Biaya Produksi (Bagian 4) : Kurva Biaya Jangka Panjang vs Jangka Pendek
Summary
TLDRIn this lecture, Teuku Warsito, a lecturer at PKN STAN, explains the differences between short-run and long-run cost curves in production theory. He discusses how capital remains fixed in the short run but can vary in the long run, impacting cost structures. The lecture covers expansion paths, optimal input combinations, and differences in cost efficiency between short and long-run production. It also explores economies and diseconomies of scale, where the firm's cost behavior changes with varying output levels, emphasizing the importance of flexibility in capital use for long-term efficiency.
Takeaways
- 📈 The focus of the discussion is comparing long-run and short-run cost curves in production.
- 🏭 In the short run, capital is fixed, while in the long run, both capital and labor are variable and can change.
- 🔄 The expansion path differs between the short run and long run due to the flexibility in changing capital and labor.
- 🚀 In the long run, the expansion path is a straight line from the origin, while in the short run, it's curved due to capital constraints.
- 🔧 Short-run constraints cause the company to adjust labor more aggressively when output increases, unlike in the long run where both labor and capital are adjusted proportionally.
- 💡 Companies have optimal capacities for producing goods, and smaller firms can be more efficient when output is low since capital is used optimally without excess.
- 📊 Long-run average total cost (ATC) curves are generally lower than short-run ATC curves due to the flexibility in adjusting capital in the long run.
- 🏢 Companies of different sizes (small, medium, large) have varying short-run ATC curves, but in the long run, firms can choose the most efficient curve based on output.
- 💰 Economies of scale occur when ATC decreases as output increases, while diseconomies of scale happen when ATC rises with higher output, often due to management or coordination issues.
- 📉 In the short run, when capital is fixed, costs increase more significantly as output grows, compared to the long run where adjustments in capital make production more efficient.
Q & A
What is the main difference between short-run and long-run cost curves?
-The main difference is that in the short run, capital (K) is fixed and cannot change, while in the long run, both capital (K) and labor (L) are variable, allowing more flexibility in cost adjustments.
Why does the short-run expansion path curve bend at certain points?
-The short-run expansion path bends because capital is fixed, so to increase production, the firm must increase labor, causing inefficiencies once a certain level of output is reached. This results in a horizontal stretch, reflecting diminishing returns to labor.
How does the long-run expansion path differ in shape compared to the short-run?
-The long-run expansion path is a straight line originating from the origin (0,0), indicating that both capital and labor can be adjusted optimally to maintain efficiency, unlike the bending short-run curve where capital is fixed.
What happens to the optimal input combination when production increases in the long run?
-In the long run, as production increases, the optimal input combination adjusts by increasing both capital (K) and labor (L) proportionally, ensuring efficiency at higher output levels.
Why is long-run average total cost (ATC) lower than short-run ATC?
-Long-run ATC is lower because firms can adjust all inputs, including capital, allowing them to operate at an optimal scale and avoid inefficiencies present in the short run due to fixed inputs.
What is meant by 'economies of scale' in the context of long-run costs?
-Economies of scale occur when the firm's average cost decreases as output increases, due to factors like input specialization, bulk purchasing discounts, and efficient management.
What are constant returns to scale, and when do they occur?
-Constant returns to scale occur when the average cost remains unchanged as output increases. This happens when the firm is able to increase input proportionally to output without gaining or losing efficiency.
What causes diseconomies of scale?
-Diseconomies of scale arise when increasing output leads to higher average costs. This can happen due to factors like management complexity, inefficiencies in large-scale operations, and limits to input specialization.
What is cost-output elasticity, and how is it calculated?
-Cost-output elasticity is the ratio of the percentage change in total cost to the percentage change in output. It helps measure how responsive costs are to changes in production levels.
When do diseconomies of scale become apparent on a long-run cost curve?
