How to Change Flat Tire with Spare 07-14 Chevy Suburban

Summary

In this step-by-step tutorial, Mike from 1A Auto guides viewers through the process of changing a flat tire, from preparing the car and using the jack to securing the spare tire and tightening the lug nuts. With clear, easy-to-follow instructions, he explains how to safely lift the vehicle, remove the flat tire, and install the spare. Additionally, Mike demonstrates how to properly store the tools and offers tips for ensuring the spare tire is securely in place. Visit 1A Auto for high-quality auto parts, expert service, and fast, free shipping.

Takeaways

• 😀 Make sure the car is parked on a flat, stable surface before starting the tire change.
• 😀 Always use wheel chocks behind the opposite tire to prevent the vehicle from rolling while you work.
• 😀 To lift the car, locate the correct jack point on the vehicle's frame, usually indicated in the manual.
• 😀 Loosen the lug nuts before lifting the vehicle, applying foot pressure if necessary to break them loose.
• 😀 When lifting the car, ensure the flat tire is off the ground, allowing you to remove the lug nuts and tire.
• 😀 If the wheel is stuck, you can kick the edge of the tire or use the lug nuts to help break it loose.
• 😀 Align the spare tire properly on the axle and hand-tighten the lug nuts before lowering the car.
• 😀 Tighten the lug nuts in a crisscross pattern to ensure an even fit, and ideally to 100 foot-pounds if possible.
• 😀 Lower the car slowly using the jack, ensuring it is securely back on the ground before removing the jack.
• 😀 After lowering the car, double-check that all lug nuts are tightly secured before driving.
• 😀 Stow the tools, flat tire, and spare tire properly, and remove the wheel chocks before continuing your journey.

Q & A

What is 1A Auto known for?

1A Auto has been selling auto parts for over 30 years, focusing on delivering high-quality auto parts, expert customer service, and fast, free shipping, all backed by a 100% satisfaction guarantee.

What should be the first step when changing a flat tire?

The first step is to ensure the vehicle is stable by using wheel chocks on the opposite wheel to prevent rolling, followed by gathering necessary tools and preparing the jack.

How do you use the car’s jack properly?

To use the jack properly, locate the designated spot under the vehicle where the beams come together. Then, insert the jack’s square end, extend it, and turn counterclockwise to lift the vehicle.

What should you do if the wheel is stuck while trying to remove it?

If the wheel is stuck, you can either kick the edge of the wheel to break it loose or, as a last resort, put a couple of lug nuts back on and lower the car slightly, then shake the car to help release the wheel.

What is the correct method for tightening lug nuts after changing the tire?

Once the car is back on the ground, tighten the lug nuts in a crisscross pattern to ensure even pressure. It’s essential to tighten them to 100 ft-lbs, but on the side of the road, it's best to tighten them as much as possible using a tire iron.

What should you do with the spare tire once the job is completed?

Once the tire change is complete, you should place the flat tire in the back of the vehicle for later repair, and make sure all the tools are properly stowed away in their respective places.

How can you prevent damage when using the tire iron to loosen lug nuts?

To avoid damage or excessive strain, you can place the tire iron on the lug nut, ensure it’s secure, and then use your foot to step on the tire iron to loosen the lug nuts. This can give you more leverage.

How do you stow away the tools after using them?

To stow the tools, place the square ends of the jack in the pouch first, followed by the lug wrench. Then, fold over the pouch and latch it, ensuring the tools are secured inside. Place the wheel chocks and the jack back into their designated spaces.

What should you do if the spare tire carrier is still on the ground after completing the tire change?

After the tire change, you need to lift the spare tire carrier back up off the ground using the jack. This step ensures that the carrier is in its proper position for future use.

What is the importance of the 1A Auto satisfaction guarantee?

The 1A Auto satisfaction guarantee ensures that customers can trust the quality of the products they purchase. If they are not satisfied, they can rely on the company's customer service to resolve any issues.