How to make Custom Holographic Trading Cards using Cricut Explore 3

Maximum Attack Drift Team
5 Feb 202210:15

Summary

TLDRThis tutorial guides viewers through creating custom holographic trading cards using accessible materials like glossy cardstock and transparent vinyl. It details the printing process using a regular home printer, the importance of laminating the cards with cold lamination to protect layers, and offers tips for setting up a cutting machine for thick materials. The video emphasizes adapting techniques based on available resources, making it ideal for DIY enthusiasts, especially those in regions with limited access to specialized supplies.

Takeaways

  • 😀 Use glossy 300 GSM backing card for high-quality trading cards.
  • 😀 Transparent printable vinyl can be used as a substitute for holographic vinyl when it's unavailable.
  • 😀 A regular home printer can successfully print on holographic vinyl; high-quality settings are important.
  • 😀 Ensure to trim excess materials before printing to avoid printer jams.
  • 😀 Cold lamination is recommended for vinyl to prevent damage from heat.
  • 😀 Create a custom material profile in Cricut for cutting thicker laminated cards.
  • 😀 Monitor the card during the cutting process to prevent it from popping up and causing misalignment.
  • 😀 Adjust the printer settings for accurate scaling; always set to 100%.
  • 😀 Use matte tape to secure the card to the cutting mat for better scanning.
  • 😀 If available, using printable holographic vinyl can simplify the process.

Q & A

  • What materials are needed to make the custom holographic trading cards?

    -You will need glossy 300 gsm backing card, transparent vinyl, and printable holographic vinyl. A regular cardstock can also be used, but the glossy backing is recommended for quality.

  • What type of printer is recommended for printing the cards?

    -The tutorial demonstrates using a Canon all-in-one home printer, which is more accessible than a high-end pigment printer.

  • Why is it suggested to use cold lamination for the cards?

    -Cold lamination is recommended because heat can damage the vinyl, which is not heat-resistant and may cause the laminate to peel off.

  • How do you ensure the printer settings are correct before printing?

    -You need to set the printer paper size to A4, select glossy paper, ensure high print quality, and adjust the scaling to 100% in the printer preferences.

  • What challenges might arise with the Cricut cutting process?

    -The Cricut may have trouble scanning the bottom right corner of the design, so using matte tape to secure that area is suggested. Additionally, the thickness of the laminated card requires custom cut settings.

  • What is the recommended cut pressure setting for the laminated cards?

    -The recommended cut pressure setting is 340 times three with a deep point blade, tailored for the thickness of the laminated trading cards.

  • Why is it not advisable to use printable vinyl for stickers?

    -The transparent vinyl is not waterproof, making it unsuitable for stickers that need to withstand moisture.

  • What does the creator use to create the card designs?

    -The designs for the cards are made in Procreate and then imported into Canva for layout before sending them to the printer.

  • What should be done after printing the cards?

    -After printing, the excess material should be trimmed off to avoid jamming the printer, and the cards should be laminated before cutting.

  • What is the alternative suggested for those who cannot find printable holographic vinyl?

    -For those in locations like New Zealand where printable holographic vinyl is hard to find, the tutorial provides a workaround using transparent vinyl and holographic backing.

Outlines

plate

Esta sección está disponible solo para usuarios con suscripción. Por favor, mejora tu plan para acceder a esta parte.

Mejorar ahora

Mindmap

plate

Esta sección está disponible solo para usuarios con suscripción. Por favor, mejora tu plan para acceder a esta parte.

Mejorar ahora

Keywords

plate

Esta sección está disponible solo para usuarios con suscripción. Por favor, mejora tu plan para acceder a esta parte.

Mejorar ahora

Highlights

plate

Esta sección está disponible solo para usuarios con suscripción. Por favor, mejora tu plan para acceder a esta parte.

Mejorar ahora

Transcripts

plate

Esta sección está disponible solo para usuarios con suscripción. Por favor, mejora tu plan para acceder a esta parte.

Mejorar ahora
Rate This

5.0 / 5 (0 votes)

Etiquetas Relacionadas
DIY TutorialHolographic CardsCraftingTrading CardsCard MakingPrintable VinylCraft SuppliesHome PrinterLaminationCricut Projects
¿Necesitas un resumen en inglés?