จัด Fitment ใหม่ S15 ก่อนขึ้น Dyno

Summary

Скрипт видео рассказывает о сложном процессе обслуживания автомобиля Silvia, включая установку запасных частей, настройку кампера задней оси, покупку и установку шин, а также тюнинг и настройку двигателя с учетом мощности и потребления масла. Также описывается визит в магазин Tuner Concept для получения заднего регулятора кампера и выбора подходящих шин BF Gforce Venom. В видео упоминается проблема негладкого ходячего режима и потреблением масля, что требует дополнительной диагностики и корректировки. В конце скрипта авторы обсуждают планы по улучшению внешнего вида автомобиля и его дальнейшей настройке.

Takeaways

• 🚗 В видео скрипте описывается процесс работы с автомобилем Silvia, включая закупку запчастей, настройку и испытание.
• 🛠️ Скрипт упоминает установку заднего регулятора наклона и покупку шин для автомобиля Silvia, что указывает на работу по настройке и улучшению хода.
• 🔍 Внимание уделяется деталям, таким как выбор и установка шин разных размеров, что важно для достижения нужной геометрии и производительности.
• 🛒 Снятое видео демонстрирует посещение магазина Tuner Concept для получения запчастей, включая рейд-камбер-регулятор.
• 🏎️ В видео упоминается, что автомобили настроены на высокую мощность, около 500 л.с., но с негладкой работу на низких оборотах и проблемой с расходом масла.
• 🛠️ Снятая зарядка включает в себя работу с инжекторами, которые проверяются и меняются для улучшения работы двигателя и уменьшения расхода масла.
• 🔧 Скрипт содержит обсуждение регулировки подвески и выбора подходящих инжекторов, что важно для достижения оптимального баланса между производительностью и эксплуатационными характеристиками.
• 🎶 Видео сопровождается музыкальными участками, что добавляет динамичности и энергии описываемым действиям.
• 🔄 В процессе работы с автомобилем упоминается необходимость перестройки и повторной настройки после замены шин и инжекторов.
• 👨‍🔧 Снятое видео демонстрирует взаимодействие с несколькими специалистами, такими как Brother Tong и Pee Max, для решения технических задач.
• 🚧 Скрипт подчёркивает значимость правильного выбора и установки шин и инжекторов для обеспечения безопасности и производительности автомобиля.

Q & A

Что было сделано с автомобилем Silvia?

Автомобиль Silvia получил задние регуляторы наклона, покрышки и был отремонтирован с целью улучшения подгонки и производительности.

Какова была проблема с автомобилем после тюнинга?

После тюнинга автомобиль имел проблему с гладким ходом на низких оборотах и потреблял много масла.

Что такое 'Pee Max' и как он связан с этим видео?

Pee Max является персонажем в видео, который помогает с диагностикой и ремонтом автомобиля, включая проверку и замещение инжекторов.

Какие покрышки были установлены на Silvia?

На Silvia были установлены покрышки BF Goodrich G-Force Venom, размерами 245/40/18 сзади и 235/40/18 спереди.

Что означает 'фитмент' в контексте этого видео?

Фитмент в этом контексте относится к процессу установки и настройки покрышек и компонентов автомобиля для оптимального вписывания и производительности.

Какой был план по участию в событии 'Under up'?

Если бы не получилось успеть с подготовкой автомобиля, планировалось обратиться к Pee Max для удаления колес, а затем идти на событие 'Under up'.

Что такое 'Tuner Concept' и как оно связано с этим видео?

Tuner Concept является местом, где персонажи видео получают запчасти, такие как задние регуляторы наклона для автомобиля.

Какие инжекторы были установлены на автомобиль и почему их меняли?

На автомобиле были установлены инжекторы на 1600 см³, которые вызвали проблемы с потреблением масла и гладким ходом. Из-за этого планировалось установить инжекторы на 1000 см³.

Чем занимается Brother Tong и как он связан с этим видео?

Brother Tong является специалистом, который помогает с установкой и настройкой покрышек и подвески на автомобиле Silvia.

Что означает 'балансировка' в контексте этого видео?

Балансировка в этом контексте относится к процессу настройки и проверки колес автомобиля для достижения оптимального равновесия и производительности.

Outlines

00:00

🔧 Автомобильные запчасти и настройка Silvia

В этом параграфе описывается план на день, который включает в себя покупку запчастей для автомобиля Silvia и работу с ним. Говорящий собирается в магазин Tuner Concept для получения заднего регулятора наклонной угловой 'camber adjuster', затем планирует установить шины на Silvia. Упоминается, что автомобиль уже настроен и имеет около 500 л.с., но есть проблемы с гладкой работы при холостом ходу и поглощением масля. Также затрагивается тема поиска помощи у специалиста по двум и probleme с системой впрыска топлива.

05:03

🛒 Выбор шин и консультация по установке

Параграф посвящён процессу выбора и установки шин на задние и передние колеса автомобиля. Говорящий рассматривает разные варианты шин BF с разными размерами, обсуждает сложности с установкой и предпочтения по дизайну. Также затрагивается тема выбора подходящих инжекторов в магазине инжекторов и замены инжекторов в автомобиле из-за проблем с потреблением топлива.

10:03

🔧 Ремонт и настройка инжекторов

Здесь описывается процесс обращения в магазин инжекторов для консультации и замены инжекторов в автомобиле. Говорящий обсуждает с Пик Макс возможные проблемы с инжекторами, которые могут вызывать проблемы с двигателем. Также упоминается необходимость перестройки и настройки инжекторов после замены.

15:04

🚗 Проблемы с настройкой и планы на будущее

В этом параграфе обсуждается текущий статус проекта по настройке автомобиля и проблемы, с которыми сталкивается говорящий. Упоминается неправильная установка крылья и необходимость её исправления. Также обсуждается план на будущее, включая возможное изменение инжекторов, настройку подвески и другие механические работы.

20:09

🛠️ Установка новых шин и подвески

Параграф рассказывает о процессе установки новых BF G-Force Venom шин на автомобиль и о том, как это влияет на внешний вид и характеристики автомобиля. Также здесь обсуждается возвращение старых шоков и их переработка, а также планы на установку новых подвесок и настройку автомобиля.

