Link state routing protocols: IS to IS and OSPF
Summary
TLDRDieser Video-Transkript bietet einen Überblick über Routingprotokolle, insbesondere ISIS und OSPF. Es erklärt die Unterschiede zwischen IGP und EGP, die verschiedenen Routingalgorithmen und betont die Vorteile von OSPF. OSPF ist ein Link-State-Protokoll, das effiziente Routenwahl und schnelle Konvergenz bietet. Es unterstützt IPv6 und ist einfach zu konfigurieren. Der Fokus liegt auf OSPF, einschließlich der Funktionsweise von Hello-Paketen, OSPF-Bereichen und den verschiedenen Routerrollen im Netzwerk.
Takeaways
- 🌐 Die dynamischen Routingprotokolle werden in zwei Klassen eingeteilt: IGP (Interior Gateway Protocol) und EGP (Exterior Gateway Protocol).
- 🔄 IGPs wie ISIS und OSPF werden innerhalb eines autonomen Systems verwendet, während EGPs wie BGP zwischen verschiedenen autonomen Systemen verwendet werden.
- 📍 ISIS ist ein Linkstaatesprotokoll, das in großen Enterprise-Netzwerken verwendet wird und sowohl IPv4 als auch IPv6 unterstützt.
- 🛤️ OSPF (Open Shortest Path First) ist ein Linkstaatesprotokoll, das zur Informationsaustausch zwischen Routern in einem Netzwerk verwendet wird.
- 🔄 OSPF ist effizienter als RRT (Routing Information Protocol) und hat eine schnellere Konvergenz.
- 📶 Hello-Pakete (auch bekannt als LSA - Link State Advertisements) werden verwendet, um den Zustand des Netzwerks mit anderen Routern zu teilen.
- 🔢 Die Bereichs-ID in OSPF hilft, die Größe der Linkstaatesdatenbank zu reduzieren und verbessert die Leistung und Skalierbarkeit des Netzwerks.
- 🌀 Der Backbone-Bereich (Area 0.0.0.0) ist ein spezieller Bereich, der alle anderen Bereiche in einem Netzwerk verbindet und für das Routing von Datenpaketen zwischen verschiedenen Bereichen verantwortlich ist.
- 🤖 In einem OSPF-Netzwerk spielen verschiedene Routerrollen, wie ASBR (Autonomous System Border Router), ABR (Area Border Router), DR (Designated Router) und BDR (Backup Designated Router).
- 🏆 OSPF ist beliebt wegen seiner besseren Leistung und Effizienz, seiner Einfachheit bei der Konfiguration und Verwaltung, seiner Unterstützung von variablen Längen Subnetzmasken, seiner Unterstützung mehrerer Bereiche und seiner breiten Unterstützung.
Q & A
Was sind die beiden Klassen von dynamischen Routingprotokollen, die im Skript erwähnt werden?
-Die beiden Klassen von dynamischen Routingprotokollen sind Interior Gateway Protocol (IGP) und Exterior Gateway Protocol (EGP).
Was ist der Hauptunterschied zwischen IGP und EGP?
-IGP-Protokolle werden innerhalb eines autonomen Systems verwendet, während EGP-Protokolle zwischen verschiedenen autonomen Systemen verwendet werden.
Welche sind die drei verschiedenen Routingalgorithmen, die im Skript erwähnt werden?
-Die drei Routingalgorithmen sind Distance Vector, Link State und Hybrid.
Welche Protokolle gehören zur Klasse der Distance Vector Routing?
-RIP (Routing Information Protocol) und IGRP (Interior Gateway Routing Protocol) gehören zur Klasse der Distance Vector Routing.
Was ist ein Hauptmerkmal von ISIS (Intermediate System to Intermediate System)?
-ISIS ist ein Link State-Protokoll, bei dem jeder Router eine Datenbank der gesamten Netzwerktopologie aufrechterhält, was bedeutet, dass er eine vollständige Ansicht des gesamten Netzwerks besitzt.
Warum ist OSPF (Open Shortest Path First) im Vergleich zu anderen Protokollen effizienter?
