WATER TEST Boiler and Condensate P Alkalinity, Chloride, Ph
Summary
TLDRThis script outlines a crucial water quality control process for maintaining systems in optimal condition. It emphasizes daily testing of boiler and condensate water, detailing how to collect samples and conduct tests for parameters like P alkalinity and chloride levels. The process includes using tablets and color changes to measure these in parts per million, with corrective actions advised if results exceed control limits. Additionally, it covers pH testing for both boiler and condensate water using indicator strips. The video concludes with a reminder to use proper water treatment products and follow instructions for efficient system operation and compliance with standards.
Takeaways
- 🔬 Regular water quality testing is essential for maintaining a system in top condition.
- 💧 Both boiler and condensate water should be sampled individually for testing.
- 📍 Always take water samples from the same place to ensure consistency.
- 🚰 Allow the water to flow before sampling to clear the line of sediment.
- 🔵 pH alkalinity tests involve using tablets and observing color changes to determine concentration.
- 📉 The calculation for P alkalinity is based on the number of tablets used, measured in parts per million (ppm).
- 🔍 Chloride tests also use color changes to determine concentration, with results recorded in ppm.
- 📊 pH levels for both condensate and boiler water are tested using indicator strips.
- 📝 Record all test results in a waterproof or customized logging system for tracking.
- ⚠️ If test results are out of control limits, corrective actions will be advised.
- 🛠️ Use water treatment products as per instructions to protect and treat systems efficiently.
Q & A
Why is quality control of water necessary for maintaining a system?
-Quality control of water is necessary to ensure that the system operates efficiently and maintains regulatory and OAM specifications.
How often should water quality be tested for a system?
-Water quality should be tested daily to ensure the system is in top condition.
What are the two types of water samples that need to be collected for testing?
-Both boiler and condensate water samples need to be collected for testing.
How should you take the water sample to ensure accuracy?
-Allow the water to flow a bit before taking the sample to ensure the line is free of sediment.
What is the purpose of the alkalinity test in water quality control?
-The alkalinity test helps to measure the pH alkalinity of the water, which is crucial for maintaining the system's optimal performance.
How is the P alkalinity measured in parts per million (ppm)?
-P alkalinity is measured in ppm by multiplying the number of tablets used by 20 and then subtracting 10.
What happens if the test results are out of control limits?
-If test results are out of control limits, water proof will provide advice on corrective actions.
What is the procedure for the chloride test in water quality control?
-For the chloride test, a 50 milliliter water sample is taken, a tablet is added and shaken to disintegrate, and the color change from yellow to permanent orange-red brown indicates the presence of chlorides.
How is the pH level measured for condensate water?
-The pH level for condensate water is measured by adding a pH reagent to a 50 milliliter sample and comparing the color with the pH indicator strips.
What is the significance of measuring pH levels in boiler water?
-Measuring pH levels in boiler water is important for preventing corrosion and ensuring the longevity and efficiency of the system.
What should be done if the pH test results are out of control limits?
-If pH test results are out of control limits, waterproof will advise on corrective actions to bring the pH levels back to the desired range.
Why is it important to follow the instructions on the product datasheet for water treatment products?
-Following the instructions on the product datasheet ensures that the system operates efficiently and maintains regulatory and OAM specifications.
Outlines
🔬 Water Quality Control and Testing Procedures
This paragraph outlines the essential steps for maintaining a water system's quality through regular sampling and testing. It emphasizes the importance of daily testing and the need to collect both boiler and condensate water samples from specific locations to ensure accuracy. The process includes conducting pH alkalinity tests using tablets and a stoppered bottle, with detailed instructions on how to interpret the color changes to determine the parts per million (ppm) of alkalinity. The calculation formula for ppm is provided, and it's mentioned that a system called 'water proof' can offer advice on corrective actions if test results fall outside control limits. The paragraph also covers chloride testing, with similar instructions for sample collection, tablet usage, and color change interpretation, leading to the calculation of ppm for chlorides. The importance of recording results in a logging system and following product instructions for water treatment is highlighted to ensure system efficiency and compliance with regulations.
🏭 System Efficiency and Compliance Maintenance
The second paragraph focuses on the broader implications of maintaining system efficiency while adhering to regulatory and OAM (Operational and Maintenance) specifications. It suggests that following the prescribed procedures and using appropriate water treatment products, as mentioned in the previous paragraph, will help achieve these goals. The paragraph concludes with applause and music, indicating a positive reinforcement of the message conveyed about the importance of proper water system maintenance.