25:16

🎶 Заключительные приготовления к событию

В заключении подводятся итоги проделанной работы и описываются планы на будущее. Говорящий упоминает о том, что машина готова к участию в событии Under Up, а также о том, что будут продолжены работы по настройке и улучшению автомобиля после события.

30:18

🚧 Проблемы с установкой и настройкой

В этом параграфе обсуждается сложность процесса установки и настройки новых шин и подвески на автомобиль. Говорящий делится своими опасениями о том, что шины могут быть слишком толстыми и неподходящими, и что это может вызвать проблемы с ходом и дизайном автомобиля.

35:23

🔧 Дополнительные работы и настройки

Параграф посвящён дополнительным работам, которые необходимо выполнить для достижения идеальной настройки автомобиля. Здесь рассматривается вопрос о том, насколько сильно должны быть изменены параметры подвески и как это повлияет на внешний вид и работу автомобиля.

40:23

🚗 Тестовый прогул и окончательная настройка

Здесь описывается процесс тестового прогула после установки новых шин и проведения дополнительных работ. Говорящий делится своими впечатлениями о том, как автомобиль ведет себя на дороге, и о том, какие изменения будут внесены для улучшения.

45:27

🛠️ Заключительные замечания и планы

В заключении говорящий подводит итоги проделанной работы и обсуждает свои планы на будущее. Упоминается необходимость дополнительной настройки и тестирования автомобиля, а также ожидания относительно его производительности и внешнего вида.

🎶 Музыкальные заметки и заключение

В заключении параграфа присутствуют музыкальные заметки и финальные замечания о проделанной работе. Говорящий выражает удовлетворение результатами и делится своими планами по дальнейшим улучшениям автомобиля.

Keywords

💡Silvia

Silvia в контексте видео — это модель автомобиля Nissan S-chassis, часто используемая в тюнинге и автоспорте. В видео упоминается, что требуется запчасть для Silvia, что указывает на тему автотюнинга и обслуживания.

💡Тюнер консцепт

Тюнер консцепт (Tuner Concept) — это, вероятно, название магазина или места, где происходит обсуждение или покупка запчастей для автомобиля. В видео это место, где герой идет за закупкой заднего камерного регулятора.

💡Камерный регулятор

Камерный регулятор — это деталь суспензии автомобиля, позволяющая изменять углы положения колеса, что важно для улучшения ходовости и маневренности. В видео это один из элементов, которые герой собирается установить на свою Silvia.

💡Шины

Шины — это одно из ключевых элементов автомобиля, которые влияют на его ходовость и надежность. В видео герой заботится о покупке и установке новых шин на свою Silvia, что является важным этапом в подготовке к событию.

💡Подгонка

Подгонка — это процесс выбора и установки шин и дисков на автомобиль так, чтобы они соответствовали друг другу и обеспечивали наилучшую работу. В видео упоминается, что подгонка еще не произведена, что указывает на то, что работа над автомобилем не завершена.

💡Тюнинг

Тюнинг — это процесс модификации автомобиля для улучшения его производительности, внешнего вида или других характеристик. В видео автомобиль уже откалибровано и имеет около 500 л.с., что является результатом тюнинга.

💡Пик Макс

Пик Макс (Pee Max) — это, возможно, имя персонажа или места, связанного с обслуживанием автомобиля. В видео упоминается, что Пик Макс проверяет головку двигателя героя, что показывает, что он занимается техническими работами.

💡Инжекторы

Инжекторы — это компоненты системы впрыска топлива в двигателе, которые доставляют топливо в combustion chamber. В видео герой замечает проблему с инжекторами, которые потребовали замены, что является важной частью обслуживания двигателя.

💡Динамометрия

Динамометрия — это процесс измерения производительности двигателя, обычно на специальной станции (динамометре). В видео упоминается, что машина прошла динамометрию, что указывает на то, что производительность двигателя была измерена и откалибрована.

💡Полиризация

Полиризация — это процесс глажения и улучшения внешнего вида поверхностей, например, дисков или корпуса автомобиля. В видео упоминается, что после установки шин не было времени для полировки, что является одной из последующих работ по уходу за автомобилем.

Highlights

Постоянная работа по доставке запчастей для Silvia и текущий спрос на услуги.

План на сегодняшний день включает в себя покупку заднего регулятора наклонной угловой и установку новых шин на Silvia.

Проблемы с настройкой, неравномерное замедление и повышенное потребление масла в автомобиле с 500 л.с.

Проверка головки и инъектора двигателя для устранения проблем с маслом и утечками.

Визит в магазин Tuner Concept для покупки заднего регулятора наклонной угловой и обсуждение различных типов регуляторов.

Выбор шин BF Goodrich G-Force Venom с определением размеров для передних и задних колес Silvia.

Обсуждение влияния шинного профиля и натяжения на внешний вид автомобиля и его характеристики.

Визит в магазин инъекторов для замены инъектора на 1000 см³ вместо 1600 см³ из-за проблем с маслом.

Проблемы с настройкой при установке новых шин и необходимость корректировки для достижения идеальной подгонки.

Опыт с настройкой и установкой новых компонентов, включая регуляторы и инъекторы, для улучшения производительности автомобиля.

Визит к мастеру по настройке колес для помощи с подгонкой и установкой новых шин.

Обсуждение важности правильного натягивания шин и выбирать подходящий размер для оптимальных характеристик.

Исследование влияния новых шин на внешний вид и производительность автомобиля после установки.

Проблемы с балансировкой и натяжением при установке новых шин и корректировка для достижения лучшего результата.

Визит к Brother Tong для помощи с настройкой и обсуждение возможностей улучшения подuspечки.

Обсуждение планов на будущее, включая участие в событии Under up и дополнительные работы над автомобилем.

Transcripts

[Song]

[Song]

Oh

[Song]

[Song]

[Song] Hello, today I postponed the car early in the morning.

The work is very magnificent. Today we will go. Running spare parts for a Silvia. We're quite busy lately.

The side that doesn't rest his voice rarely has a day. I'm going to go run the spare parts first. I'm

going to go to the Tuner concept first. I'm going to get the rear camber adjuster. Then I'm going to go get the tires and put them on

the Silvia. They said that the fitment hasn't happened yet. BF has it. Get some tires and we'll run.