-OSPF ist effizienter, da es ein Link State-Protokoll ist, das es Routern ermöglicht, eine vollständige Ansicht des Netzwerks zu erhalten und diese Informationen zur Auswahl des kürzesten Weges zwischen zwei Geräten zu nutzen.
Was sind Hello-Pakete in OSPF und welche Rolle spielen sie?
-Hello-Pakete, auch bekannt als Link State Advertisements (LSA), werden von Routern in einem OSPF-Netzwerk verwendet, um Informationen über den Zustand des Netzwerks mit anderen Routern zu teilen.
Was ist die Funktion von OSPF-Area IDs?
-OSPF-Area IDs helfen, die Größe der Link State-Datenbank zu reduzieren, indem das Netzwerk in kleinere Bereiche unterteilt wird, was eine effizientere Verwaltung der Datenbank und eine Verringerung der zu speichernden Informationen ermöglicht.
Was ist der Unterschied zwischen einem ABR und einem ASBR in OSPF?
-Ein ABR (Area Border Router) dient als Brücke zwischen verschiedenen Bereichen innerhalb des autonomen Systems, während ein ASBR (Autonomous System Border Router) für die Verbindung zum Internet oder anderen autonomen Systemen verantwortlich ist.
Warum ist OSPF beliebt, und welche Vorteile bietet es?
-OSPF ist beliebt, weil es ein Link State-Protokoll ist, das eine bessere Leistung und Effizienz bietet, einfach zu konfigurieren und verwalten ist, Variable Längen Subnetzmasken unterstützt, mehrere Bereiche unterstützt, was eine hierarchischere Strukturierung ermöglicht und eine verbesserte Skalierbarkeit bietet, und es ist ein weit verbreitetes und unterstütztes Protokoll.
Outlines
🌞 Einführung in Routing-Protokolle und ihre Klassifizierung
In diesem Abschnitt stellt Sunny zwei Link-State-Routing-Protokolle vor: IS-IS und OSPF. Es wird eine kurze Einführung in IS-IS gegeben, während der Fokus auf OSPF liegt (Open Shortest Path First). Er erklärt die Klassifizierung der dynamischen Routing-Protokolle in Interior Gateway Protocol (IGP) und Exterior Gateway Protocol (EGP). IGP-Protokolle werden innerhalb eines autonomen Systems verwendet, während EGP-Protokolle, wie BGP (Border Gateway Protocol), zwischen autonomen Systemen eingesetzt werden. Weitere Routing-Protokoll-Typen wie Distance Vector (z. B. RIP und IGRP), Link-State (OSPF, IS-IS) und Hybrid (EIGRP) werden erwähnt.
📡 IS-IS: Überblick über das Routing-Protokoll
Hier wird das IS-IS-Protokoll erklärt, ein Link-State-Routing-Protokoll, das in großen Unternehmensnetzwerken verwendet wird. IS-IS bietet eine vollständige Ansicht des Netzwerks, da jeder Router eine Datenbank mit dem gesamten Netzwerk aufrechterhält. Es ist hoch skalierbar, flexibel und unterstützt sowohl IPv4 als auch IPv6, wird jedoch weniger häufig als OSPF verwendet.
🚦 OSPF: Einführung und Hauptmerkmale
In diesem Abschnitt wird OSPF (Open Shortest Path First) detaillierter behandelt. Es handelt sich um ein Link-State-Routing-Protokoll, das innerhalb eines autonomen Systems funktioniert. OSPF hat keine Hops-Begrenzung und verwendet einen komplexen Algorithmus, um den besten Pfad zu berechnen. Es bietet eine schnellere Konvergenz als RIP und unterstützt IPv6 ab Version 3.
📬 Hello-Pakete und ihre Rolle in OSPF
Dieser Abschnitt befasst sich mit Hello-Paketen, auch Link-State-Advertisements (LSA) genannt, die von Routern im OSPF-Netzwerk verwendet werden, um Informationen über den Netzwerkzustand zu teilen. Neue Router senden Hello-Pakete, um sich vorzustellen, und bestehende Router verwenden sie, um Routing-Informationen zu aktualisieren. Router senden diese Pakete alle 30 Minuten, es sei denn, es wird ein Link-State-Problem erkannt.