-Diseconomies of scale become evident when the long-run ATC curve starts to rise, indicating that increasing output leads to higher per-unit costs due to inefficiencies in managing larger operations.
Outlines
📊 Differences Between Long-Run and Short-Run Cost Curves
In this segment, the instructor discusses the key differences between long-run and short-run cost curves. The short-run cost curve assumes that capital remains fixed, whereas, in the long run, both capital and labor are considered variable inputs. This difference causes the shapes of the cost curves to vary. In the long run, the expansion path is a straight line from the origin, while the short-run expansion path starts from a fixed point for capital, resulting in a curved shape. This curvature exists because in the short run, the optimal input combination changes due to the fixed capital.
🏭 Flexibility of Production in Long-Run and Short-Run
The second part elaborates on how firms can adjust their capital usage in the long run, making production more flexible and efficient. Small, medium, and large firms have different short-run average total cost (ATC) curves based on their capital sizes. In the long run, firms can choose the most efficient ATC, reducing overall costs by adjusting capital. The long-run ATC curve lies below the short-run ATC curves because firms can alter their production capacities, making them more efficient.
Mindmap
Keywords
💡Short-Run
💡Long-Run
💡Expansion Path
💡Economies of Scale
💡Diseconomies of Scale
💡Average Total Cost (ATC)
💡Marginal Cost (MC)
💡Output Elasticity
💡Fixed Capital
💡Specialization
Highlights
Introduction to comparing long-run and short-run cost curves, specifically expansion paths.
In the short run, capital is fixed, while in the long run, both capital and labor are variable, influencing cost behavior.
Short-run expansion path curves are bent due to capital constraints, while long-run expansion paths are straight.
Optimal input combinations differ between short-run and long-run as production levels increase.
At a higher production level in the long-run, both capital and labor increase, while in the short-run, labor increases more as capital is fixed.
Short-run average total cost (ATC) curves differ based on company size: small, medium, or large firms have different cost curves.
Long-run ATC curves allow firms to choose the most efficient size, leading to lower average costs compared to short-run ATC.
The shape of the long-run ATC curve can be broken into three phases: economies of scale, constant returns to scale, and diseconomies of scale.
Economies of scale occur when ATC decreases as production increases, due to specialization and bulk purchasing of inputs.
Constant returns to scale occur when ATC remains the same as production increases.
Diseconomies of scale arise when ATC increases due to management and coordination issues in larger firms.
Economies of scale are driven by factors such as specialization, effective management, and lower input costs through bulk purchasing.
Diseconomies of scale occur when management becomes complex and discounts on inputs are no longer possible.
Cost-output elasticity is explained as the ratio of cost change to output change, where economies of scale occur when marginal cost (MC) is less than average cost (AC).
Diseconomies of scale occur when cost-output elasticity is greater than one, with MC exceeding AC, leading to inefficiencies at high output levels.