Get the tires first and then we'll talk about it later. What to do with the fitment is that now the car is tuned.

It's finished. It's finished with about 500 horsepower, but idling isn't smooth.

And I'm consuming a lot of oil. Pee Max is checking my head. I'm injecting it, I don't know if it's leaking or what it is.

That is, it was too cruel to eat. At first, I thought That if June is over, I'll go find you.

Tong in order to go arrange the fitment, but if it's really not in time Because right now we have to go to an event Under up

, which if we really aren't in time, we think we'll Go find Pee Max and have Pee Max take off the wheels.

Yes, let's go and find Brother Tong for Brother Tong. Let's change things and then let's arrange the fitting.

It's because P'Max did it. They work together to deal with the same issues.

I'll have to see where I'm going first. Let's go get the stuff first.

[Song] Yes, I've reached the tuner Concept. I've just heard

[Song]

. Mainly I'm just lucky, but these wild ones, right? Yes, luck will be the latter. This one is the equipment.

Yes, there is a rear adjuster. Yes, it has one. How many types? What is the difference between A's and A's? 1, 2,

3. How are they different? Emphasis on lowering the camber. Personally, this is what it will be.

For those who put on the wheel base trim, it will It will widen and try to set the map to fall.

It's going to be a little long because otherwise if tomorrow The answer is that it will smell a lot.

It will be a little. Yes, this one will be great. You don't have to spread it too much, it will be stronger.

This is like this, this is for those who reject it. It's low to the ground. I'm the type of person who...

The chassis is oily and low to the point of getting stuck. This will dodge a lot, especially the sound. It will dodge.

There are a lot of them, but these are my normal ones. It will do it and dodge it. Most of the time, 95%,

these are enough. Ah, there will be these. Something like putting 15" wheels on it.

Is it stuck to the floor or something? If you want to use it like this, I recommend it.

Whichever type it is, mine is probably short. Yes, but it might not be very good.

It should be a normal body. It's my normal size. Actually, this one already has both cars, right?

This is the last call. This one was made for. Run away too.

Oh, and there are those like High C Del. Or are they direct calls?

There will be a dodge for drift cars. Don't be silly. Oh, there is. Like Radiff too, yes there is a lot of dodging, little dodging from this one.

Yes, I've got a pair. I'm here to pick them up. June 2019

We will organize the fitness center all at once so that we can set up the center. The only thing about the S15 is that you already have it in stock, right

? Yes. It's the main body. Most of them are in stock, right?

This will be Ball Joy, but it's unique. The tuner is said to have dust protection as well.

The Joy is more durable than some people think. It's like a rubber boot, but it's not really a boot.

Joyco is ready. Come to pick up the camber adjuster. After it's attached to the body, it doesn't

[music]

I can handle it. Let's get the rubber. I got vf and put it on. This one will be the same pattern that we put on

fk. This will be gforce vom.

Rearranging the fitment, now we will choose the back size to be 245 40 18

and the front to be 235 40 18. It probably should bring up the story here. It's enough to fit.

Is it fat? It's difficult to arrange. We'll try. Look, I really like the sidewall pattern and tread pattern of this one. Then

I put it in FK and I liked the V, so I had to choose BF. Let's go and put it in the car.

Because

really, 2 of 45 4648 are not. Gradually, there will be a lot of cars that can use 2, 35, 40. They will also

use Civics, 8 and a half inches, or anything like that. They can use 23 right now. It's the bass. Customers will

be Civics, right? Civics. We have both Civics and Altis. Do you have a Camry or something

? Like, sometimes when they move up to a size 18, they'll wear 2 25 4 10 18 2 35 4 188

2 4540. Most of them don't have it. It's a size that doesn't have a lot of Dean in it, so we

I didn't put a lot of numbers in it so I couldn't. We don't have many, but if we have 235 all the time, right now it

's 245. I think we should go with all our heart to 11. No, are we Bae or not? We should probably have to Bae a little and Bae a little. Yes.

It's probably as good as it gets. I guess I'm a style enthusiast, but it probably isn't.

Got a lot of running patterns, can't use this one today. It's not like I'm focusing on anything like that, just running.

Probably running at a certain level. OK, just a moment. It is said that if it is pulled, the future will decide on the size.

You can do it again, no problem, but I like it. The tire tread and sidewall of this bf already exist.

Yes, let's go. We should go pick up the injectors at the injector shop. Just in case, P'Max.

I checked and our injector is probably 1,600 cc. It injects too hard, it eats up oil and it messes with you.

The original cycle couldn't be lighter, it really didn't walk smoothly. The car is finished and we'll go get 1000

cc at the injector shop right now. Teacher Chakri isn't here but he just ordered it.

Just run and pick it up and you'll get the rubber. It's already finished. We chose to use bf

goodage, gforce Venom, which we put in the Civic fk we're using and we like it.

And his cheeks, which are very pretty and chewy. Moreover, this time, when wearing the S15, it

might have to be pulled a little bit to make sure the size is right. This year, the maximum width is only 245,

and the front is 235. I consulted Brother 1 and gave a rough idea. She said that it's really possible.

If it's 265 like when it came, it probably should be. The power is ok and Brother 1 said that if it were 35

it would be too short. If I were 10 40 short it would still be enough to drive. Let's try it out.

I wonder how much it will pull when I put it in my wheel, which is 8 pounds. It's actually a year old already.

You can wear it, but it can only be worn for a short time. Another thing is that when the rubber is fat,

It's ahead. If it pushes out again, there's an opportunity. that it will press against our fiber cheeks and break it

It's very high, so we had to change the route. It's better to have rubber lugs because the Japanese

They all played with the rubber tires. When we put on the fat tires I have a feeling that it makes my hair look shiny.

It's small, so it looks strange. I don't know how to scrub and scrub my eyes. Well, if Yang Yang is fat, it has to be push-type, that is.

Our wheels have to be pushed out again. Push it out. Came outside the car for a bit and then slowly fell into something.

