Solda TIG - Dicas iniciais para soldar alumínio
Summary
TLDRThis instructional video script details the process of performing welding work using a tungsten electrode with lanthanum, which is golden in color, and of 2.4 or 3.2 millimeters diameter. The video instructs viewers to start by taking a piece of aluminum with a thickness of 3 to 5 millimeters and to make a scratch on it for good electrical contact. It emphasizes the importance of maintaining a clean and clear weld pool to ensure quality. The script also highlights various techniques such as maintaining the electrode at the right angle, using a sequence to avoid contamination, and adjusting the welding current for optimal results. The video concludes with a clean and clear weld, showcasing the effectiveness of the described methods without the use of any special cleaning products.
Takeaways
- 🛠️ The video demonstrates using a tungsten-lanthanum electronic with a golden color and a diameter of 2.4 or 1/32 inches for welding tasks.
- 🔨 The initial step involves taking a piece of aluminum with a thickness of 3 to 5 millimeters, and making a scratch on it to ensure good electrical contact for welding.
- 🌟 A 5-millimeter thick aluminum piece is used in the demonstration to show the welding process.
- 🔧 The importance of maintaining good electrical contact is emphasized for a flat and clean weld.
- 👨🔧 The video instructs to practice on a welding table to achieve a good electrical contact and a flat weld.
- 🔬 It mentions the use of a pencil to help with the welding process, although it could be lost, indicating the need for precision and care.
- 🎯 The presenter shares their preferred method of holding the torch without it, which might be easier and more secure.
- 🔥 The video explains the technique of 'drop-by-drop' welding, emphasizing a steady hand and a well-supported torch.
- 💧 The presenter advises on the correct way to clean the welding area to avoid contamination and ensure a clean weld.
- 📈 The script mentions adjusting the amperage if the welding pool is too low or if the transition is slow, indicating the need for flexibility in welding techniques.
- 🔍 The importance of observing the welding pool and adjusting the technique accordingly is highlighted, such as increasing the speed or amperage for better results.
Q & A
What type of soldering equipment is mentioned in the script?
-The script mentions using a tungsten electrode with lanthanum, which is gold in color, with diameters of 2.4 or 1.3/32 inches.
What is the thickness of the aluminum piece mentioned for the soldering process?
-The thickness of the aluminum piece mentioned in the script ranges from 3 millimeters to 5 millimeters, with a specific example of a 5-millimeter thick piece.
What is the importance of making a scratch on the aluminum piece before soldering?
-The scratch is made to ensure good electrical contact and to facilitate the soldering process by guiding where the solder will flow.
What does the script suggest to do to ensure a good electrical contact during soldering?
-The script suggests practicing on a soldering station to achieve a good electrical contact for the soldering position.
What technique is used to avoid contamination of the soldering process by the air?
-The script mentions keeping the soldering tip well inclined and using a sequence to protect the solder from contamination by the atmospheric air.
How does the script describe the soldering tip movement for a clean and clear solder joint?
-The script describes a technique called 'gota-a-gota', which involves a steady, drop-by-drop application of solder with the tip well supported.
What is the recommended angle for the soldering torch during the soldering process?
-The script suggests an angle of 0 to 10 degrees for the soldering torch to ensure proper heat distribution and avoid contamination.
What is the importance of cleaning the soldering tip after use?
-Cleaning the soldering tip after use is important to prevent contamination and maintain the quality of future solder joints.
What is the purpose of using a sequence in the soldering process as mentioned in the script?
-The sequence is used to organize the soldering process, ensuring that the solder is applied at the right time and in the correct amount for a clean and professional result.
How does the script suggest adjusting the soldering process if the solder is not flowing properly?
-The script suggests increasing the temperature, indicated by adjusting the 'benazzi', to ensure proper solder flow.
What is the final appearance of the soldered joint as described in the script?
-The final appearance of the soldered joint should be shiny, clear, and clean, without the need for any special cleaning products.