Mindmap
Keywords
💡Quality Control
💡Water Sampling
💡Boiler Water
💡Condensate Water
💡Sediment
💡Alkalinity
💡Parts Per Million (ppm)
💡Chloride Test
💡pH Test
💡Water Treatment Products
💡Corrective Actions
Highlights
Quality control of water is essential for maintaining a system in top condition.
Regular sampling and testing of water is crucial for system maintenance.
Boiler and condensate water should be collected individually for testing.
Water samples should be taken from the same place to ensure consistency.
Allowing the water to flow before sampling helps to clear sediment.
P alkalinity tests are conducted using a 200 milliliter water sample and tablets.
P alkalinity is indicated by a color change from blue to permanent yellow.
P alkalinity is measured in parts per million (ppm).
The calculation for P alkalinity involves multiplying the number of tablets by 20 and subtracting 10.
Water proof or customized login systems can record P alkalinity results.
Chloride tests are performed on a 50 milliliter water sample with specific tablets.
Chloride presence is indicated by a color change from yellow to permanent orange-red brown.
Chloride concentration is also measured in ppm.
The calculation for chloride involves a similar process to P alkalinity, with a subtraction of 20 instead of 10.
pH tests for condensate water require a 50 milliliter sample and a specific reagent.
pH testing strips are used to determine the pH level of water samples.
For boiler water, pH is tested similarly with a focus on the correct range of testing strips.
Water proof systems can advise on corrective actions if test results are out of control limits.
A range of water treatment products is available to protect and treat systems.
Following product datasheet instructions ensures system efficiency and compliance with specifications.
Transcripts
[Applause]
[Music]
quality control of the water is required
to maintain your system in top condition
regular sampling and testing of the
water is crucial and it should be tested
daily before we do the test we need to
collect both boiler and condensate water
individually first take a boiler water
sample from the sample tap then take the
condensate water from before the cascade
tank always take the water sample from
the same place allow the water to flow a
bit before taking the sample this
ensures that the line is free of
sediment pea alkalinity tests take a two
hundred milliliter water sample in the
stoppered bottle provided
one p alkalinity tablet and shake to
disintegrate if p alkalinity is present
then the sample return blue
repeat adding tablets one tablet at a
time
to dissolve until the blue color changes
to permanent yellow
next comes to calculation
P alkalinity is measured in parts per
million in equals the number of tablets
multiplied by 20 then minus 10 for
example if it takes 8 tablets to change
the color to yellow we have 8 times 20
which is 160 minus 10 which is 150 then
record the result as ppm P alkalinity in
water proof or your customized login
system if test results are out of
control limits water proof will give
advice on corrective actions next for
the chloride test take a 50 milliliter
water sample in the stoppered bottle
provided
at one
all right tablet and shake to
disintegrate sample should turn yellow
if chlorides were present
repeat tablet edition one at a time
giving time for the tablet to dissolve
until the yellow color changes to
permanent orange red Brown next comes to
calculation chloride measured in parts
per million equals the number of tablets
added times 20 10 minus 20 for example
if it took 4 tablets to change the color
from yellow to orange red brown take 4
times 20 which is 80 then minus 20 which
is 60 record the result as ppm chloride
in water proof or your customized
logging system if test results are out
of control limits water proof will give
advice on corrective actions pH for
condensate water take a 50 milliliter
sample of water to be tested in the
stoppered bottle provided using the
white 0.6 grams scoop provided in the
kit add one measure of the ph reagent to
the water sample allow to dissolve and
stir if required
select the correct range of pH testing
strip and dip it into the water sample
for approximately 10 seconds
withdraw the strip from the sample and
compare the color obtained with the
color scale on the pH indicator strips
container
pH for boiler water take a 50 milliliter
sample of water to be tested
select the correct range of pH testing
strip and dip it into the water sample
for approximately 10 seconds withdraw
the strip from the sample and compare
the color obtained with the color scale
on the pH indicator strips container
record the result as pH in waterproof or
your customized result logging system if
test results are out of control limits
waterproof will give advice on
corrective actions we have a range of
water treatment products that are
designed to protect and treat your
systems always follow the instructions
on the products datasheet this ensures
your systems operate efficiently while
maintaining regulatory and OAM
specifications
[Applause]
[Music]
تصفح المزيد من مقاطع الفيديو ذات الصلة
WATER TEST Engine Cooling Water Nitrite, Chloride, ph
Boiler water Testing and Treatment, The Unitor way! By an engine cadet
Boiler water and Cooling Fresh Water Test Onboard// Unitor Chemicals!
Explanation of Boiler Feed Water & Its Treatment | Engineering Chemistry
Marine Boiler (a repost)
Introduction to Water Sampling
5.0 / 5 (0 votes)