Hey, when the tires are thin, it will make you feel like the wheels Ours is big enough to have thick rubber that makes the wheels

Lek was annoyed, so I went to get Yang. It's finished. Let's take a look at the shape.

Until what happens

? [Song] Yes, [Song]

Let's continue at the injector shop. Come and get the injection head. Mr. Max said our injector is 1,6 too big. This one,

come and get 1000 cc. This one is talking about it. Take It's been a long time since I parked and couldn't drive at all.

From our English authority, if anyone is looking for someone related to injectors, You can come here and we'll sharpen the injector.

This is a complete service for the car. Injection, where is the test, where is it?

Complete [song]

We received it from the future shop, lung 1000, let's go give it to Pee Max. What are you running today?

Today is a holiday, luckily there's no traffic jams driving across. The blemish only lasts for a moment. If it's any other day, it's normal.

It's definitely difficult. At first I said, "Why is the car so bad?" It's really consuming gas. Brother Max went for a regular tune-up on his car and

added 500 baht. It wasn't all gone, but ours added 800 baht. The dyno ran out of oil and it's like the same old oil.

It's not good, it's not shiny, the injectors are sticky. It's more than the size of a water-sized fish.

Orange, I've thought about it, which is why when I'm E20, it's even more unsatisfactory, so I want to reduce it.

At first, Teacher Kit wanted to put in 1,200, but P'Maek asked for a little more, maybe 1,000. He

didn't want it to be too big because we weren't a car. Like taking it to compete, don't be mad if someone likes it.

I thought I'd already looked at it and was interested in the injector. Whether it's a custom car or a family car, you can come and consult with the

injector shop. It's located around 345. It's a very large shop because it's really normal.

I'm making a family car like FK. I'm doing it. Check. What kind of injector nest is this for cars?

If you're racing a custom car, try asking to see what sizes are available. Sometimes they are representatives of the boss, real bosses.

And I felt like just now there were people pumping pumps. Yes, there are a lot of things. What if?

If anyone is looking for someone related to the fuel system to consult with the injector shop, please contact the injector shop.

[Song] I have arrived at the office. Please stop by to see me.

Pee Max Man June, we didn't arrive in time. Hey, don't go June. New, don't re-tune or you'll change it. Noo G has to go.

New adjustment, the upper wing is wrong, it curves upwards. It has to curve downwards, it has to go to that side.

Is this the wrong side? Can you see that it's curved up? On top, it's stuck here and there. It's stuck here. It's stuck in the car. Oh, that's right.

It's left and right. Oh, I put it on the wrong left and right. Oh my gosh. It's okay, just exchange for a new one.

It's better if you get a new one, sir. It's already been injected, and

I'll give it to you. At first, Max said to drink oil. Are you shocked? Wow, mine was originally 500. I went up

and tuned it for several runs and don't come back. I can come back here. No, it's not red. Oh, this is it. My younger sibling said, "Hey, bro."

It's red again. Oh wow. It's done. This is equal. It's finished at about 500. Give Max 500. 500 a little bit.

500 a little bit. We'll change this one soon. The injector is tuned again, then it will be tuned soon.

You can get a new one. It will be smooth because of the nozzle. It has changed and must be tuned every other time.

It's not easy to idle. Is this right? Oh my gosh. I can't walk at all. It must be over 3,000.

But when I'm on the dyno, when I can rev it, it's smooth. Yes, it really was like that when the machine came around.

It's already been tripping since the beginning. And when the rpm is high, it will suddenly become high when the rpm is high.

Even though it's okay, the tuner kept it for me from the beginning. It happened and when the episode was about to be finished I said no.

I can't tell if it's 1,600 if it's a brand. Otherwise, it should probably be li. This is not li.

Go down like he did the first lap before going up. Store it for use first, then store it for use.

I can't tell you, I can't tell you, I can't open the key, it's High. So this one isn't like a hi-boot, is it?

We don't use electricity to adjust the electric boots. This thing is a mess. Press close, close, and open in a moment.

Should have removed the wheels and Pee Max for you. Yes, that's right. Otherwise, I'll go get the shock absorber tomorrow.

Ta Som's things were returned to P'Tong and then given to P'Tong. Let me change the tires and I'll have Pee Max do it for you.

Get fit at once, then fine-tune, and then fine-tune. When finished, I'll set up the center later.

Yes, around here, we can run here just a bit. that otherwise he would have to drive Sylvia away

I've moved here, and one more thing in case I don't. Just in time, I'll take the shock off for you and I'll take it.

Give P'Tong's place back.

Oh, I'm working on the second job.

Yagi bf has beautiful flowers. I'll let P'Tong take care of this. But wait.

Come back and finish organizing the fibeng at Wujun. I will just set up the center only.

[

Song] This is even more possessive. Hey, beautiful, never fell in

. But all of the swipe is the

luck of his vertex. I'm looking for more than rice. Okay, how much do you borrow? You're so jealous of the seller when you put it up for sale.

I have to share with you too. It's really annoying. I think there's no way to add gas.

June sold the 800 shock absorber and cried. So tomorrow, Brother Max will change the injectors.

If you try to start it and idle, if it's OK then that's it. So when we got the rubber wheels set up, the main team tuned up.

Finished tuning, now the tuning is finished. And the rest, I'll see if I can make it in time for you.

Gong and the polishing vapor don't work. This time I want to polish. Because of the wheels, we haven't had time since we got them.

After polishing, it's still cloudy, so I'm going to work again. My brother is a cutting enthusiast who will let me go in and do the cutting.

Another sticker at the store because I wanted it. Attach the windshield to the front windshield so it will touch your consciousness.

I didn't paste it and then I left work. But if I scrubbed it. If you don't have time to do anything, we'll talk about it later.

It should be in time. There should be one day and it will be worth using. What kind of mileage does this car have? You lift things often, it's worth it.

For an executive's car, why don't you just buy a computer?

It's a new day and I'm working on the car today. I'll get the steering wheel. Chai Suthirak, give it to Momo

. [Song]

Oh, let's go see Brother Tong today. We should run all day. Now that I've finished installing the tires, I'll go look for Max as well.

Maybe we can tune in tonight. We'll get it. Let's put it down first. Take this shock back or you'll complain.

