Mesin CNC BUBUT GSK 928 TeA

Summary

This instructional video provides a step-by-step guide on how to operate a CNC lathe machine. It covers essential procedures such as turning on the machine, loading and verifying programs, setting zero points for the workpiece, measuring the diameter, executing the program, and safely shutting down the machine. Key actions include checking the workpiece's secure placement, ensuring the machine is properly set up, and adhering to safety protocols during operation. The video concludes with machine cleaning and proper shutdown procedures to ensure safe and efficient use.

Takeaways

• 😀 Ensure the CNC lathe machine is powered on by following the steps to activate the main switch and power system.
• 😀 The reset button must be pressed at the beginning to prepare the system for use.
• 😀 Properly install the workpiece onto the chuck, making sure it is securely held.
• 😀 Load the previously saved program by pressing the appropriate buttons and entering the correct program number.
• 😀 Set the zero position on the workpiece to ensure accurate machining results.
• 😀 Measure the diameter of the workpiece after machining and input the value into the system.
• 😀 Execute the program by ensuring the machine door is closed and pressing the necessary buttons for auto and cycle start.
• 😀 Do not leave the machine unattended while it is running the program to ensure safety.
• 😀 Once the program is complete, remove the workpiece and turn off the machine.
• 😀 Clean the machine thoroughly after use and ensure the power is turned off properly to avoid any hazards.
• 😀 Follow all safety procedures, including using the emergency stop and turning off all power systems after completing the task.

Q & A

What is the first step in operating the CNC lathe machine?

The first step is to turn on the main power switch of the machine.

Where is the power switch located on the CNC lathe?

The power switch is located at the back of the machine.

What should you do after turning on the power switch?

After turning on the power switch, you should press the reset button to initialize the system.

How do you secure the workpiece to the CNC lathe?

The workpiece should be securely clamped in the chuck, ensuring it is tightly held in place.

How do you recall a previously input program on the CNC lathe?

To recall a previously input program, press the 'edit' button, then the 'input' button, and enter the program number. Press 'enter' to confirm.

What should you do if the program displayed is correct?

If the program is correct, press the 'Jog' button and rotate the spindle counterclockwise to check the setup.

How do you set the zero point on the workpiece?

To set the zero point, press the appropriate button to set the value to zero, then press 'enter' twice. The Z-axis value will update accordingly.

What is the process for measuring the diameter of the workpiece?

After machining, measure the diameter of the workpiece, record the measurement, and input the value into the system by pressing 'I' and entering the recorded diameter.

What should you ensure before executing the CNC program?

Before executing the program, ensure that the machine door is closed and all settings are correct.

What should you do after the program has finished running?

After the program finishes, remove the workpiece and clean the machine. Also, make sure to shut down the machine by pressing the emergency stop button and turning off the power switches.