How To Turn Siren Chirps On & Off, Compustar Alarm CM7000

Summary

This tutorial video guides viewers on how to enable or disable siren confirmation chirps on a Compustar alarm system using a two-way remote control. The presenter demonstrates the process of toggling the chirps on and off by pressing the lock and unlock buttons simultaneously. If the feature is disabled, the video provides a step-by-step programming guide to enable it through the system's menu. The presenter also advises viewers to consult a professional installer if they encounter any issues, ensuring a comprehensive guide for both DIY enthusiasts and those seeking professional assistance.

Takeaways

• 🚗 The video is a tutorial on how to control siren confirmation chirps on a Compustar alarm system using a two-way remote control.
• 🔒 To turn off the chirps, press the lock and unlock button together on the remote control.
• 🔓 To turn the chirps back on, repeat the action of pressing the lock and unlock buttons together.
• 🔕 If the alarm is triggered, the siren will still sound even if the chirps are turned off.
• 📦 Not all Compustar alarm systems have this feature enabled by default, especially newer models.
• 🛠️ If the feature is disabled, an error will occur when trying to change the chirp settings.
• 🔧 The video provides a step-by-step guide on how to enable the feature if it's not available out of the box.
• 🔢 The feature is accessed through programming menu number one, specifically option number 16.
• 💡 To enter menu 1, press the lock and unlock buttons together for 3 seconds, twice in a row.
• 📈 After selecting option 16, wait for the alarm to beep and flash 16 times to confirm the change.
• 👍 The video encourages viewers to like and subscribe for more content.

Q & A

What is the main topic of the video?

The video demonstrates how to enable and disable siren confirmation chirps using a two-way remote control on a Compustar alarm system.

Is the process shown in the video applicable to all two-way remotes?

The process should work on all two-way remotes, but some programming may be necessary depending on the system.

What should be ensured before starting the process described in the video?

Before starting, all doors should be closed, and the engine should be turned off.

How does one turn off the siren confirmation chirps as shown in the video?

To turn off the chirps, press the lock and unlock buttons together, placing a finger over each button and tapping them simultaneously.

What happens if the alarm is triggered after turning off the siren confirmation chirps?

If the alarm is triggered, the siren will still sound, but without the confirmation chirps.

How can the siren confirmation chirps be turned back on after they have been turned off?

To turn the chirps back on, perform the same action of tapping the lock and unlock buttons together.

What does the video suggest if the option to enable or disable chirps is not available out of the box?

If the option is not available, it may be disabled by default and needs to be enabled through the programming menu.

Which programming menu and option number should be accessed to enable the siren confirmation chirps feature?

The feature is found in programming menu number one, under option number 16.

What is the procedure to enter programming menu number one for Compustar alarm systems?

To enter menu 1, press the lock and unlock buttons together for 3 seconds, and repeat this action twice in a row.

How does the alarm system confirm that the option to enable siren confirmation chirps has been successfully set?

The alarm system confirms the setting by beeping and flashing a corresponding number of times, in this case, 16 times for option 16.

What should be done if one wants to revert the siren confirmation chirps setting back to disabled?

To revert the setting, follow the same procedure to enter the programming menu and tap the lock button instead of unlock at the end.