Tech and here are the bf tires. Here we come. This one is

Tinky's real car. There is a real car. I'm fooling you into doing something again and I don't know. Is it Gear,

P'O? Gear, all you do every day is shoot cars, Tinky. We just...

I saw this one of yours. Look at the pipes. All the new ones are here now. Piki has an O-

School style. Khun Piki has a simple style and puts on Naz Gt2 wheels

. It looks like it fits just as well. There's no bulge. It's only

17. Let's see the one. This one originally had a tongue.

Now we're coming to Yai Laap Rama 5, coming to see P'Tong and let P'Tong handle the switch.

The tires are the same and the shocks are returned to you. Tinky, I've returned it. I left it for Brother Tong.

And, oh, I'm really jealous of you, Tinky. We brought the choke back and we'll take it soon.

We took the old shock back and had it fixed. We are ready. We will arrange it soon.

Letting Max put it on today and style it. Let's go to the garage. If anyone happens to be on the Rama 5 line,

you can stop by to see the shop. P'Tong has a story. The center is definitely set, what kind of training do we have?

Maybe we'll set up a center near Max's garage? If not, then I'll come and have Brother Tong look at it.

Again, in the future, we'll talk about it for you. Dong changes the tires first because we will

Anyway, I have to leave on Sunday. BF Grit is the big sponsor

of the Under up event as well, but we didn't go to park at the Under up booth. We went to park at the booth.

It's our own, but we just use bf grit tires. Some people might like 8 tires, but with the

8 tires that we're wearing, it's just as good. The tires are also a year old and another thing is that when they are fat.

A lot of it didn't fit as well as we wanted it to. No, it just pushes a little more in front of it.

It will break and then when you put on the fat rubber it will become known. It felt like the wheels were small, so I settled for a fuselage type that pulls the tires well.

Since we bought the wheels, we still haven't had a plan for polishing them, so

I'm hoping that if we finish them quickly this time, we'll send them. The car went to Chao Yoi and AA for polishing and cutting.

Wait a bit, we can actually use our hands. That's right, but it can't compete with the machine.

Yes, it won't be completely shiny. I don't think it will change color. We'll use this color right now.

Rearrange the style, but if we want shiny wheels or wheels Whatever it is, let's talk about it in the future, maybe we'll find a new style of wheel.

Let's put it on and play, switch and play with something like this. If you sell it, it will be in the original color too.

You won't lose your wheels because of this color. It would be difficult to do it back and before putting it on the elder who put it on

Asked how much air should the lug tires be filled with? It should be about 40. Some customers say they fill 50,

so I'm afraid that maybe if these tires are inflated, As soon as it's soft, it'll slip off the edge.

I normally pull it and see that it's 4, 40, 45, what? It's like I'm in the middle, 42. I'm asking for half.

Oh, this one is a rim cut for a Benz. Yes, Ben, but I didn't make the appointment, so I left it to you.

I'm pulling and pulling a lot, this is pulling a lot, right? This is the front wheel, not a crate wheel.

It's more like how much air does Nilpi add? I think it's probably around 40 or 45. It's

more than 40, right? Yes, it's all gone. I'm using only 235 225 359. P'Aon is

225 225 [ __ ] It's really cool. It's very easy to spin. I have to send a lot of new ones. [ __ ]

Pull it out, oh, but this one isn't a mag. How can it be turned off? The edge of the edge will get hit.

This was the first time I didn't get banned near the footpath. So, like this, I'm going to pull it out today.

My face width is 10, I wear 2 35 40, ah 2 35 40

8, I'm going to wear 35 right now, the BF stuff hasn't arrived yet, and I'm afraid I'm too short, so I took

the 40 series. Go ahead and try styling it first. I'll see what 2 35 and 10 look like, but that one,

2 25, that one is rotten. You'll probably have to look at it. The width is close to us, maybe 9 and a half or 10. Hey, I

haven't added air yet, but like BF, this one already has the feel of a fat tire.

So it doesn't feel like it's pulling too much or just the right amount. I pulled it like oh wow but it was still fat.

It's probably still difficult to organize. It's not different from the old one at all.

I think you can tilt it in a little bit. Okay, now I can arrange it. Can I arrange it?

At first I was afraid that it would pull too much, right? Now there is a feeling that it is no different than before.

Just go in a little and it's difficult to get in front. Wow, but it's already been set. This one is still enough.

Tilt away a bit. This one sticks out a lot. This one. It's going to be set up like this and it's going to tilt away a little bit.

You have to look at this side. This one has to be reversed. I'll see clearly. This guy is hiding.

This one is perfect, but this one will be Tilt it away a bit to keep the color in the beginning.

I think it will pull away but since it is also a 40 series, if it were a 35 series

it would be thinner, a 40 would be a bit fat. Still giving a similar feeling but pulling in

Give it a bit of a rounded feel. It might be a little easier to arrange the print, but

Didn't pull the tire until at first I thought we thought it was worth it. I'll pull it until it's too big, but no, 2 35

40 is just right, but this is also a 10 10 series.

It should still be drivable. If it's a 35, the car will be lower, right? As soon as it's lower.

When we come again, we have to push down again, which makes the car difficult to drive. This piece of software is at 380. I don't think so.

It's going to be this fat but 225. If it's 2 25, it will pull until it's stretched beyond this point.

Once it's like this, we'll put it together in front of each other. first and wait to see the latter pair to see if it is

Anyway, but overall this is a rubber track. This bf grit gforce vom is

about cheeks and bits, I like it already. It's beautiful, but we'll try it out slowly.

This fitment thing will be perfect until it's perfect. It's a headache too because Each brand of rubber melts differently.

Even if it were the same size, it would Let's find out again when we come to put it in next.

I'm looking forward to the rear wheel. My rear wheel is 11 wide and I'm going to use 245. If I don't, it will explode. There are 2

things. If you look at it from the side, it looks OK. It should still be enough. Let's go together and it's going crazy.

I don't want it to pull, because it's going to hurt. The wheels sometimes pull a lot and when driving they come across wheel holes.

It will be loud and sometimes the tires will fall off and the tires will rot. I'm afraid that this one might be difficult to organize.

A little, but we don't have to go so far as to suck it to the brim. This is it. I think it's really just a tap.

