Beta FPV Nano V2 With Pavo 20 (review and test)
Summary
TLDR在这个视频中,主播展示了如何通过安装Beta FPV Nano V2模块,使没有内置ELRS的遥控器能够支持ELRS功能。他详细介绍了安装过程,包括如何在遥控器上激活模块,并配置无人机(如Pavo 20)以适应新的遥控系统。通过实际操作,他向观众展示了ELRS系统带来的方便与效率,比如快速绑定和改善的飞行距离。视频中还包含了一些飞行测试,展示了无人机在各种模式下的表现,尤其是在有风的情况下。整个视频不仅提供了技术指导,还展示了通过一个小改动如何显著提升遥控飞行体验。
Takeaways
- 📡 介绍了Beta FPV Nano V2,一个可以为没有ELRS(Express Link Remote System)的遥控器增加ELRS功能的模块。
- 🔌 该模块有1千瓦和2千瓦两种型号,2千瓦型号提供更远的传输范围。
- 🔄 通过将模块安装在遥控器背面,即使是没有ELRS的Radio Master遥控器也能实现ELRS功能。
- 🔋 模块需要充电,一旦连接到遥控器,它就会启动并为遥控器提供ELRS功能。
- 📺 展示了如何实时将模块连接到遥控器,并在菜单中选择Express LRS进行设置。
- 🛠️ 为了使无人机与ELRS模块配合工作,需要在Data Flight中进行特定的端口和配置设置。
- 🔄 在配置方面,需要将UART 3和UART 4端口打开,并禁用自动配置。
- 📶 需要将UART 4的外围设备设置更改为VTX MSP加显示端口。
- ⚙️ 确保接收器通过串行UART连接,并且接收器提供商设置为Crossfire。
- 🔗 描述了如何将无人机与遥控器进行绑定,包括将遥控器置于绑定模式并按下无人机侧面的按钮。
- 🌬️ 尽管现场风很大,但使用ELRS模块的遥控器与无人机和护目镜的连接非常迅速。
- 🚁 飞行体验中提到,使用ELRS模块的遥控器与使用DJI遥控器2相比,连接速度更快。
- 🛤️ 飞行演示表明,Pavo无人机在风中表现稳定,即使有小碰撞也能继续飞行。
- 🔧 通过使用Nano V2模块,用户可以将任何遥控器转变为ELRS遥控器,而无需携带多个遥控器。
Q & A
Beta FPV Nano V2模块有什么特别之处?
-Beta FPV Nano V2模块是一个电子长距离系统(ELRS)模块,可以安装在没有ELRS功能的遥控器上,使其具备ELRS功能。这使得用户可以用一个遥控器来操控不同的无人机,包括微型无人机和大型高清无人机。
1千瓦和2千瓦模块的区别是什么?
-1千瓦和2千瓦模块的主要区别在于它们的通信范围。2千瓦模块比1千瓦模块提供更远的控制距离。
如何在遥控器上安装Beta FPV Nano V2模块?
-将Beta FPV Nano V2模块插入遥控器后部的相应插槽中即可。安装过程简单,不需要进行复杂的配置。
使用Beta FPV Nano V2模块后,如何在遥控器上启用ELRS功能?
-安装模块后,打开遥控器,进入菜单选择'ExpressLRS'选项,即可看到ELRS功能已经被启用。
为什么需要给Beta FPV Nano V2模块充电?
-Beta FPV Nano V2模块包含内置电池,需要充电以保证其正常工作。充电完成后,该模块可以为遥控器提供ELRS功能。
如何配置无人机以使用Beta FPV Nano V2模块?
-需要连接无人机到电脑,使用Betaflight软件配置。主要步骤包括设置UART端口,选择串行接收器选项,并确保接收器提供商设置为Crossfire。
如何将无人机与Beta FPV Nano V2模块绑定?
-在无人机和遥控器都开启的状态下,使用一个小工具按下无人机上的绑定按钮,进入绑定模式。之后遥控器和无人机会自动连接。
在飞行中如何切换不同的飞行模式?
-在遥控器上设置不同的辅助开关(AUX)来控制无人机的飞行模式,如arm模式、angle模式和horizon模式。
Beta FPV Nano V2模块的通用性如何?
-该模块非常通用,可以安装在任何没有内置ELRS的遥控器上,非常适合需要多种遥控器来操控不同无人机的飞行者。
Beta FPV Nano V2模块在风大的情况下表现如何?
