使用することで、ノイズを抑え、サウンドの質を向上させることができます。また、サブベースを動的に調整することで、より自然なサウンドにすることができます。
ストリートが3万の購読者を迎える際に、何を特別に提供する予定ですか?
-ストリートが3万の購読者を迎える際には、特別な賞品を抽選で提供する予定です。詳細については、購読者が増え次第発表される予定です。
ストリートのビデオをさらに理解するために、どのようなアクションをとるべきですか?
-ストリートのビデオをさらに理解するためには、ビデオを繰り返し視聴し、提供された情報と技術を実践することが重要です。また、コメント欄やフォーラムで他の視聴者と交流することも有効な方法です。
Outlines
🎛️ サブバスのEQ調整基礎
ビデオでは、FabFilter Pro Q3を使用してサブバスのEQを調整する方法が紹介されています。ステレオミックスで作業する際には、大きな変化を加える必要はなく、1dBまたは2dBの小さなステップで調整することが推奨されています。まず、非常に低い周波数(13Hz)でローカットフィルターを適用してノイズをカットし、リミッターがノイズなしで動作するようにします。次に、動的EQとしてローシェルフを使用して、キックドラムなどの低周波数を引き締め、パンチを増します。また、周波数帯を動的に調整することで、サブバスをよりタイトにまとめることができます。
🎶 サブバスの動的EQとブーストの調整
サブバスをより明確にするために、動的EQを用いて低周波数帯を微調整します。ビデオでは、50Hzでクロスオーバーポイントを設定し、-2dBでローシェルフを減衰させています。これにより、キックが入る前にEQが働き、よりタイトでパンチのあるサウンドを実現します。さらに、ローエンドをブーストすることで、サブバスの動きを調整し、全体のローエンドをより引き締めます。この調整は、サブバスが音楽全体と調和し、聴く者の注意を引くために非常に重要です。
🎁 30,000購読者達成の特別企画
ビデオの最後に、30,000人の購読者を迎える際に特別なプレゼントを提供すると告知されています。まだ購読していない視聴者に対して、購読ボタンを押すことで告知を受けるよう促されています。また、ビデオを気に入った場合は「いいね!」を押すことで、チャンネルのアルゴリズムに好影響を与えるとアドバイスされています。
Mindmap
Keywords
💡EQ
💡サブベース
💡FabFilter Pro Q3
💡ダイナミックEQ
💡ローカット
💡ローシェルフ
💡クエリ
💡ステレオとモノラル
💡ブースト
💡リミッター
💡サブスクリプション
Highlights
Introduction to the video on how to EQ sub bass using FabFilter Pro Q3.
Explanation of the importance of working with 1-2 dB max steps for a stereo mix.
Listening to the bass track to identify areas that need tightening.
Technique of using headphones for better low-end listening experience.
Identifying the wobbly low end and the need for clarity and tightness.
Applying a low cut filter at 13 Hz to eliminate rumble and noise.
The benefit of low cut for limiter performance without noise.
Using a dynamic EQ to grab the low end and make it tight and punchy.
Adjusting the crossover point to 50 Hz for dynamic EQ effect.
Visual representation of the dynamic EQ working with the sub bass.
Adding a subtle low-end boost to enhance the bass movement.
Adjusting the tilt to lift frequencies up to 200 Hz for bass enhancement.
Previewing the effect of the EQ adjustments on the bass.
Using a second EQ for additional detail and punch in the sub bass.
The importance of listening and deciding between stereo or mono EQ for mid frequencies.
Final summary of the three EQ moves used to tighten up the low end.
Upcoming subscriber giveaway at 30,000 subscribers.
Transcripts
hi i'm streaky in today's video i'm
going to show you how to eq
sub bass let's get into it so here we
are
inside of fabfilter pro q3 this is what
i'm going to use to show you but you can
use
any eq that you have now i've got this
set up so that it's at
3 db you see it's quite zoomed in that's
because
when you're working with a stereo mix
you don't have to do
massive high changes as in like 5 db
steps or 10 db steps i'm working in say
1 db
2 db max steps so that's why i have it
on that resolution so
let me just show you the first thing to
do to tighten up the base so i've got
a track from my assistant again so let's
have a listen
to the bass and i'll try not to talk as
much so you can hear exactly what's
going on
if you just listen to the the subs
that's what we're eq
listen to those uh the low end and uh
maybe on headphones is a better thing to
listen on if you're
in a room that doesn't play it back as
well
[Music]
it's a little bit wobbly in the low end
what we want to do is tighten that
up so that we get the kicks and
everything
sounding a lot clearer and a lot tighter
so the first thing
that i do is
it's put a low cut on so if i click that
we have a low cut and i have that on
about 18.