The book is good enough, but it's still brutal. Just take one. This line is probably enough, so let's add a little bit of this.

Stay with Hu Kuarai on the rear wheel. I'll try it and see

how it pulls after taking issue.

Now he has the same size as well, which is only 245, but at first it was

265 after the pull, behind the pull.

There's more on one side than on the other, and there's a lot more pulling. So it turned out that the back was pulled more than the front.

I did it to play with a bazooka in the jungle, so I

watched a bazooka for the first time. I once set up a car and had to shoot a bazooka before going to the side.

Oh, but once I add air it's pretty good. She's beautiful and still looks fat. She did it to play with a rubber bikini.

It looks fat and rubbery. Do I have to be fat or does my face have to be 225

or what's causing the problem behind me? Yes, with the 40 series as well.

It's considered to have a lot of pull too, but when it's a Series 40, it makes you look fat and thick. If it's a

Series 40, I think you can put 225 in the front. You don't even have to shoot a bazooka in front.

There's still plenty left, which is exactly what's arranged. It's hard to talk to P'Mag, it's in front of me.

Yes, the back is really behind us, just the thing. It's old, we went from Map it -B 5, we take

-3 and it will fit in the arch. But I think that if you pull it, it looks beautiful and it's enough to pull the rubber.

A little bit makes the wheels look bigger. We may calculate Wrong. The difficulty is that each brand of tire doesn't

It's the same, it's fat. Just now P'Som also said, well, this bf tire has beautiful flowers and a nice pattern, right?

But for the size, we have to say it must be. Calculating is a headache. I just went to Honda. It's adjustable.

If not, then let's go find the height. New

[song]

[song] The back is neat, the back is beautiful, the back is beautiful, the face.

Not yet, let Pee Max look at it. Yes, my face is tight, that is, with emotion.

The tires are very tight. Now the van is tight, very tight. Hem, I'll have to try it out and see if it's as difficult to arrange.

Originally, May stopped to eat and then changed. Completely done, thank you

P'Tongyai laab, Pram 5, if anyone wants to come change the wheels, change the tires, adjust the alignment.

Yes, you can come to Yai Laab Rama 5 at this shop. Excellent service, right on the roadside at first.

We will come to Brother Tong to arrange it, but in the end It's better to let Pee Max arrange it for us.

Let's arrange something and then we'll go tune it. Let's try to see if the rubber is rounded.

However, in the future we have a feeling that it is not yet There's not enough traction but overall it's the tread.

The rubber pattern is very beautiful. It looks fat. It looks like it has. It's good, but it has good qualities and it pulls more than before.

Still got into the concept in the first episode where we were like, well, I still want to be fiel mey, but let it pull.

A little bit, but I'll try it and see if it still pulls. If that's not enough, let's talk about it. In the future, let's try to arrange

this position. Let's go Under up first. As for [the song],

is this side right? But there are people who say Beautiful, beautiful tires. Hey, you have to come. I'll give this one to the kids.

Send the rear tail to Masterpiece because it pulls. Oh, I'm so upset, oh my gosh, don't be afraid, don't go.

I'm afraid too. I'll help you this time. Whether you want to sell tires or not, decide first.

I'll buy it and then I'll ask you to buy it. It's expensive. Go ahead. Go ahead, OK, this job has been a big deal.

Bought the blue interior and just gave it away. It's even faster to stay here.

For the cutting, we gave it to Momo because it's itchy. I changed the steering wheel so I brought a mill for us to put in.

I've arrived at the office. P'Mag said it was good. It's older than it is. It's falling down a lot more than before.

Try putting it on first, the back should fit just right. Wait and look ahead. You have to put the shock in front first.

Please slowly make the Max and put it in the injector in the morning. It's finished. There's only fitting left. You should probably put it on and

adjust it. If you look at it from the boom, it's already come through.

But this one is much more dodgy than before. At first it was Set it up and it's almost stuck to the arch.

It should be OK. I'll adjust the map a bit more. Wait for him to put on the shock first and then look ahead.

Let's talk about what needs to be supplemented. The back should adjust the map plus fight, it should be pressed low.

Got more than before and when it ducked down we were naughty and saw it. The wheel of the mag inside.

I want to try it. It's 12 wide. It's really deep.

How much is it? The mag isn't only 12 wide, so it's

13, isn't it? It's really deep. This one is 265 35 18. This is the size. Wear 265. This is 35.

Wear 35. Wear 265. 3518 2 things are hot. This one is clear and shouldn't be there. We open it.

Before it bulged, it probably couldn't be removed.

Yes, 7k. Hey, that's okay. Why did you pull it in and subtract it a little bit? No, sir, this one is like this.

Mommy's frog. Oh, my cam. Wow, are we big yet? Has it overflowed like this? It's really deep.

If you're stuck with this one, you have to split up and fight alone. P'Kaew Maew

suddenly ran away from the dog and hid there. The dog [ __ ] ran past and couldn't see. It was full enough. I'll be

able to run. I'll have to fight like this. I'll try putting it on first and then I'll take the car down.

I'll see if I have to try some spacer plates. How much is something like this but it's more pulling than before?

A lot, if you look at first it doesn't seem like it's going to come. All right. Brother Max should let him adjust it.

Baber comes and adds a little more today and then Let's look again at pushing it out and adjusting it one at a time.

A little bit, but the tires are pulling. Look, this time look at the big wheels. Starting to see the wheels.

[Song]

Wow, it's gotten a lot lighter.

The sound was still loud, but Junie hadn't pushed it yet. It's the face, but the face has become more beautiful than before.

So it looks like the wheels are bigger. He could see his front wheel behind him and his front wheel was out.

Let's put it on in front of the doorbell and lean on the wheel first. In addition to the machine's hand, the hand is also a piping hand.

Now behind us we push out. Push it out. If it's straight, we push it out.

The front is plus and the back is subtracting a lot. [ __ ] I'm talking in my throat.

Hey, Yo Toon, why do you remember the punches? Toon, you went to the hut.

This one we're looking at is the back of the battle but the front. It's very positive, so it's strange that His Majesty started coming here.

Just pull the tire and the car's mood changes. Pee Max is waiting. In front, 12 mm., the wheel is starting to come out.