-尽管测试飞行中遇到了较大的风,但使用Beta FPV Nano V2模块的无人机仍然能够稳定飞行,表明其性能在恶劣天气条件下依然可靠。
Outlines
🚁 介绍Beta FPV Nano V2 ELRS模块
本段落介绍了Beta FPV Nano V2,这是一款可以为任何遥控器增加ELRS(Express Link Remote System)功能的模块。该模块有两种功率版本:1千瓦和2千瓦,后者提供更远的传输范围。通过将模块安装在遥控器背面,即使是原本没有ELRS功能的遥控器也能实现ELRS连接。视频展示了如何将模块连接到遥控器,并在遥控器上激活ELRS功能。此外,还介绍了如何设置无人机以与ELRS模块配合使用,包括在Data Flight软件中的端口设置和接收器配置。最后,展示了通过ELRS模块连接的无人机与遥控器的绑定过程,并进行了飞行演示。
🌬️ 飞行测试Beta FPV Nano V2 ELRS模块
在第二段中,视频作者在户外进行了Beta FPV Nano V2 ELRS模块的飞行测试。作者提到,由于风力较大,飞行条件具有挑战性。尽管如此,作者还是展示了使用该模块进行飞行的过程,包括起飞、飞行控制和应对风力影响。在飞行中,无人机遇到了一些障碍,如被树叶缠住,但作者通过切换到Acro模式(特技模式)成功地恢复了控制。视频最后,作者对Beta FPV Nano V2模块进行了总结,强调了其便携性和多功能性,能够适配多种无人机,使得用户无需携带多个遥控器。
Mindmap
Keywords
💡Beta FPV Nano V2
💡ELRS模块
💡Radio Master
💡Pavo 20
💡Data Flight
💡串行通信(UART)
💡VTX MSP 显示端口
💡Crossfire 接收器
💡绑定(Bind)
💡飞行模式
💡飞行稳定性
Highlights
介绍了Beta FPV Nano V2,一款可以为遥控器提供ELRS(增强型低延迟系统)的模块。
Nano V2模块有1千瓦和2千瓦两种版本,后者提供更远的传输范围。
通过Nano V2模块,可以为不支持ELRS的遥控器添加ELRS功能。
展示了如何将Nano V2模块安装在遥控器背面,并与Pavo 20无人机进行连接。
说明了如何通过遥控器菜单启用ELRS模块,并展示模块连接过程。
提到了为Nano V2模块充电的必要性。
解释了如何设置无人机以与ELRS模块配合使用,包括在Data Flight软件中的端口设置。
展示了如何将无人机与遥控器进行绑定,以便使用ELRS功能。
提到了使用Aux 2开关来切换不同的角度模式,以及使用另一个开关进行解锁。
讨论了在强风条件下飞行无人机的挑战。
分享了使用Nano V2模块与DJI遥控器2进行比较的体验,强调了ELRS的快速连接优势。
描述了在飞行过程中遇到的一些技术问题,如无人机被树叶缠绕。
提到了Pavo无人机的耐用性,即使在撞击后也能继续飞行。
强调了Nano V2模块的便捷性,可以轻松切换支持和不支持ELRS的无人机。
提到了使用Nano V2模块可以减少携带多个遥控器的需要。
总结了Nano V2模块对于飞行爱好者来说是一个实用的升级,可以提高飞行体验。
视频以感谢观众并预告下一期视频结束。
Transcripts
hey what's up guys so today we're out here with the beta fpv Nano V2 it's a
cool little elrs module that they make um this is the 1 kilowatt module they make a
2 kilowatt module it's going to give you a little bit more range this one's pretty
much just like the normal elrs module but what this will allow me to do is put it on the back
my radio Master put it on the back my radio master that doesn't have elrs and now this
it has elrs you see I already have it set up so it links up with the Pavo 20 but now since I have
this module on the back I have elrs so I can use this remote to fly my tiny drones and my bigger
drones with HD and elrs on them so let's take a look at this all right so with this device what
this allows you to do is basically give any remote that doesn't have elrs elrs just by plugging it
in so actually we'll show you guys real time come up here powering on the remote go in the
menu oh here and then you see Express lrs right there we'll click on it here and you see it's
loading there's nothing there so we're going to plug in the module kind of annoying to get
plugged in plug it in and then you see have elrs on their remote very simple don't really have to
do much all you got you do have to charge this though so you charge it up for a little bit but
once you plug it into the remote it Powers up and you now have elrs on your remote so let's
show you guys what you got to do to set the Drone up to work like this all right so this is what I'm
about to show you is going to be the case for the Pavo and most other beta fpv drones but anything
other than that the settings are going to be a little bit different but concept's still kind
of the same and plug my drone into Data flight connects and then we'll go over to Ports you're
going to want uart 3 open here you want U art 4 on the configuration Side open and then you want
all this Auto disabled auto disabled all that like that and then on the peripherals on the
art 4 line all the way down here you're going to want to change it to VTX MSP plus display
port so I already have that so I don't have to do anything and then you're going to want to go into
it's not configuration it is receiver you going to make sure you're on serial via uart and then
you want to make sure that your receiver provider is Crossfire and then save obviously and then just
go in your mode mod and set your arm and then your angle and your horizon mode then you could
set all the other ranges but um I'm not going to I'm actually take those off so I'm only I'm