so i always boost up a touch as well so
i'm cutting very low here i'm cutting at
13 hertz
that's just to get rid of any kind of
really noisy rumble that's going on at
the bottom
and what this also does later on is if
you're putting
any kind of limiting across it it just
helps the limiter out without having any
kind of noise
so we have that there okay so that's
tied up a little bit let's go in and out
okay the next thing to do is
i want to grab that low end so if i put
this
eq into make this into a dynamic eq
and i want to let's just turn this one
off for a second
so i want this in a
um again this is a shelf
so a low shelf and i'm bringing this
down by about
2 db so you can see as it kicks in
it's not taking eq away until the kick
comes in but what this does
it just gets it really tight and punchy
so let me just bring the track back and
i'll play
what i'm doing so i want to bring this
crossover point up to about 50 hertz
and um like i say i'm bringing this down
you can see around here
it's at -2 db so i'm only taking
although it says here that i'm minus one
by the times the curve goes down it's
kind of a minus two so you just
see that visually though but if you're
using a different eq then you can
try that so let's just put this
low cut back on and you can see what's
happening
it looks kind of cool but all it's doing
is cutting and then it's like
this section round here between
say 10 hertz and 50 hertz is just
moving dynamically with the stuff that's
going on in the sub bass
[Music]
so a little other trick you can do is
add a little bit of low so you can move
this cube
on here
to do a similar effect that i'm doing on
that one
but it just changes
the way that works so this just gives a
little bass boost before it
so that's lifting it around it's not a
lot it's like half a d
third of a db even but it just by by
moving that
the tilt on that it actually is lifting
all the frequencies up to around the
200 so you're getting a little lift in
the base that's also moving
so it's making the whole bottom end move
at in the right timing
and then you'll hear the result let's
just stop that
and preview again
[Music]
and if it's too much you can always lift
up depends on how much
really low subs you've got going on
still adding a bit look and it's also
adding a bit here but it's just making
the bass move around it sounds really
nice
[Music]
what you could do also is you could
[Music]
bring in another eq here
there's another thing put this in
the sides only
another shell
[Music]
eq then normally eq is keeping it punchy
and then we've got this doing a little
cut so
i could also then make this so it's just
[Music]
so just getting a lot of detail in those
subs by doing those
three eq moves
so let me just round up what i did here
so
the first one i've just got a
low pass going in the stereo so that's
just doing everything in low pass
the next one is a low shelf
that's in the sides only so that's mono
in the base
around those frequencies in the sub then
i've got the mid so it's just doing the
center channel but you can have that on
the stereo as well it depends on
all of this depends on listening and
working out whether that's something
that
needs to be done on the stereo or the
mid but you just got to use your ears on
that
and so what i'm doing here is i've got
this in a
as a dynamic eq and this is
pulled down a little bit so it's just
pumping the low end down a touch
in the in the subs and i've just moved
that curve
of the q so that it's just lifting it a
little bit as well
above that frequency range so that we're
getting a little bass bump
and also there's a little bass bump
going on here too so we're kind of
lifting
and we're getting the bass moving at the
same time so it
looks complicated kind of sounds a bit
complicated but it is only three eq
moves
all put together and that's tightening
up the low end i'll just play you out so
you can hear how that's
[Music]
take you working
[Music]
i'll take it
so that's how i eq sub bass
sometimes if it needs it so make sure
you use your ears
now i'm coming up to 30 000 subscribers
when i hit 30 000 subscribers i will be
giving something very special away
so if you aren't a subscriber and i know
that 70
of the people that watch this these
videos aren't subscribers so if you've
forgotten
please hit the subscribe button and that
means that you'll be notified
when i'm uh giving away that big prize
i hope you've enjoyed this make sure you
like the video too that really helps me
out with the algorithm on youtube i'll
see you in the next one
um
5.0 / 5 (0 votes)