You'll start to see the wheels. You should probably adjust the back. Just a little more, let it have a little more positive camber.

One is down, hey ho, when it's pushed out, it starts to have a shape. [Song]

Wow, it's starting to come.

[Song]

Style

, this side is here, fingers can't get in. So maybe adjust it to be a little bit more positive, this one next.

He said enough is enough and it's beautiful, but enough paste is bad enough. Driving can be done without putting on the tires, not wanting to suck too much.

Otherwise, it'll be a little difficult to drive, right? Then distribute it to customers. When customers come, I distribute it all.

The second one was full. It was about the right amount. This one can be ok and it won't stick but just blow it.

Well, Phi Max still doesn't let me push him, so let me adjust it. Positive camber first, then later.

Support P'Max, tell him it's bulging, we're tilting it and pinching it. Is it the rubber? Otherwise it would be very crowded.

More than this, if you can't find the car, it's not accurate. If it's If it comes out straight, it's very shiny.

Yes, the pong will be able to avoid the medicine again, right? Will it come out again? Oh, it's tilted and pinching the tire.

If it comes out here straight, if it's straight So it's going to be loud here. You should probably get 2-3

bills and it'll look beautiful. Oh, if the pong comes at this point. It will come and take control. It will bite into the rubber. It won't matter.

We pong gradually fix it, gradually change it [song]

from the back, now it's left to arrange the back and front. It seemed like he was going to be okay, but Max said

Our Pong is this part, it's not a part. It's true that the cheeks from where they have to grow are oily like

It's cocked down. When it's cocked down, it really pecks at the rubber. It flares down straight down so it won't pinch the tire.

It can be opened and this one can be pecked in. If there's a chance the tire will break, it'll happen later.

Let's wait and see again before it might be difficult. It's about this high. Just put on the rubber and that's it.

That if I'm short and I suck it again, I won't be able to drive. Got this one, we just took the model to tease it and look at it.

Looks a bit big at first, when it closes it makes The wheels look small and when you put a thick layer of caulk on them, you'll have to patch them up.

I'm not really into racing, but I like it. This is so lacking. You look so beautiful.

You can add bass.

My heart is still strong. Keep pushing. I

'll try as much as [song]

. No matter how long it takes, I won't reach it. Oh wow, I haven't reached this side yet. It looks taller but in the end it's enough if you actually measure it.

Max said that it's like this side of the bulge is 2 cm shorter than this. 2 cm. This side of the bulge is short.

Than it looks short, right? Yes, it will be. I can't take this course. It's not as good.

Its protection is adjustable and can be divided further. Ahh, I'll just change the long nut and try it.

Planned it and then it can be moved in again. What can I do with the back? Ye's side can get it but not the me's side.

You can only drive one behind Uden, so you don't have to drive at all. Ah, now it looks like my face needs to be pushed out a bit.

One and then spread a little bit like it's adding too much. A little bit, but now the problem is that the rear wheel is bulging.

It's not even. It's like this side is short on this side. Up there, this side is fine and beautiful. How is it starting to look?

About this time, it's good for the next one. If it happens We will change and wait. This one should look good and wait.

Set it like the front is 10, the back is 11, what? Is it like the front or the back of 12? But it's not.

Yes, I deleted a lot like that one from P'Phi Max's s1. It's really too much minus. It's like this, about minus a little

-5 -10. Actually, I think it's like the Japanese ones. It's good, 10, 11 and a half, something like that.

Hey, now everything looks fine. Can't make a turn but is stuck on the man's side.

Sitting in the back is only one side high. It's strange. I'll try looking again and maybe press down.

Come a little more and there's only one left. The left and right front and back are all beautiful and close.

And then a little more, a little more, and you won't let it pass. Yes, you have to be beautiful first before you're strong. This time, bring 300. That's

enough if you're short enough. It's already hooked up and I can ride it. 4500 should be able

to use the mag to get the one that's attached to the A car. I'll try the black one first because it didn't work at first.

There won't be any overflowing here. This isn't Ye Mene. It's easy, take it up, take it down and make adjustments.

It took from this afternoon until now 4:00 p.m. Today may still be good or bad. We haven't tuned in yet.

Shift into gear because you'll have to set the center first if If you don't set the center, it will be on the dyno soon enough.

I'm going to go crazy all over here, isn't it? There's still a lot of porto left, right, left to paint.

They all belong to Pedro Kos. Nai Nai Nai Phra Brak

Oh wait, I don't have your car. I just got a new car. How many did they go ahead and get?

How many times did you drive from Chiang Mai and come to the garage? I'm here at Loei Lue Garage.

My [song]

Loei just got an S15 with R spec from Chiang Mai and drove back with me, but it's like

The suspension wasn't good so I brought it to Brother Max to dismantle it and send it. Go get everything powder coated and re-plated.

The details are that we haven't driven it yet. Yes, Brother Waid, that is, I just drove from Chiang Mai.

I came to Bangkok just now and he said that he wanted to The fuel arrangement is similar to our car's, with the same low profile as the car.

You're so neat and precise, I just now know. Na, Ikanchan, minerals are very expensive. At first I thought I liked them.

But the price makes me feel like I'm going to buy it. Genuine Japanese parts all around the car. We probably come with the style.

A pong like this is better because we like to tease deeply. The mag catches all the long nut changes.

Both front and back in order to arrange it. It will be easy to add anything now that the tuning person is here.

And Pee Max said to add 13 mm. Try looking at the bulge. It doesn't work. The same thing is like adding 8 mm to the right side,

13 mm to the left side. Try to see it before you open it. It has come and you have to. Look at that side before entering.

I'm still a bit in-law. I have to move around a bit. Please shake it a little. Mom said, let me shake this.

You got the back, you got the front, you got the back.

Hey, I got it. Can I take it out again on this side? Will it come out again? This side is about 4

millimeters apart. What do you say? Hey, I got it. It's puffy. Let's go out a little bit here and there. It's coming out. It's like this.

It's okay. It's round. That one is bulging. It's beyond our control. I'll ask you to tighten it.

The rope is set to the center first, like tuning. First of all, when I go to fasten it, I have to go take off the wheels.

