Cortrium C3+ Holter Monitor Patient Guide

Summary

This video provides a comprehensive guide on how to use the C3 Plus Halter Monitor, from skin preparation to starting and managing recordings. It covers electrode placement, device attachment, and how to ensure a proper connection. The video also explains how to monitor symptoms, mark events using the device, and handle the device during activities like showering. It emphasizes the importance of consistent device wear for optimal results and how to manage the device’s flashing indicators. The guide concludes with instructions for contacting customer support if further assistance is needed.

Takeaways

• 😀 Ensure proper skin preparation by shaving hair and cleaning the area with alcohol before placing the electrodes.
• 😀 Attach the electrodes securely to the device connectors and ensure proper adhesion to the skin for accurate readings.
• 😀 Start the recording by pressing the button on the device. The green light should initially flash fast, then turn to a slow, constant pulse.
• 😀 Keep the device on at all times during the recording, except when exposed to running water (e.g., during a shower).
• 😀 If the device flashes white, it indicates a loss of contact with the body. Reattach the device to restore the connection.
• 😀 The device should remain in proper contact with the skin to ensure accurate data collection.
• 😀 Use the logbook to track any symptoms or discomfort during the monitoring period. Press the button to mark an event if needed.
• 😀 To end the recording, press and hold the button for 3 seconds before removing the device.
• 😀 Make sure the adhesive sticks firmly to the skin and there’s no air between the electrodes and the skin for optimal performance.
• 😀 For any issues or questions, contact customer support via phone, chat, or email, available at the support section of the website.

Q & A

How should the skin be prepared before attaching the C3 plus halter monitor?

The skin should be shaved in the area where the electrodes will be placed to ensure proper attachment. Hair may prevent the electrodes from sticking well to the skin.

What should be used to clean the skin before applying the electrodes?

The skin should be cleaned with a cotton swab and appropriate alcohol to ensure it is free from oils or dirt that could affect the electrode adhesion.

Where should the C3 plus halter monitor be placed on the body?

The device should be placed vertically along the mid sternal line on the chest.

What is the correct way to attach the electrodes to the device?

Carefully remove the plastic from the adhesive surface of the electrodes and attach them to the electrode connectors on the device. Ensure the adhesive sticks properly to the skin with no air gaps.

How can you verify that the electrodes are sticking properly to the skin?

You should apply light pressure to all the electrodes individually to ensure they are sticking firmly to the skin.

What should you do after pressing the button to start the recording?

After pressing the button to start recording, the green light on the device may flash rapidly at first, but it will turn to a steady, slow pattern, indicating that the device is recording.

When should the device be removed from the body?

The device should be removed when exposed to running water, such as when showering. However, the electrodes should remain attached, and the device should be carefully separated from them.

What does it mean if the device flashes white?

A white flash indicates that the device has lost proper contact with the body or electrodes. It is important to reattach the device to ensure it is properly connected.

What should you do if you experience discomfort or pain during the recording?

If discomfort or pain occurs, you should press the button once to mark an event. This will help with analyzing the recordings later.

How can you track symptoms during the monitoring period?

You can use the logbook to track any symptoms experienced while using the device. The logbook can be downloaded from the company's website under the support section.