not going to permanently run this remote I'm just going to run it for a little bit with this drone
so I don't need everything in here but you see for this setup here we're using aux 2 which is
this switch here for the different angle modes and then arm is going to be this one here so I
mean that's the Drone set up we're ready to bind it so I'm already bound so I don't have to do that
but just don't want to lose this wire is kind of annoying that they have that like that but then
to bind you just want to put the radio and bind mode and then find the little button on the side
of the 03 it's over here hit it with something like I have this file from the 3D printer just
tap the button with that puts it into bind mode and then the two will link up almost immediately
and you'll be ready to fly so let's get out and fly show you guys what this thing does all right
so we're out on location um we're at a little spot by my house little field we got a little
building here um maybe we'll hit the building I don't know we'll see um we got the elrs module
on here remote powered up goggles powered up we got the goggles V2 with the iflight patch
into antenna we are going to power up the Drone everything's going to link up I'm used to Flying
this thing with the DJI remote 2 and with the remote 2 it takes so long for it to link up
with this elrs I'm already linked up I mean it takes more time for the goggles to link up than
it takes for the Drone to link up all right we got some crazy wind over here so we're going to
have to see all right so everything's Linked UP we have the goggles we have video everything I'm
going to start recording right there and put it in Horizon we got a lot of wind out here so it's not
just going to hover like that to send it I don't know how crazy I'm going to be able to get here
because of how windy it is but I'm going to see what I can
do this remotes definitely nice to be flying with this
drone some longer sticks for the shote and this thing will be dialed
I
damn that's unfortunate let's
see come on no something's something's stuck we got the Drone it was just
caught up in some some leaves and stuff so I couldn't couldn't go
but get back
up got hit Acro
mode Let's come back for redemption in this tree oh yeah
I'm flying the nasal quite a bit lately so it feels really slow coming back to
the pava this thing's a really really fun drone to
fly with this elrs module now I can fly it with this remote is pretty lit
see if I can hit these gaps oh let's hit that take me a little bit to get used to these gimbals
Ah that's tough
Mac it's about it for this battery pack though let's bring it
in there we go nice little flight with the radio Master couple little crashes but nothing crazy
pavo's an absolute Beast just bumps into stuff and keeps going all right guys so I
think that's going to be about all we got for you today um we hit a nice little flight there
with the Pavo works great with the elrs and the radio master um great little addition for this
remote add it on to any remote that doesn't have elrs just snap it right on the back like
so and run it with your elrs drones and then you can snap it off to fly your other drones
or you can just leave it on there fly your other drones go back to Flying your elrs drones make
so you'll only need one remote you don't need three remotes anymore you just need a nano V2
so thank you guys for watching and hopefully we'll see you guys in the next video peace out
تصفح المزيد من مقاطع الفيديو ذات الصلة
Easiest DIY Motion Controller for FPV using Betaflight
🔶Mejora Tu SEÑAL RSSI en Tu DRON FPV🔶Prueba y Comparativa Modulo Externo | Super G Nano, BetaFPV
The Ultimate Betafpv Cetus X Kit Review - The Gateway Drug into FPV
【ELRS/drone】BetaFPV⌘Meteor75Pro 簡易設定&さっくりレビュー!!!!【Futaba/ExpressLRS】
BetaFPV Nano TX V2 ExpressLRS Module Review and TBS Tango 2 Module Bay Install
BetaFPV Cetus X Drohne Tutorial mit Crash Deutsch
5.0 / 5 (0 votes)