Also

, [the song] is so uneven on the ground behind it.

Please come, but just now P'Mack said that my face was stuck a little. But this one, oh, my face is really pushing me, Max.

That a page like this is okay, Pee Pee, if we delete it More than this, it will break.

It's different. If you delete too much, it will happen. It's difficult to ride, this is already posted.

I can't fit it in at all. Is it a temple or do I have to choose? Good province. Hey, I'm stubborn. I can only get it later.

His back looks like he's still standing but he'll be afraid soon. Press too much and it won't be able to be tightened when it's on the dyno.

I'll just set it to the center first and then go up. Dino and then set it down a little more. If you look at it from this angle,

it's considered open. If it's behind the front, it's considered open.

It's about the right height and is about this short. It should be possible to get a Juicy in front of me. Will I get hit or not?

Oh, I passed Chill just now and when I saw it from afar I was driving.

It's very open. We look at it with our eyes like Not really.

I'm still here, but I think I got it just now. It's not stuck either. I'll clear it up first.

It can be driven on the dyno because the head can be changed. After spraying it, it's all distorted. Brother Jik will kick it.

When finished, go tomorrow to set up the center. When it's finished, it should probably be tuned in at night.

We went to see Doo June. The first time we didn't get to see it, we were shocked. It's like it's youring a little bit and here it is.

It's like he's bent over and grabbed this guy, so he does. It's hard to arrange right now. Just paste it. It's

a little cracked. One of the fittings gives me a headache and I hit it on my cheek.

It's like it's sagging. Can you really see that the line is there? This must be a line, it must be a continuous line.

Well, it's starting to get incoherent.

And now that the back is looking good, the front will see if we can take it. I'll take it out and it will come out positive.

A little or what should I do? But I didn't plan on raising it higher,

but now it's pasted. I'll see. Do you want to remove it again or do you remove it and pull it?

Let's add it up and let Pee Max look at it again. I'll have Brother Jig kick it again before he walks.

It's difficult to walk smoothly. Prepare to write. We changed the

injection head

. It also has a silencer. This will not fall on the ears of the villagers.

I'm still harvesting. The oil is still thick. It's a little

small. Can't wait to shake it at first. Sitting up and down. I want it.

It's still. It's not still. At first it was shaking. [Song]

P'Pack said it's a little cute when walking. Really, S It's not a rattling machine. You have to walk.

Let's walk like a house car. Let's walk like a car. Just let it be loud for one. Enough for this one, let it be quiet.

How is it? Gua Hai Lung Hydraulic is quiet. Like this, it's really fun to drive.

Oh, it was just a moment ago, or the crystal ball was gone. Nia is suspicious that Ohm has entered and is shocked.

I'll let Ohm look at the first episode. We changed Orlam's crystal ball and took it down.

Go to Olam's channel. I'll see if I can get Aom. Change it in this one too, maybe I'll give it a try.

Oh my, when I really look at it, it looks like there's something wrong with it.

Now that I'm finished with it, I'm going to try adding oil,

but I still can't fix the flutter because the cam is oily. It's so high it's slowly starting, slowly starting.

Just walking like this, OK, it's loud like this. OK, not too loud.

I can go, I'm here, I'm

growing,

Oh, but I'm a star.

[Song] [Laughter]

[Song]

It's easy, but it's a lot better. Oo has completely changed his style.

Oh, this sound is coming on.

Okay, this is coming.

Okay, but if you look at the running, I think it's behind you. It's already beautiful.

[Song] So oh wow, it fits right in front of the tongue, but it

doesn't get hit.

Because just now the handbrake stuck, so Max fixed it. The handbrake is a little tricky, but overall it's workable.

Just now I'm pregnant and I'm not pregnant at all. I look at my fitness. I think it's ok. It seems like there's still a slight glitch.

It's a bit of a baby bump, but overall it's okay. Yes, I told you, Odd Mae has to come in now.

Are you going to sleep? Why doesn't the school work? Why does it make you lose your mind?

Oh, calm down, calm down, you're already mad at the lens factory. You can report these types of things, but you can't play in the lane.

No, that's okay. I'll just cover my eyebrows. The eyebrows are better closed than the eyebrows that are there.

The eyebrows puffed up and the tusks came out, brushed out the tusks. Let it shine and then change the glass crystal.

Take out the tusks of P'Max and P'Jik and get them on the tree. The road is ready and everything is OK.

It's like you want the model to walk quietly without I used to walk and pant, but now I pant with my cam, cam lift.

It's taller, the lift is higher than what you guys are trying to put on. Adjust it to make it as smooth as possible, depending on the sound.

Be quiet or you'll let us go test drive gently. Let's see if you can drive it first. I don't like it. There's still some stuck in the front. I

rubbed it a little bit and rubbed the tire again and the tire was full.

This thing is so full it can't magnetize this thing. I saw it curve down and peck at the tire and it wouldn't open up.

Mac Rao Buu itself has the cable deleted a bit more. Yes

.

_ Isn't it great? The two sides are not connected to each other.

Attached to this side only. I'll post it for you and then I'll find something. Don't worry, don't worry.

[

Song] The 2 cars are not the same, so try driving them.

Before, I was looking for a low one but felt like I wouldn't get stuck on anything

[music]

so it was a lot easier than before but with 1 1 it would stumble like a camber of the camera. 3 is

tall but the sound is ok [ Song]

You've got a car behind you, watch out for motorcycles. Pejo is easier to drive than before.

There's a lot of cold air passing through the house and the shop at the mag. It's OK to walk here.

There are a lot of hills. There aren't any angles to move around with. Talk a little

bit. [The song]

might stumble a little at the beginning, but the rest. The drive is ok, a

lot better than when we drove there

. The air conditioning is cool and there's a little bit of noise.

That is

, if the road is clear and there's no traffic jams, chill, chill. But the engine at the end is very slow.

What Max said is that it's just as bad as before. But at first the pipe was louder than this, right?

The rear is a little sluggish, but if you drive like a car, It's not addictive, it's chill at all.

Okay, maybe there's a little bit of a problem when the rpm is low, 1st gear is a bit difficult to ride.

[

Song]

Okay

[Song]