Outlines
🛠️ Welding Process with Tungsten and Lanthanum Alloy
The script describes a detailed welding process using a tungsten and lanthanum alloy, which is golden in color and comes in diameters of 2.4 or 13/32 inches. The first step involves taking a piece of aluminum with a thickness of 3 to 5 millimeters and making a groove in it. The focus is on ensuring good electrical contact for the weld. The video demonstrates the technique of welding, emphasizing the importance of maintaining contact and practicing on a flat surface. It also discusses the use of a carbon electrode and the correct way to hold the torch for a clean and effective weld. The script mentions the importance of keeping the welding area clean and free from contamination, and concludes with a demonstration of the proper way to use the welding torch and maintain the quality of the weld.
💡 Tips for Clean and Effective Welding
This paragraph provides additional tips for achieving a clean and effective weld. It starts by emphasizing the importance of a good cleaning action, which results in a brilliant appearance without the need for any special accessories. The script suggests using a flat chisel to make a groove and then practicing a sequence of steps to achieve a clean weld. It also points out common mistakes, such as a low amperage setting that can slow down the welding process and result in poor weld quality. The video offers a solution by increasing the amperage and adjusting the torch angle for better results. It also highlights the use of a variable trigger torch and a pedal for more control. The script concludes by showing the final appearance of the welds, which are bright, clear, and clean, without the use of any cleaning products, and thanks the viewers for watching, reminding them to like, share, and subscribe.
Mindmap
Keywords
💡Tungsten Electrode
💡Lanthanum
💡Aluminum Scrap
💡Electrical Contact
💡Soldering Iron
💡Solder
💡Contamination
💡Soldering Technique
💡Soldering Flux
💡Cleaning
💡Safety
Highlights
Utilization of a tungsten-lanthanum electronic with a golden color and diameters of 2.4 or 13/32 inches for the works.
Starting with a piece of aluminum with thicknesses ranging from 3 to 5 millimeters.
Creating a scratch on the aluminum piece to ensure good electrical contact for soldering.
Technique of using a flat tip for soldering to ensure a clean and effective connection.
The importance of maintaining good electrical contact for the soldering process.
Demonstration of soldering a flat surface and the technique used to achieve it.
Learning to handle the soldering iron and describe the process in art.
The method of holding the soldering iron and the importance of practice.
Changing the way of holding for safety and preference in different positions.
Technique of soldering with the torch inclined to ensure a clean solder joint.
The process of signing up for new access with carbon and the importance of the soldering technique.
Maintaining the soldering tip clean by using a sequence to avoid contamination.
Observing the formation of the solder joint and the importance of placing the soldering iron correctly.
Adjusting the temperature of the soldering iron to ensure proper solder flow.
The importance of cleaning the soldering tip to maintain a clear and bright appearance.
Using a sequence to avoid contamination from the atmospheric air during soldering.
Demonstration of the soldering process with a clear and clean solder joint.
Final appearance of the solder joint after the cleaning process, showing a bright and clear result.
The importance of not using any cleaning product and achieving a clean solder joint through proper technique.
Transcripts
[Música]
para fazer estas obras
eu vou utilizar o eletrônico de
tungstênio com lantânio da cor dourada e
o diâmetro dele de 2,4 ou 13 32
polegadas
a primeira coisa que você vai fazer você
pega um retalho de alumínio de espessura
e 3 milímetros quatro milímetros cinco
este aqui é um retalho de cinco
milímetros e faça um risco nele e aí
você então vai começar a treinar o
perdão a fazer por onde o sol no mínimo
precisa de um bom contato elétrico então
e lentes ou dar com a capa
procure sempre aprendendo a ela na
bancada praticar crime no ficar com um
bom contato elétrico para essa posição o
que a sola plana em salvador canal temos