Transcripts
KYT
hai oke semuanya Masih bersama saya
Teuku Warsito dosen PKN stan kita
sekarang sudah memasuki bahasan keempat
dalam seri biaya produksi nah di pasar 4
ini kita akan membahas atau
membandingkan antara kurva biaya jangka
panjang dengan kurva biaya jangka pendek
Oke kita mulai pertama kita akan
membedakan expansion valve sopran dengan
Lauren expansion B jangka pendek dengan
jangka panjang tapi sebelum kita
membedakan kita review sedikit jadi kita
sudah mempelajari bahwa dalam jangka
pendek atau so turun SR jumlah kapitel
itu tetap tidak berubah sedangkan dalam
jangka panjang atau long Run baik epitel
maupun lebar itu merupakan komponen dari
variable cost nilainya jumlahnya itu
bisa berubah-ubah nah perbedaan
karakteristik ini
buat bentuk expansion petnya berbeda
seperti tampak seperti dalam Gambar
disamping untuk long-run expansion
petnya itu berupa garis lurus dari titik
Origin titik 0,0 kemudian naik ke kanan
atas sedangkan expansion packs dalam
jangka pendek itu bengkok yang awalnya
berasal dari teori Jean kemudian naik
mengikuti atau sama dengan Laura text
presented tapi sampai titik tertentu
sampai batas skeptical maksimal tertentu
nilai atau bentuk dari expansion part
Nia ini akan menjadi horizontal sehingga
tampak seperti bengkok nah Kenapa
demikian seperti ini akan kita bahas
misalnya dalam jangka pendek Kak yang
digunakan adalah maksimal atau tetap
sebesar
jika satu jadikan satu ini adalah
kamakshi Mal dalam kondisi ini saat
isophon his = 1 maka kombinasi input
optimalnya baik long-run maupun sopran
itu sama yaitu l atau lebar sebanyak
l1dan Capital sebanyak ke-1 namun saat
berusaha ingin menaikkan produksinya ke
level hisama dengan G2 terjadi perbedaan
kombinasi input optimal dalam long-run
kombinasi optimalnya adalah lebar
sebanyak L2 dan kapital sebanyak K2 ada
penambahan baik lebar maupun Capital
disini sedangkan dalam so terang karena
sifatnya Capital tadi tidak bisa diubah
untuk mencapai output sebesar Q = G2 mau
Tidak mau dengan menaikkan lebar secara
besar atau serat tinggi yaitu di titik
L3 jadi kombinasi optimalnya sekarang
adalah
terbesar L3 dan kapital sebesar K1 nah
Oleh karena itu seperti yang saya
utarakan sebelumnya akan menyebabkan
bentuk expansion pt.mia berbeda antara
sopran dengan long-range Nah sekarang
point kedua pembeda antara so Trump
dengan longsoran adalah kurva atk.di
tetapi sebelum membedakan kita pelajari
dulu konsepnya perusahaan itu mempunyai
kapasitas optimal untuk memproduksi
barang dan jasa Nah coba dibayangkan
saat outputnya sedikit atau kecil tentu
ukuran perusahaan yang kecil dalam hal
ini cap misalnya kecil itu akan lebih
menguntungkan karena apa Karena kapital
akan digunakan secara optimal tidak ada
kelebihan Capital disini tidak ada ke
vitalnya menganggur di sini nah saat
output yang dihasilkan ingin dicentang
ditingkatkan tentu penggunaan kapital
besar akan lebih menguntungkan C nah
dalam jangka panjang itu terdapat
fleksibilitas dalam penggunaan kapital
nah fleksibilitas ini dalam penggunaan
kapital maupun menyesuaikan ukuran
perusahaan akan membuat Everett Scott
all cost atau etc dalam jangka panjang
long-run itu lebih rendah dibandingkan
pada saat jangka pendek atau Soccer
ad6bih Soalnya ada tiga ukuran
perusahaan small medium dan large ini ke
besar kecilnya perusahaan ini
menunjukkan besar kecilnya kapital yang
digunakan oleh perusahaan tersebut nah
masing-masing perusahaan tadi itu akan
mempunyai kurva short-run atk.di yang
berbeda-beda juga ya jadi soto etc etc
berbeda-beda atk.di dalam jangka panjang
perusahaan
ndak bisa mengubah jumlah kep detailnya
Sehingga dalam jangka panjang perusahaan
itu bisa memilih atc4 link efisien
Hai HTC yang paling efisien sesuai