🏙️ OSPF-Bereiche und ihre Bedeutung
OSPF-Bereiche (Area IDs) helfen, die Größe der Link-State-Datenbank zu reduzieren, indem Netzwerke in kleinere Bereiche unterteilt werden. Dies verbessert die Effizienz und Skalierbarkeit. Ein besonderes Beispiel ist das Backbone Area (0.0.0.0), das als zentrales Element des OSPF-Netzwerks fungiert und für die Weiterleitung von Datenpaketen zwischen den Bereichen verantwortlich ist.
🔄 Verschiedene Router-Typen in OSPF-Netzwerken
Dieser Abschnitt erläutert die unterschiedlichen Rollen von Routern im OSPF-Netzwerk. Dazu gehören der ASBR (Autonomous System Border Router), der für die Verbindung zu anderen autonomen Systemen zuständig ist, der ABR (Area Border Router), der verschiedene OSPF-Bereiche verbindet, sowie der DR (Designated Router) und BDR (Backup Designated Router), die für den Austausch von Routing-Informationen verantwortlich sind.
🎯 Gründe für die Popularität von OSPF
Abschließend werden die Vorteile von OSPF hervorgehoben, wie die bessere Performance und Effizienz im Vergleich zu Distance-Vector-Protokollen, die einfache Konfiguration und Verwaltung, die Unterstützung von variablen Subnetzmasken sowie die breite Protokollunterstützung und Skalierbarkeit durch die Verwendung mehrerer Bereiche.
🎵 Musik am Ende des Videos
Am Ende des Videos wird Musik eingespielt, um den Abschluss der Präsentation zu signalisieren.
Mindmap
Keywords
💡ISIS
💡OSPF
💡IGP
💡EGP
💡Link-State
💡Hello-Pakete
💡Area ID
💡ASBR
💡ABR
💡DR
💡PDR
Highlights
Introduction to two link-state type protocols: ISIS and OSPF, with a focus on OSPF.
Classification of dynamic routing protocols into Interior Gateway Protocol (IGP) and Exterior Gateway Protocol (EGP).
IGP is used within an autonomous system, while EGP is used between different autonomous systems.
EGP includes protocols like One Path Feature Routing Protocol and Border Gateway Protocol (BGP).
IGP includes three types of routing algorithms: distance vector, link-state, and hybrid.
Distance vector routing protocols include RIP, IGRP, and IDRP.
Link-state routing protocols include OSPF and IS-IS.
Hybrid routing protocols include EIGRP.
IS-IS is a link-state protocol used primarily in large enterprise networks.
IS-IS is highly scalable and flexible, supporting both IPv4 and IPv6.
OSPF is a link-state routing protocol used within a single autonomous system.
OSPF has no hop limits and uses a complex algorithm for determining the best paths.
OSPF is more efficient than RIP and has faster convergence.
OSPF supports IPv6 starting from version 3.
Hello packets, also known as Link State Advertisements (LSAs), are used for sharing network state information.
Hello packets are used by routers to introduce themselves and discover other routers in the OSPF network.
Area ID in OSPF helps reduce the size of the link-state database and improves network performance.
The backbone area (Area ID 0.0.0.0) connects all other areas in an OSPF network.
Different roles of routers in an OSPF network include ASBR, ABR, DR, and BDR.
OSPF is popular due to its link-state nature, ease of configuration, support for variable length subnet masks, multiple areas, and wide support.