um pedra assim né consegue soldado e
assim maior tv dessa forma aqui nessa
coisa que eu acho que você pega um lado
você pega dessa forma o quilo
e aí você vai aprendendo chapo é um
apoia e descreve ninguém escreve no art
a mesma coisa aqui o jeito que eu pego
lápis pode perder agora vamos ver a taxa
daí olha só o meu nome aqui a apoiar
aqui na bancada daí eu tenho um
movimento bastante trabalhando e
escrevendo muito mais fácil fazer para
essa posição quem poluição plano em
outras posições
nós vamos mudar o jeito de segurança é
nessa posição que eu prefiro sem segurar
assim o e aqui um aspecto brasileiro
fica mais fácil se você já solta com o
processo de assinar novos acessos
carbono você solta com a tocha bem
inclinada como estou fazendo aquilo né
o salvador do sul a apoiar o bocão na
peça ele entra marcelo borjão aqui seja
fazendo esse movimento ou seja técnica
gota-a-gota sempre com o local apoiada
referência que eles têm uma relação para
a solda garrafas ela pode ser bem mais
treinando aqui eu tenho bem mais
respeitada mas para saudarem ano não
para saudarem ano lindo você trabalha
com a inclinação tinham de 0 a 10 gastar
olha só
é também na saudade não dá pra encostar
no local
você trabalhador e sempre ao ar tá então
procuro um bom poema mon colocando a
maleta preta
ela ficou o tempo todo de baixo vocal
para você coloca não retira 40 fora
senhor pra colocar o vai contaminar a
água mas agora já só lá vai ter um
aspecto feio não vai ficar bonita
mantenha sempre pior de bach va usando
uma seqüência só ok
agora vamos utilizar nota o cordão do
som daqui
observe aqui nesta sequência que o
coloca vanitas ambição no início das
apostas depois não vem na extremidade
aqui no final nela não coloca válida de
admissão é no meio lá na porta de
inclusão mas sim na sua extremidade
final dela aqui ó
nem no finalzinho dela
[Música]
observe que eu espero formado em aposta
de busão
só então eu coloco a vareta de adição
exatamente eu não retiro ela na frente
do bocal isso para manter a conta da
mareta edição protegidas da contaminação
pelo ar atmosférico isso vai garantir o
cordão do sol da limpo e claro
veja como ficou o cordão do solo
veja que ele está brilhante com uma
aparência nem mulher nem mesmo a dizer
que nenhum acessório especial
então a ação de limpeza foi muito boa a
marca
outra dica que eu quero
dá pra você pega uma chapa para o risco
do meio à quima maior mais um pouco
treinando uma seqüência de passos aqui
eu faça oferta e depois vá fazendo do
lado tá eu vou mostrar agora na
sequência pra vocês como fazer isso
aí você vai treinando tanto é fazer
aposta e trazer o cordão de solda
retilínea como treinando colocado a
lenda no tempo certo no momento certo
nesta seqüência aqui ó a gente pode
observar que há algo de errado
a corrente ela está um pouco baixo então
a 120 estão um pouco lento
tem que esperar um pouco pra colocar
vale a transição
então é necessário aumentar o benazzi
aqui
aqui sim a pela está mais alta é uma
sequência é um pouco mais rápida observa
de aposta de busão lá tá melhor
distribuída
aqui a operar em toda boa a atrair um
pouquinho baixa mas ainda tá burro à
porta de busão está derretendo bem não
precisa correr tanto é também utilizado
uma tocha com gatilho estivesse
utilizando um pedal inclui é essa essa
alterável usava um pouquinho o pedal
incluir
aqui agora a chapa que ser um pouco né
meu nome é assim na nova imagem lá na
corrente mas a google menor está
derretendo bem cota de inclusão da boa
mesmo aqui como ficarão os acordou e de
solo após em concluir a série aparência
do cordão de sobra que eles estão
brilhantes claros limpos não foi
utilizado aqui nenhum produto de limpeza
e foi exatamente assim que eles ficaram
após a conclusão
a ação de limpeza da margem sola o
espetacular
ok pessoal mais uma vez muito obrigado
por sc
não se esqueça de dar ou não aí e se
você não é inscrito
clique no ícone do canal e se inscreva e
até o próximo vídeo se deus quiser até
lá
関連動画をさらに表示
TIG Welding X-Ray Hack! TIG Technique For Pipe Welding!
1G Plate Stick Welding | SMAW
1G plate stik smaw | root pass ( cara ngelas posisi 1G degan cara tembusan)
VIDEO 1 Dasar Pengelasan Las Listrik (SMAW)-Bagian Mesin Las, Kode Elektroda, Polaritas, Kekuatan.
Stick Welding: #1 Beginner Mistake and How to Fix It
What is STICK Welding? (SMAW)
5.0 / 5 (0 votes)