dengan Hye atau output yang dihasilkan
oleh perusahaan tersebut misalnya dalam
loran jika perusahaan akan memproduksi
barang kurang dari Hye maka perusahaan
akan memilih atk.di PSA banyak epitel
yang digunakan relatif kecil namun jika
produksinya antara hiadan GB maka
perusahaan akan memilih atk.di P medium
artinya nilai kapitalnya ditambah dan
jika ingin memproduksi lebih dari GB
maka perusahaan akan memilih atk.di PL
artinya menambah lagi ke vitalnya ada
banyak tipe perusahaan dengan kapital
atau ukuran perusahaan yang berbeda-beda
sehingga longor anak pc-nya itu terlihat
seperti Gambar disamping nah terlihat
bahwa semua titik di gruva long-range
tdci
berada di bawah Soccer and etc the dalam
artian dalam jangka panjang perusahaan
itu lebih efisien karena bisa mengubah
ukuran dan kapasitas produksinya nilai
average total cost nya akan lebih rendah
dibandingkan dengan sodrun Nah sekarang
kita akan membahas karakteristik bentuk
long-run atk.di kita bisa membedakan
longsoran HTC itu kedalam tiga
karakteristik Berdasarkan perubahan
kosnya perubahan total kosnya seiring
dengan penambahan Ki atau penambahan
output yang pertama adalah ekonomis of
skill yaitu Saat atlet turun ketika high
meningkat yaitu terjadi saat Kim masih
sedikit dan dukung spesialisasi yang
kedua adalah konstan Returns to scale
yaitu atk.doc berubah saat Kim meningkat
dan yang ketiga
akhir-akhir adalah disekonomi softskill
yaitu atk.di kaki meningkat yaitu
terjadi saat kita tinggi sebagai akibat
masalah manajemen dan koordinasi Nah
sekarang kita akan membahas ekonomi
softskill tadi ekonomi softskill terjadi
saat output yang diproduksi masih
sedikit tadi kita sudah sempat
menyinggung nah ekonomi soft-skill itu
terjadi karena beberapa faktor misalnya
adalah yang pertama spesialisasi yang
kedua saat lebar dan keito masih sedikit
manajer itu bisa mengelola produksi
lebih efektif dan yang ketiga dia input
akan lebih murah jika input dibeli
dengan jumlah gelondongan dengan jumlah
yang banyak jadi semakin banyak input
dibeli semakin murah nah keadaan ekonomi
soft skill ini terjadi saat nilai.cos
output elasticity nya kurang dari 1
yaitu Saat MC kurang dari Aceh Apa itu
kos output elasticity
di kos output elasticity ini merupakan
perbandingan antara perubahan kos
dibanding dengan persentase perubahan Ki
jadi selagi kosot Put elasticity ini
merupakan perbandingan persentase
perubahan kos dibanding dengan
persentase perubahan Hei jadi
elastisitas output elasticity ini
rumusnya Delta jprc dibagi dengan Delta
Ki pergi yaitu McD dibagi dengan Aceh
Sekarang kita akan membahas disekonomi
softskill saat output sudah banyak
terjadi di sono myself skill karena
beberapa faktor yang pertama bekerja
menjadi tidak efektif karena terbatasnya
spesial mesin punya kedua manajemen
menjadi lebih kompleks kemudian tiga
diskon dalam membeli input yang belum
dengan tadi sudah
small sudah di tidak bisa ditambah lagi
Oke Oleh karena itu ora oleh karena itu
terjadi Utis konomi softskill nah secara
kurva kita bisa lihat di kurva sebelah
kanan disekonomi softskill itu terjadi
saat longsoran WTC itu naik seiring
dengan bertambahnya output kalau kita
lihat itu akan terjadi saat MJ itu lebih
besar daripada AC sehingga disekonomi
soft skill ini terjadi saat kos output
elasticity nya lebih dari 12
関連動画をさらに表示
Biaya Produksi (Bagian 3) : Kombinasi Input Optimal
Deriving the Long Run Marginal Cost Curve
Derivation Of Long Run Marginal Cost Curve (LRMC) | Ecoholics
Biaya Produksi (Bagian 2) : Kurva TC, FC, VC, MC, ATC, AFC, AVC (Biaya Produksi Jangka Pendek)
Microeconomics Unit 3 COMPLETE Summary - Production & Perfect Competition
Función de producción y ley de rendimientos marginales decrecientes | Microeconomía | Libertelia
5.0 / 5 (0 votes)