Transcripts
hello
and this is sunny welcome back today I
will introduce two link State type of
protocols
Isis and ospf but I only briefly
introduce
Isis and focus more on the ospf open
shortest path first
now let's take a look at the
classification of the dynamic routing
protocols
there's a two classes or two categories
of writing protocols
interior Gateway protocol
igp and exterior Gateway protocol EGP
IDP and EDP are different in terms of
autonomous systems where igp type
routing protocol are used within the
autonomous system and EGP type writing
Protocols are used between different
autonomous systems
EGP includes One path feature routing
protocol border Gateway protocol or bgp
used by as border routers
IDP Inc includes three different types
of routing algorithms distance vector
link State and hybrid
the distance Vector routing include RRP
routing information protocol and
igrp interior Gateway routine protocol
link stated type includes
ospf open shortest path first and I S to
is
intermediate system to intermediate
system
the hybrid type the routing includes
only one the eigrp enhanced interior
Gateway routing protocol
intermediate system to intermediate
system
is is2is
is to is
a link State a protocol which means each
router in a network maintains the
database of entire network topology
it also means it has a complete view of
a whole network
which includes all the routers of
locations and Link States
and since of updates about the changes
in the network to all others routers
is to is
used primarily in large in Enterprise
networks is highly scalable and flexible
supporting both IP version 4 and
ipvarian 6 but it's less common than
ospf
so next I will talk about ospf
open shot is a path first
ospf
ospf is linked state routing protocol
that is used to exchange routing
information between routers in a network
it is designed to work within a single
autonomous system
there is no hop limits
it is a complex algorithm for
determining best paths
and each router has a complete view of
the network
it is more efficient than RRP
and the convergence is much faster than
RRP and it also supports IP V6 starting
ospf version 3.
now let's talk about hello package
los8es
what would happen when a new router
joined the ospf network or some link
breaks well that's what hello pack is
coming to play
hello packets are also called link State
advertisements
LSA
it is used by a router on a ospf network
to share information about the state of
network with other routers
lsas contains information about the
routers links networks in the area as
well as the Matrix
such as the cost of Link
a new order will send a Manning a lot
with hello packets to introduce itself
to other routers and to discover other
routers existing routers use hello
packets to update the routing
information and once the convergence is
reached all routers will send each other
hello package every 30 minutes unless
they detect a break in the link state
let's talk about the old SPF area ID
the usable area IDs service several
purposes in ospf
one of the main purposes is to help
reduce the size of the link State
database which is used to install
information about the network
by dividing Network into smaller areas
the link State database can be more
efficiently managed and amount of
information that it needs to be stored
is reduced
this can help to improve the performance
and scalability of the network
as is allows for more efficient routing
of data packets
an area ID is a 32-bit alarm it look
like IP address but it has nothing to do
with IP addresses example area ID
0.0.0.0 Dot
0 also known as the backbone area is a
special area that connects all of the
other areas in a network
it is the core of the ospf network and
is responsible for routing data packets
between various areas
now let me talk about the different
routers on ospf network
in a ospf network different routers can
play different roles for example
asbr router autonomous system border
router
is responsible for connecting the
internet or other autonomous system
ABR router or area border router is like
a bridge connecting
between different OS is like a bridge
between the different areas connecting
with other area
Dr designated router Dr is a mean Roger
in an area which is responsible for one
exchanging routing information with
other routers in the area
two singing and receiving writing
updates to and from other routers in the
area
PDR is a backup designated router is a
backup to the Dr in the area
last Point why ospf is popular there are
several reasons
one
ospf is a link State protocol which
allows a router to get a complete view
of the network and use this information
to choose the shortest path between any
two devices
thus compared with distant vectors
rotting by rumors
ospf offers better performance and
efficiency
so one is better performance and
efficiency
two
is relatively easy to configure and
manage
three
supporting variable length softness
masks which allows for more flexible
subnetting and a better utilization of
IP addresses
4. supporting multiple areas which
allows for more hierarchical writing and
improved scalability
the last point is widely supported
protocol
I hope this video is helpful thank you
very much and see you next time
[Music]
تصفح المزيد من مقاطع الفيديو ذات الصلة
Schweizer DSG erklärt + RICHTIG umsetzen
Belajar Dasar Jaringan Komputer dari nol - Part 2/8 | Pengenalan Jaringan Komputer
If I Started A New Online Business, I'd Do This First
Wie funktionieren SSDs und USB-Sticks? #7
Neuronale Netze unter der Lupe | Die Welt der KI entdecken 10
EPISODE 7 #PINGEXCHANGE
5.0 / 5 (0 votes)